Your cart is empty.
Your cart is empty.Product Description
Levi
Reviewed in the United States on January 20, 2025
These wheels look and preform great, only issue I had was a few of the back side screws stripped while trying to get the tires on the rims, other then that they are perfect!
shopper
Reviewed in the United States on August 17, 2024
They look great and way better than stock on the axial 24scx.
Milk Man
Reviewed in the United States on December 13, 2024
I Loved the way these looked, and they are Great for My display I have. If its for a child, I would make sure they are responsible to have toys this size
Chris Jurgenliemk
Reviewed in Canada on September 25, 2023
I bought these for my Axial SCX24 Deadbolt. They fit great, they were fun to assemble, and they look amazing.- The wheels are made of 3 separate aluminium pieces and assembled very well. The machining was very good quality, and all the threaded holes worked perfectly the first time.- The tires are slightly smaller in diameter than the stock ones, but they are approximately 3/8" wider.- The assembled wheel and tire are significantly heavier than stock (to be expected), but I didn't notice any serious loss of power with the stock motor.Some things to note:1. This upgrade along with changing some other components to lower the CoG has made my SCX24 heavy enough to warrant a servo upgrade. (The wider tires may have an effect here as well)2. There are no assembly instructions, and it took a bit to find a YouTube video that showed enough detail for me to learn to assemble them. Once I had it figured out, the process went smoothly actually locking the bead in place.
Nate
Reviewed in the United States on August 18, 2023
Have been running these on mostly rock and dirt/mud surfaces for a few months. Really satisfied with them. I wanted a stock look on my jeep and these are perfect. The tires are pretty sticky and grip much better than the factory tires.Wheels take some patience to assemble, but not a big deal.IMO the foam isn't needed,but at least included if you want to use them.Would buy again for sure.
Austin Blair
Reviewed in the United States on February 10, 2023
I think these are a worth while upgrade for your scx24. The tires are extremely soft and squishy and are way more sticky than stock. The wheels are pretty cool too. Very tedious with just an Allen wrench but once you get them mounted on there it’s completely different. They are the same size as the stock gladiator wheels if not a smidge bigger and they are about a mil wider. All in all I’d say go for it.
Jacote Oake
Reviewed in Canada on January 17, 2023
The media could not be loaded.
Thomas Fichter
Reviewed in Germany on July 27, 2022
Sie kommen als Set Felgen und Reifen zur selbst Montage.Die Reifen haben eine Schaumstoffeinlage die sie fester als die Original Bereifung macht, sie haben vollflächig Auflage und eine hohe Haftung.Die Felgen passen perfekt zu dem SCX24 Bronco, das Rot ist fast das gleiche.Die Felgen sind vierteilig und optisch der Hammer, außerdem bieten sie mehr Gewicht uns so kommt der Schwerpunkt runter.Tip! Ordert gleich die Messing Radaufnahmen dazu dann seid ihr schonmal fürs Crawlen im Gelände gewappnet.
Prinz, Marc
Reviewed in Germany on February 2, 2022
Eins sollte vorab gesagt werden, dass man hier einen Bausatz erhält.Man bekommt zwei Päckchen. Eins mit den Reifen welche mit Schaumstoffeinlagen kommen. Und dann eine Packung mit den Felgen und Schrauben.Jede Schraube die auf dem Foto zu sehen ist muss einzeln eingedreht werden, auf der Rückseite der Reifen müssen auch Schrauben befestigt werden Diese sind allerdings breiter und man benötigt noch einen 2 mm Imbus.Zudem hat die Felge einen Spannring in dem der Reifen eingespannt werden muss. Für den Zusammenbau ungefähr eine Stunde einrechnen. Und befestigt die inneren Schrauben erst wenn ihr den Reifen an die Achse wieder geschraubt habt. Ansonsten passt handelsübliches Werkzeug nicht.Zudem gibt es dazu dann noch aus Alu Hexal Rad Adapter die ihr gegen die Plastik Adapter austauschen könnt.Die Reifen an sich bringen ordentliches Gewicht mit sich. Habe es leider nicht gewogen, aber 70 Gramm können das schon sein.Kauf hat sich gelohnt. Die reifen sind im Durchmesser unwesentlich kleiner als die Original Reifen aber dafür breiter.
Karissa
Reviewed in the United States on September 14, 2021
Little wider than stock. The tires are a little smaller which I liked for the more scale look. Compound is about the same as stock. Id recommend taking the foams out they were to stiff with them for my liking and when installed without foams they hold air which made it a great soft tire off the top then firm down low.The cons: they come disassembled so you will have to out all those screws in.2: the 2 screws on the back that come installed were really tight and if you don't have a good fitting Allen I can see it stripping very easily trying to get them out.3: the slot where the nut goes is small and had to cut the edges of my rc hex tool to tighten them.
Robert Dennis
Reviewed in the United States on December 7, 2021
These look great.I'd recommend these along with any of the Injora wheel lineup.Price was great for what's in the package.4 wheels 4 tires with foam in.And they look fantastic.Take it easy with the screws when building. These are small and it doesn't take a lot of torque. You can strip them if you're too rough.Five star. Great product.
Phillys von Wirth
Reviewed in Germany on December 29, 2021
Die Felgen sind komplett aus Metall gefertigt und haben somit ein deutlich höheres Gewicht als die originalen. Die Montage ist etwas fummellig wobei die Passgenauigkeit sehr gut ist. Optisch defitniv ein Highlight.
Frank
Reviewed in the United States on December 27, 2021
I haven't run these yet...see below, but they look great, feel great, and went together without issue. I have assembled one set of RC beadlocks before, but they were 2.2", so I was concerned about how difficult these may be to put together considering their size and the sheer number of tiny screws. Happy to say that while tedious, everything went together like butter. No screws stripped and there were only 2 or 3 that felt a little gritty when installing. All holes lined up and the beads on the tires are even on all 4. The caveat is that the my 4mm nut driver from my Dynamite kit for the wheel nut will not fit in the hole between the "lugs" to install the wheel nut. But that is my problem, not a product issue. Just something to be aware of. Off to find/make the necessary tool...
Recommended Products
$224.00
$ 93 .99 $93.99