Your cart is empty.
Your cart is empty.Product Description
Fitment
Fit for 2014-2016 Lexus IS250 IS300 IS350 for F Sport Model Only.
- Please check the make, model and year of manufacture, and make sure it fits your vehicle.
At Ikonmotorsports, we are constantly in a pursuit to diversify our product lines and overall improving our customer's experience.
- We offer a variety of auto parts goods. From aftermarket style accessories to OE replacements.
- Our R&D department strives to fabricate new products and designs by working directly with our manufacturers.
- We also aim to provide customers with satisfying experience.
Why Choose Us?
- Strict Quality Control
All of our parts go through extensive durability tests and strict quality control procedures in order to provide you the highest quality product every time.
- Wide Selection of Materials
Everything from cost effective polyurethane to high end carbon fiber materials, we are confident we’ll be able to assist you in finding the right material for your needs.
- Accurate Fitment
We work directly with our manufacturers to design, fabricate, and test fit all of our parts.
Angel Rodriguez
Reviewed in the United States on December 18, 2023
Nunca escribo comentarios al respecto de un artículo.Pero este artículo fue el primero que realmente le quedó perfecto a mi carro. Fácil de instalar y no le quedó pequeño a mi carro. A+++
Matt Anderson
Reviewed in the United States on January 23, 2023
For $100, it looks good.Didn't line up very well on my 15 is350 f sport, wasn't even on both sides.If your not looking to close its fine.For $100 it's not bad but super cheap plastic.Installed it 11 days ago and it already cracked. Threw away $100.
Jayson Vershawn
Reviewed in the United States on July 28, 2021
Guys This Bumper Lip acts as a Front End Wind Spoiler. The proper way to Install; is to also secure it with Hex Bolts as I did here. Don't just use the 6 little screws and go racing down the street. Understand what this is, sure its for looks but it also catches the wind's down force at high speeds. Install it with that in mind. I drilled 10 holes underneath and used 2 large washers per bolt to secure it tightly and professionally as possible. I test drove it at 95mph and it stood the test. I would give it 5 stars but I had to buy bolts to help secure it. But I did it right! and I am 100% satisfied. This is a very good Bumper Lip product for the money. You just have to secure it good so the wind force doesn't blow it off.
Streetlethal1000
Reviewed in the United States on May 20, 2021
Like any aftermarket part, it takes some custom adjustments but if you are at all handy, it’s really not hard to get this looking really good. I used the original holes and then I also added self tapping screws between all the stock holes. I also used double sided 3M tape between the lip and the car and finished it off with two stabilizer bars on each end. I’ve gone “slightly” over the speed limit and this thing won’t budge. The GF even walked by it and hit it with her leg and no damage (I ask if she was ok after checking out the lip first). Also, it’s not that crappy fiberglass crap that breaks, it’s a nice resistant plastic.
Linh Pham
Reviewed in the United States on January 20, 2021
i was driving around 90mph at the track and heard a lot of vibration and rubbing notice. turns out the downforce put presssure on the middle of the lip and the track basically ate it. it was still attached to my car so i would like to assume that the single thin layer lip just flexed into the track at highspeeds... or possibly needs a ton more screws to secure the lip. i'm not sure but what a waste of money.
Nefty Lopez
Reviewed in the United States on July 20, 2020
Honest review! I like this lip because it came with the extended points that are for your original screws from the bottom of your bumper. I put it on myself and held it up with masking tape. I’m probably off by like a couple millimeters but overall I’m happy with this project. I used the original screws from my bumper. I used the 6 screws that it came with for the corners. From the end tip (tire side) to mid center (where the toe hook is at). Those were where the 3 screws were out on each side. Then for the center, I went to Lowe’s and bought 4 more screws (same size or very very close) and put 2 in the very center and then 1 on each side from the tool hook to the center between the original bolts. I’ll submit a picture of underneath with the screws. I used a 9/64 drill bit to drill the holes for the screws it came with and the extra screws I bought. Amazing product! I bought one from another bender and it literally came right off at highway speeds... complete garbage and the vender tried to deny my refund and saying that it was my fault that it failed..... wtf, lets be serious, I have a Lexus, I don’t just want to drill random holes and put absolute garbage on my car every month because they fall off due to poor design or no instructors for your garbage product. Get this lip if you’re looking for a sexy look on your Lexus is250 or is350 f sport.By the way my Lexus IS a 2016lexus is350 f sport and it looks sexy as heck with it on there. I recommend it and buying extra screws. I hope this review helps whoever is buying it or any other lip out there. Use your original screws, the screws they come with and at least 4 more screws (spend the $2-$3 extra. It’s an investment.
Taylor Hansen
Reviewed in the United States on April 5, 2020
I was a little skeptical because it was only $100 but it looks and fits really nice on my 2016 IS 200t F Sport. I used the 6 screws already holding my bumper in place to attach it and the additional 6 screws that the splitter came with to further secure it where it was a little wobbly. It’s held up nicely for a couple months with no damage and it doesn’t rattle or affect driving in any way
Brandon Ortiz
Reviewed in the United States on July 26, 2019
The part looked amazing .. but it’s whatever you get what u pay for. This part is good for maybe 60 mph or 70 max*** after that the air resistance we’ll end up pushing the part and ripping the nails off of the front
Recommended Products
$149.99
$ 70 .99 $70.99