Your cart is empty.
Your cart is empty.Description An Affordable Package to Help Out For Samsung SpaceMaker Ice Maker's Woes! The most common question we get regarding For Samsung Refrigerators is "How can I fix my Ice maker which keeps getting iced over?" The answer is to prevent moisture build-up in the cabinet. There are many ways to do this, including the Secondary Heater Kit we currently sell for the evaporator system. But this kit gives you an additional, affordable way of helping to mitigate the icing issue: by sealing the cabinet, installing drain clips, and the new icemaker retainer (which can get damaged via the icing issue in the first place), and a larger revised drain tube and heater, you may be able to prevent or eliminate icing issues. Our New Revised "Complete Kit", includes the following items: New, Revised DA97-19898A Drain Tube with Pre-Installed 3M Sealant and 2.3w DC Drop-In Heater (OEM Ugpgraded Style) by Choice Parts Mfg. DA82-02367B Y-Clip and Retention Set Silco Sil-Bond RTV 4500 Food Grade Sealant (Info: http://www.silco-inc.com/p_sb_4500.htm) Installation Guide with other additional no-cost fixes and solutions We also offer other kit options such as: DA97-19898A Drain Tube with Pre-Installed 3M Sealant and 2.3w DC Drop-In Heater (OEM Ugpgraded Style) - If in case yours has been damaged, or you've purchased our other kits in the past and need only the drain tube with the revised heater. Icemaker Moisture Kit - This kit is the preferred kit if you are replacing the For Samsung Ice Maker Auger, as the augers we sell will already include the revised drain-tube pre-installed. This comes with the DA82-02367A Y-Clip and Retainer Set, as well as a 3oz Bottle of SIL-4500 food grade sealant. Icemaker Heater Kit Only - If you prefer to only get the heater kit and keep the older style drain tube, you can purchase only the heating system and sealant kit with the Compatible/Replacement for Frost King R3.0 tape and additional HVAC foil tape for sealing the unit. Moisture and Heater Kit Without Tube - This is a more affordable choice without the drain tube, as we produce the heater kit ourselves which is available at a lower bundled price. Installation Guide for Moisture leak kit and heater kit: https://bit.ly/2Ur2n5n This kit will not repair a broken ice maker, or a warped/damaged icemaker box. Other than the control board and icemaker, our kit contains a similar or better solution than For Samsungs to repair your icemaker! In our teardowns of the factory solution, we believe our heater+insullation is superior than the factory, with the clip and retention set being at the same level of quality as the For Samsung kit.
AudioGuyMichigan
Reviewed in the United States on August 29, 2024
I have fought with my Samsung ice maker for literally 5 years. Always freezing up and needing to be manually defrosted about every 3-4 weeks. I have gone through every how to video and applied every fix suggested. Finally, I found this solution suggested. I swapped out the original tube with this one and so far I have not had any frost issues in the I've maker! Hallelujah!
R.B.
Reviewed in the United States on July 7, 2024
The defrost was taking 3 to 4 cycles , no longer , 1 cycle and done . Success .i did read someone had to do some trimming on the main unit for the heater , so did i , side cutters just a little trim to make it sit in flush .
Zak
Reviewed in the United States on October 11, 2024
I can't believe that the problem of icing is solved with KY ice maker. I almost gave up on having the RF263BEAESR samsung ice msker work again. But it is and it is great. Thank you for this great product.I watched the video on YouTube from the dame seller and it was easy enough and worth every minute and every pennyThank you
Recommended Products
$49.99
$ 21 .99 $21.99