Your cart is empty.
Your cart is empty.Product Description
Established since 2005
IKON MOTORSPORTS is the trusted leading brand in aftermarket auto parts. We own the largest selections of trunk spoiler and also covered bumpers, bumper lips, hood, grille, steering wheel, racing seat, floor mat, window visor, running board and diffusers.
- Please make sure to contact if product received is damaged or has flaws. Bumper cannot be returned once modified or painted.
- CUSTOM FIT FOR SPECIFIC MODEL
All of our bumper lip molds are opened by original cars to perfect fit car models.
- WIDE SELECTION OF MATERIAL
Everything from cost effective polyurethane to high end carbon fiber materials, we are confident we’ll be able to assist you in finding the right material for your needs.
Trouble Free Passing
The front bumper lip makes your car look lower to the ground since it takes up the space below your car’s frame, creating the illusion the frame is closer to the ground. But actually it will not affecting road passing.
Enhance Downforce Effect
Bumper lip is designed to split the air and redirect the wind.
Having a bumper lip on your front bumper helps to enhance your vehicle’s aerodynamics for more stable handling. To some extent, this can also help with fuel economy by decreasing drag.
Protect Front Bumper
A front bumper lip will help protect your car bumper from scrape or damage when you are on a parking lot, going through a speed bump or pulling over.
However, the level of protection depends on the lip material. Our high-strength and durable front bumper lip offer better protection for your car.
Wide Selection of Color
Matte black, gloss black, carbon fiber surface are ready to be painted to match your vehicle!
Glenn Grimstad
Reviewed in the United States on May 12, 2024
I guess I would have expected more. The lip was wrapped in a black bag with no protection from gouges and scratches. The plastic seemed a little warped along the lower front but I was able to make it work. The passenger side where the lip wraps around the fender is short and I could not get the fitment acceptable no matter how hard I tried to align it, it doesn't look great when you look at the corner. With these shortcomings I really can't recommend it. The $60 lip you can get on Amazon fit my WRX better than this.
Jeremy
Reviewed in the United States on November 22, 2024
Some of the WORST fitment I've ever seen for a lip. What a waste of money! Do not buy this junk! Spend the extra money and get something that actually fits. Why would you even send me this?This lip shouldn't even be $50 with this terrible fitment. I want a refund. Send me a box to return this junk
Gordon
Reviewed in the United States on June 2, 2023
I usually try not to buy things off Amazon for my car, but this was a great buy and saved me a bunch of money. Easy to install came with hardware no instructions but you can figure it out pretty quickly.
Felicia Jameson
Reviewed in the United States on January 12, 2023
The product was decent however because it was sent in an oversized trash bag wrapped in tape to hold it on, it was warped and bent. I had to use a heat gun to heat it up in order to get the warp out and have it fit. For the price, I would expect better shipping and handling. It did fit my 2021 STI.
Anthony C.
Reviewed in the United States on May 20, 2022
It’s a good lip especially if you don’t want to break your bank with a $900 carbon lip that’s gonna take a beating if you’re lowered like I am. Some hardware came in but I recommend you get some actual nuts and bolts for the parts you drill into the bumper, the predrilled holes will go perfectly with the nuts and screws that come with it. The sides are very tight but will fit fine once you get them mounted!
Jairo Aguilar
Reviewed in the United States on March 10, 2021
Came on time, looks good, but packaging was a little bit lax. When it came there is a big hole in the box and a couple of nuts and screws were missing. Other than that install was relatively easy I took the bumper cover off of my 2019 WRX to make it easier to put the lip on the underside of the bumper. It comes with a series of bolts, washers and self tapping screws. I found that you really don’t need the bolts and nuts and washers that come with it all you need to do is line up the holes drilled the holes out a little bit larger so you can fit in the pop clips and it’ll hold it and make it easier to install. Also there are little squares on the underside of the lip. Those little squares are where you want to drill in the self tapping screws to hold the lip to the underside of the bumper it helps to fit me in the front so that there are no gaps as well. And lastly the part that wraps around into the wheel well there is nothing there that a hold them in that place in the fitment is A little bit wonky but you can hold them in place with a set of two or three self tapping screws on the inside of the fender well.
Carlos Ernesto Argueta
Reviewed in the United States on November 26, 2021
Need something better than the three piece eBay special but no yet trying to dump a few hundred on aero kits, this is a good solution. Looks good and it took me longer to take the bumper off than you figure out how to mount it. Have a friend help.
brandon m
Reviewed in the United States on September 12, 2020
lets start with the product. ikon produced a great product here. the quality was exactly what i was expecting, minor if any blemishes (a light scuff that was buffed out). fitment is a 9/10. only reason i say that is for 2 reasons, the sides need stretched slightly, which leaves a very small gap on one side in the wheel well. no biggie for me. 2nd reason, u will need to add heat to the item to reform it so it fits snug. this is normal for anything poly or plastic during shipping. lets move on to install. i removed my bumper from the vehicle and installed in my living room. there are a total of 6 holes on the lip. 2 are guide holes that meet up with 2 existing holes on the bumper. those will be drilled out and i added pop clips to secure. the other 4 holes are for the existing pop clips from the splash guard. there are a total of 10 marked locations on the underside of the lip. instead of self tapping screws, i drilled those out and put in m6 bolts, washers, locking washers, and nuts. screws can back themselves out over time, so this is a longer term mount. i am blown away with how much this changed the look of the car. buy with confidence!
Recommended Products
$77.00
$ 35 .99 $35.99