Your cart is empty.
Your cart is empty.Tap carded 10MM-1.25mm. Made of shock-resistant and heat treated S2 steel for maximum strength and hardness, ideal for maintenance and repair work, manufactured in United states.
Customer
Reviewed in the United States on August 27, 2024
Worked well for weld nuts for hitch 2016 crv , hitch is on , time to star saving for a transmission
Adrian A.
Reviewed in the United States on July 29, 2024
Does it's job with ease, just remember to always keep the tap lubed with cutting fluid or wd-40! I've used this to tap threads into aluminum, cast iron, and steel, works flawlessly.
Jimmah
Reviewed in Canada on November 3, 2023
Perfect.
donkpow
Reviewed in the United States on April 21, 2021
Tapped the threads after drilling out a broken Subaru pinch bolt
Michael Hsueh
Reviewed in Canada on September 2, 2019
Worked perfectly to clean out the treads to mount my hitch on a Honda.
MRoad
Reviewed in Canada on July 17, 2019
I used this to clear threads for trailer hitch welded on bolt on Honda CRV. This is useful for older vehicles with exposed holes. The muffler side was a bit more gunk see pick. Worked perfectly, fast shipping. This is a top quality tool.
Alfred Carrafiello
Reviewed in Canada on May 23, 2019
Metric tools are are difficult to find so I was happy to find one at a reasonable prize and delivered promptly.
Ronald mcMillan
Reviewed in Canada on March 31, 2019
Looks great have not used yet , did not know channel lock were made by Irwin til after buying ,great price
HankRetiredEngineer
Reviewed in the United States on August 10, 2018
I bought this just in case my 10mm bolt holes were rust damaged with time. Turned out I was able to clean the bolt holes with lubricant and stiff cylinder brush. Still, I'm glad I have this in case I have any 10mm threads to redo.
Outbackwack
Reviewed in the United States on July 18, 2018
Worked great for the 1 and only time I needed it to mount a tow hitch. The holes were filled with New England rust and debris... what a PITA to turn this bit by hand for an hour to clear out 4 holes... but it worked great and still looks brand new!
R. S. Lytton
Reviewed in the United States on March 3, 2018
Well made tap--actually used it to chase bunged-up threads on a driver's seat carriage with some 3-in-1 oil for lube. Worked perfectly and was easy to extract (went slowly in both directions). I also got the Hanson 12002 T-handle tap wrench. The wrench fits this tap but it maxes out the wrench chuck. No complaints.
HockeyJoe
Reviewed in the United States on May 16, 2017
This tap was a life saver. I purchased a trailer hitch for my Honda CRV. Upon starting the installation, I discovered the threaded mounting holes in my CRV were rusted and appeared to be unusable. I have a cheapo tap set at home that would not start into the rusted holes. I assumed they were rusted beyond repair. Ordered this tap hoping it might work where the cheap tap couldn't, and I was able to clean out and use the 4 holes in the CRV chassis that I thought were unusable, avoiding a helicoil headache. The point is, it pays to buy quality tools. This is a quality tool.
Not your avg. Bobby
Reviewed in the United States on November 16, 2012
bought some motorcycle clutch and break controls that had an untapped hole for the mirrors. The descriptions didn't tell me that. I guess you have to get mirrors that were designed to be through bolted. Well this fixed it pretty quick. The controls were aluminum so I didn't exactly push it to the limit but I would expect this manufacture to a mid grade tap. If you've never used a tap before I'd watch a few how to videos. When I was in tech school for machining a busted a good quality tap in 3/4" aluminum because I didn't break the chip. I thought, "I've done this all day long on different grade of steel I'll just cram this right through this aluminum!" and then I learn how to dig out my first tap. There's just a slight trick to it but easy to pick up.
Recommended Products
