Your cart is empty.
Your cart is empty.Product Description
2000W IMMERSION WATER HEATER-ENJOY A COZY HOT SHOWER ON A COLD WINTER'S DAY
- Heating More Efficient: upgraded heating element, good thermal conductivity porous design, faster heating, effective energy saving.
- High Quality Materials: 304 stainless steel and fireproof fiber materials, long-term use in water without rust.
- Easy to Use: Just dip the heater in water and plug it into the socket, with an LCD thermometer to test the water temperature.
- Easy to Carry: 9.8 inches long, 2.2 inches wide at the bottom and weighing just 0.9 pounds (0.4 kg), it's compact and lightweight, suitable for indoor or outdoor travel.
- Use More Assured: high quality conductive copper wire, stainless steel shell with excellent sealing, can prevent short circuit, effectively reduce the occurrence of accidents.
PACKAGING INCLUDES：
- 1* Immersion Water Heater
- 1* LCD Thermometer
- 1* Cleaning Wire Brush
- 1* Instruction Manual
- 1* Box
Note:
- Always use reliable brand power outlets.
- Steel ball: Due to water quality reasons, after repeated use of the water heater, the surface of the heating tube will produce scale, affecting the heating effect, please use the steel ball to clean up in time.
SPECIFICATION:
- Material: 304 Stainless Steel
- Power: 2000W
- Applicable Voltage: 110V
- Wire Length: 150cm (60inch)
- Heating Parts: 25cm (9.8in)
- Color: Black
INDICATOR LIGHT
The water heater has a waterproof indicator light on the surface. When the red light is on, the water heater has started working. （Please do not touch the liquid with your hands during use）
INDUSTRIAL DESIGN
The surface has a porous design for faster heat transfer to the water, efficient heating, high quality 304 stainless steel housing for long use without rust.
THICKER COPPER WIRE
Compared to other copper wires on the market, our water heater uses a standard thick three-wire ground plug with a thickened design to carry more power and avoid electric shock, making it more safe to use.
CONTAINER FOR USE
- It can be used in containers of different sizes.
- Such as basin, bathtub, mini inflatable and so on.
- Also suitable for portable bathtub, sink heater, bucket heater, soaking water heater, bathtub soaking water heater.
WE RECOMMEND THAT YOU READ THE INSTRUCTIONS CAREFULLY BEFORE USE, HEATING MORE ASSURED!
- Check the water level before use to ensure the water heater is completely submerged.
- When the electric water heater is powered on, do not dip your hand into the liquid.
- Do not plug two heaters into the same outlet, please make sure before use.
- When the liquid in the container is heated, the plug must be disconnected before using hot water to prevent burns or burns.
- Please do not use it continuously for more than 3 hours!
- Finally, please note that immersion water heaters should be kept away from children to prevent damage and accidents.
Dee Dee
Reviewed in the United States on May 18, 2025
I bought this for my cousin to get the bath water hot enough to fill a large tub and keep it hot. Never bathe with it IN the tub, but using it to inch the temperature up for the bath works great!
Kindle Customer
Reviewed in the United States on March 16, 2025
Product works great when old pump heater went out on inflatable hot tub I used one of these. I had to buy two. But I think it was the drop cord that burned up on the first go round not the jester itself but it'll heat 150 gallons from the tap temperature to 104-106 in 6-10 hours dependent upon temperature but usually between 8-10. And if u run the heater through a cycle maybe a cycle and a half a day which is 6 hours it'll be so warm you can't get in it but it will stay warm all day and all night and still be pretty warm at 4am
shermane taylor
Reviewed in the United States on March 10, 2025
Works 💪
Robert N
Reviewed in the United States on April 5, 2025
Works very well, was very helpful to us after Hurricane Helene. Heated five gallons in under 20 minutes.
Lisa Krach
Reviewed in the United States on April 2, 2025
This is an awesome little wand and that helps to heat our jet spa tub more efficiently. Often times we run out of hot water while filling it if we’ve done a load of wash first. This way we get to hold the temperature and it gets really hot prior to entering the tub. I hands down recommend this wand!
FitnessQueen527
Reviewed in the United States on March 25, 2024
This product did NOT do what was advertised. I placed it in a bucket to test it out before putting in the bathtub which was the initial plan. The bubbles (small) appeared and the indicator light came on. I waited for about 20 minutes just before and allowed reasonable time to give the device an opportunity to warm. Followed the instructions, and NOTHING! Water was as cold as it was when I first placed it in the bucket. Tried it a second time, the same EXACT outcome! I removed the device dried it out, wrapped and placed in the box it arrived in, contacted customer service and requested a REFUND. Box/product was turned into UPS, currently waiting for the refund. You may get lucky, but I wouldn’t waste any money. You wouldn’t even give one star, but of course the site needs a rating 😒
Emily Carver
Reviewed in the United States on June 19, 2023
We moved our milking goats to a new barn and there isn’t hot water in it and the furnace (which we used to get hot water in the other barn) is much further away from this barn and we didn’t like carrying water from it. Cleaning my milk machine with cold water leaves a residue and then requires a milk stone build up wash more frequently. I saw this and equated it to a fish tank heater and figured I’d try it. I’m so glad I did! We drop this in our 5 gal bucket and plug it in while we milk. By the time we’re ready to clean the machine (maybe 30ish mins) the water is so hot you can’t put your hands in it! No more cold water cleans and I couldn’t be happier!! Super easy to use and even comes with a thermometer if you need your water to a certain temp!
Robert
Reviewed in the United States on June 16, 2023
I thought I would be able to get a hot bath with this heater. I have a 60 gallon bathtub and unfortunately my hot water heater is small. I am unable to completely fill my tub with hot water. I can get about half way with hot water. I bought this in hopes that it would heat the water when I fill the tub all the way. My water comes out at 96°f. I submerged this heater for 8 hours. The first four hours I wanted to see if the heater would warm the tub on its own. The water dropped from 94 to 87. I left the heater in there longer and the water temp continued to drop. So these don’t work for large amounts of water.
Recommended Products
$299.00
$ 99 .00 $99.00