Your cart is empty.
Your cart is empty.Product Description
Compatibility
2012-2013 1300 FBC L6-7.6LE-350 Super Duty 2004-2010 6.0L
E-350 Club Wagon 2004-2005 6.0L
E-450 Super Duty 2004-2010 6.0L
Excursion 2003-2005 6.0L
F250 Super Duty 2003-2007 6.0L/2008-2010 6.4L
F350 Super Duty 2003-2007 6.0L/2008-2010 6.4L
F450 Super Duty 2003-2007 6.0L/2008-2010 6.4L
F550 Super Duty 2003-2007 6.0L/2008-2010 6.4L
F650 2004-2008 6.0L/2000-2008 5.9L
F750 2004-2008 6.0L/2000-2008 5.9L
LCF 2006-2009 V6-4.5L
2012-2013 1300 FBC L6-7.6L
2005-2007 3000 CHASSIS V8-6.0L
2006-2007 3000 IC V8-6.0L
2007 3200 V8-6.0L
2005 3300 CHASSIS V8-6.0L
2012 AC COMMERCIAL BUS V8-6.4L
2008 BE COMMERCIAL BUS V8-6.0L
2008-2011 BE SCHOOL BUS V8-6.4L
2012-2013 BE SCHOOL BUS V8-6.4L
2010-2013 CE COMMERCIAL L6-7.6L
2008 CE COMMERCIAL L6-7.6L
2005-2008 CE COMMERCIAL V8-6.0L
2010-2011 CE COMMERCIAL V8-6.4L
2011-2013 CE COMMERCIAL V8-6.4L
Feature
Complete filtration of engine oil, which ensures high performing fuel injectors and long engine life.Optimally screening out 98% of abrasives such as such as carbon, sand, dust and bits of metal before they get into your oil.Helps protect against engine wear.Protect your engine and keep your emissions control systems working properly.Precisely engineered for your Power Stroke Diesel engine.The oil filter should be changed every 7,500 miles under normal operating conditions and 5,000 miles under "severe" operating conditions.
Installation instruction
1.Place a suitable drain pan (minimum 15 quart capacity) below the drain plug.
2.Remove the drain plug with a 19 mm or 3/4" box end wrench and allow the engine oil to drain completely.
3.Remove the oil filter cap on the top of the engine using a 36 mm socket.
4.Pull the oil filter and cap straight upwards to remove it from the filter canister.
5.Remove the oil filter from the filter cap by pulling it away from the cap.
6.Remove the old oil filter cap o-ring, Lubricate the new one with clean motor oil,then install it in place.
7.Install the new oil filter. Note that the oil filter clips into the oil filter housing. You will hear it snap into place if it is installed correctly.
8.Reinstall the assembly and torque cap to 25 Nm (19 lb-ft)
9.After adding the oil,run engine for 3 minutes and check for leaks.
floyd pollard
Reviewed in the United States on May 12, 2025
Wasn't what I quite expected
Bobcat Big Sky
Reviewed in the United States on March 30, 2025
Cap leaks like crazy out of the top. Don't buy this.
Edward Lee
Reviewed in the United States on February 5, 2025
high quality
handymanmike
Reviewed in the United States on August 18, 2024
I ORDERED OTHER BRANDS ON AMAZON ONLY THESE FIT PERFECT, JUST LIKE OEM FILTERS.
Tmraziel
Reviewed in the United States on March 27, 2024
I've used this oil filter for years. Purchased several each year. The price is alot cheaper and I've had no issues at all. I drive a 2010 f250 super duty and really put it to the test towing triple axle trailers
Tony
Reviewed in the United States on December 24, 2024
Its just what I wanted
Mayra Lopez
Reviewed in the United States on December 13, 2024
Great product, good quality.
Kelsey Mifflin
Reviewed in Canada on April 10, 2023
I still run a factory filter but this was a good cheap alternative fits good no problems with it
Matt Lord Jr
Reviewed in the United States on December 8, 2019
Very satisfied the part arrived at the right time and was in perfect condition. Thank you!
Recommended Products