Shopping Cart

Your cart is empty.

Your cart is empty.

Inflatable Boat SUP Pump Adaptor Air Pump Converter Standard Schrader Conventional Pump Adaptor Air Valve Adapter Pumping Head Connector for Inflatable Rowing Boat,Stand Up Paddle Board,Kayak

Free shipping on orders over $29.99

$4.99

$ 1 .99 $1.99

In Stock

About this item

  • ✒【Easy to Use】:With the valve in the closed position, insert the Schrader valve fitting and rotate to lock in place. Remove the cap on the fitting, and connect a standard electric pump.Because the compressors/tire pumps take time to inflate, it is recommended to inflate the board by hand until it becomes difficult to pump, and then use the adaptor to top off the pressure.
  • ✒【Quick Inflation】: This inflatable SUP valve adapter has easy conversion, and the efficiency of its inflation is quite high.Use your compressor or tire pump to easily reach suggested PSI within 5-10min.
  • ✒【Lightweight & Portable】: Adopt fine workmanship and delicate design, convenient to use. Lightweight and portable, individual sealed package, easy to use and carry.
  • ✒【Universal Valve Adapter】:No need for paddle-specific air pump, the conversion head can connect the ordinary inflatable tube to the paddle.Widely applicable to various canoe, kayak, paddle board, inflatable boat etc. Fits for many brands type Inflation Valves and Board Valves.



Product Description

BUZIFU Inflatable Boat SUP Pump Adaptor --- No need for paddle-specific air pump, making inflation fast,saves a ton of effort

1

2.1

High Quality Materials

Made of high quality copper and rubber materials, it is quite sturdy and durable.

2.2

Inflatable SUP Valve Adaptor

Inflatable SUP valve adaptor, easy conversion,quick inflation.Use your compressor or tire pump to easily reach suggested PSI within 5-10min.

2.3

No Need for Paddle-specific Air Pump

No need for paddle-specific air pump, the conversion head can connect the ordinary inflatable tube to the paddle.

3

Easy to Use and Carry

4

Adopt fine workmanship and delicate design, convenient to use. Lightweight and portable, easy to use and carry.

5.1

5.2

5.3

Universal Valve Adapter

6

Widely applicable to various canoe, kayak, paddle board, inflatable boat etc. Just have fun!

7

  • Specifications
  • Material: Copper + rubber
  • Size: 7.8cm x 3.4cm x 2cm x 0.7cm/3.07" x 1.34" x 0.79" x 0.28" (Approx.)
  • Weight: Approx. 45g / 1.6oz

  • Packing Includes:
  • 1 x Pump Adaptor

  • Notes:
  • Make sure this item fit your boat before you purchase it.
  • Because the compressors/tire pumps take time to inflate, it is recommended to inflate the board by hand until it becomes difficult to pump, and then use the adaptor to top off the pressure.

Stuart
Reviewed in Canada on March 28, 2024
Got it this week and tried with three different pumps and the vulve doesn’t work
jim hardy
Reviewed in the United States on October 17, 2024
This works perfect for my blow up pontoon fishing tube. Great quality.
Ryan Conrad
Reviewed in Canada on July 21, 2023
Pulled out the valve stem for a faster fill
Louise Lacaille
Reviewed in Canada on July 18, 2023
Non comptatible avec les pompes pour gonfler les pneus
Pedro
Reviewed in Australia on April 23, 2022
Works a treat a little slow but better then manual by 100%
Customer
Reviewed in the United States on September 6, 2021
I bought this in lieu of buying a specialized SUP compressor pump...but unlike the special compressors, this really is intended only for the last few PSI, and not the full fill. I experimented and tried a from zero to 5 PSI run, and gave up at around 25 minutes. It was inflating, but soooo slowly. in that period of time it did not reach any registerable PSI. My friend's SUP compressor pump takes roughly the same amount of time of a full manual pump up..about 10-12 minutes. So I wish I had paid more attention, that this is just for topping off, really. If it doesn't work like the SUP compressor, then it's not worth it to me to lug my standard compressor around in addition to the manual pump. I'll just develop really strong tri's. It works as advertised, just be sure you read what they advertised.
R. Spoerry
Reviewed in the United States on September 14, 2021
The second one I bought would not lock in place and I couldn’t inflate my paddle board. The one I bought a year ago worked great but I misplaced it. I don’t know what the difference is.
Theo
Reviewed in the United States on August 22, 2020
Required lubricant. Once lubrication was applied, no issue with fitting properly and worked like a charm. No longer at muscle failure before I head out. Recommend that paperwork be included that provides recommendations and solutions when the adapter doesn’t connect properly.
RLB
Reviewed in the United States on August 12, 2020
Not sure if the connections are incorrect inside the valve or if I just don't have enough surface to tighten the valve but never could get it to latch. Once the connector is inside the valve I was unable to twist with my fingers or with pliers. Seems like structure is solid just couldn't use it. Worked fine with the new Bluefin iSUPs.
Skypilot 18
Reviewed in the United States on July 16, 2020
I bought this to use with my Caribe' Rigid Bottom inflatable. It works great, exactly as advertised. I am using this with my commercial duty air compressor to maintain the inflation of my boat. Although high pressure air compressors are low in volume, this works great for me. Much easier than the low pressure, high volume, foot air pump although it takes a bit longer but zero effort.
Leigh Easterbrook
Reviewed in Australia on February 24, 2020
Great fit with my SUP, blows up to 15 PSI in about 10 minutes.
ereksonj
Reviewed in the United States on August 22, 2019
This adapter appears to be quality made, with a solid design. I couldn't be happier with my purchase.I used it to inflate my DDM Inflatable paddleboard (SUP), equipped with the Halkey-Roberts style valve. With my little Ryobi compressor, it took me about 23 minutes to pressurize my 10' by 6" by 30" board to 13 PSI from a full, but non-pressurized state.
Paul Wagner
Reviewed in the United States on October 8, 2019
This is it! The solution I was looking for. I'm now able to fill up my paddle boards using my Ryobi 18v dual flow air compressor. I start with the high flow side, which gets the paddle board up to around 3 PSI. Then I attach this Schrader converter, set the pressure to 16PSI, and flip the switch.Now...I'm not going to tell you this process is fast. It isn't. With my paddle board, we're talking 15-20 minutes to get it to the appropriate pressure. But it save you the back-breaking effort of using a manual pump, and for that reason it's well worth it.
Recommended Products

$41.99

$ 18 .99 $18.99

4.5
Select Option

$139.00

$ 67 .99 $67.99

5.0
Select Option