Shopping Cart

Your cart is empty.

Your cart is empty.

HVAC Digital Manifold 2 in 1 Digital Manifold Meter Temp Test for Air Conditioning Refrigeration Systems and Heat Pumps

4.7 (1) Write Review
Free shipping on orders over $29.99

$210.42

$ 99 .00 $99.00

In Stock

About this item

  • 2 in 1 Function: This meter integrates the functions of pressure measurement and temperature measurement, with detection
  • 83 Refrigerants: There is 83 kinds of refrigerants can be selected, you can select corresponding refrigerant according to the usage condition, meet the different needs
  • Clear Screen Display: The screen can display evaporating pressure and temperature, condensing pressure and temperature, the temperature unit can be set to °C or °F
  • Multi Modes: You can choose heat pump mode, cooling mode or automatic mode under cooling or heating mode settings
  • Main Usage: This meter is mainly used in refrigeration system leakage detection, troubleshooting and maintenance, refrigerant charging


Product Description

Digital Manifold Gauge

Specification


Item Type: Digital Manifold Gauge

Material: ABS

Model: ST5750A

Battery: 4 x 1.5V AA battery (without battery)

Usage: Mainly used in refrigeration system leakage detection, refrigerant charging, troubleshooting and maintenance

Basic Parameters:

Pressure Range (Relative Pressure): -100Kpa to 6000Kpa, -0.1Mpa to 6Mpa, -14.5psi to 870psi, -1bar to 60bar

Overload Pressure: 6500Kpa, 6.5Mpa, 940psi, 65bar

Pressure Accuracy: ±0.5%FS

Pressure Resolution: 1Kpa, 0.01bar, 0.1psi, 0.001Mpa (0.01Mpa at negative pressure)

Digital Manifold Gauge

Package List


1 x Digital Manifold Gauge

2 x Temperature Clip

3 x Detection Tube

1 x Manual

1 x Suitcase

Features

  • 2 in 1 Function--This meter integrates the functions of pressure measurement and temperature measurement, with high accuracy detection
  • 83 Refrigerants--There is 83 kinds of refrigerants can be selected, you can select corresponding refrigerant according to the usage condition, meet the different needs
  • Clear Screen Display--The screen can display evaporating pressure and temperature, condensing pressure and temperature, the temperature unit can be set to °C or °F
  • Multi Modes--You can choose heat pump mode, cooling mode or automatic mode under cooling or heating mode settings
  • Main Usage--This meter is mainly used in refrigeration system leakage detection, troubleshooting and maintenance, refrigerant charging

How to Use


1. Connect the 2 temperature clips to the temperature probe interface of the instrument respectively.

2. Power on.

3. Select the refrigerant: Press the "R" key to enter the refrigerant selection interface, press the "△" key or the "▽" key to switch the refrigerant, and press the "R" key again to return to the measurement interface.

4. Select the measurement mode (please refer to "Setting Instructions" for the operation method).

5. Connect the high and low pressure ends at ambient pressure.

6. With no pressure input, if the reading is not zero, press "p=0" key to reset the pressure reading to zero.

7. First close the control valve and then connect the refrigerant hose: connect the low pressure side refrigeration liquid pipe (blue) and the high pressure side (red) refrigeration liquid pipe to the instrument respectively.

8. Connect the liquid tube to the system.

9. Enter the pressure for the measuring instrument.

Digital Manifold Gauge

Digital Manifold Gauge

Digital Manifold Gauge

Digital Manifold Gauge

Digital Manifold Gauge

Digital Manifold Gauge


edilberto
Reviewed in the United States on August 24, 2023
El manifold se ve bien, y parece que al menos puede medir las presiones de alta y baja, pero, a la hora de medir el superheat y el subcooling, presenta errores, no se pueden medir de conjunto pues se alteran dando fallas, parece hay como un corto circuito.