Your cart is empty.
Your cart is empty.Jacquard Photo Emulsion & Diazo Sensitizer for silk screening. Mix together, following the instructions, then squeegee on the outside of the screen
G. L.
Reviewed in the United States on March 5, 2025
Like many other experienced, no matter how long I expose there is no reaction to the light. I contacted Jacquard, and they confirmed that the sensitizer must have been bad. They check the batch number and it was not expired, so they said they would send me a replacement. It has been over 5 weeks and I still have not received anything. I reached out multiple times and get the runaround that the shipping department forgot, but they are sending it soon... and now they do not answer at all. If you do not want to replace your defective product, than just do not offer to do so. I will just go back to the other big brand that had always worked for me in the past. I can forgive a bad batch of product, but not a customer service that clearly does not care.
Matthew C.
Reviewed in the United States on August 14, 2024
I feared I'd get an leaked jar of emulsion, but it was packaged in a bubble mailer, inside another mailer. I do find it odd the company doesn't put a seal on the top of the jar, like inks, and other things, so make sure you don't tilt when opening. As with other emulsions, I wish the container would have a half way mark or a unit of measure to go by. if it was made out of a material that is easier to see through that'd help. All mixed and ready to go.. Curious to see how this goes after using ulano proclaim for years.. I was out, I was in a pinch, and it is for a small project. I was able to coat 5 17x21 screens and had some left over.Not sure what to think. it went on great. I exposed it more than enough (500w, 15-20 min, from 18inch), yet after 1 clean up, the emulsion started washing off. I still have 2 screens coated and in the darkroom, but i now missed my deadline for the project. will have to research it more.. I guess I should have stuck with proclaim.
Permanent Vocation
Reviewed in the United States on October 24, 2024
Can I tell you just how wonderfully different this emulsion is?!?! Last time I ordered an emulsion I went “on the cheap” and have been a bit disappointed since - especially since I couldn’t reclaim the screens with a bleach solution [not that I’m recommending that]. But it was like magic when I used this again and the image areas washed out almost immediately. If you knew how “rustic” my process is - with a halogen work lamp to expose ink jet printed transparencies - you’d realize how receptive this emulsion in. As I keep it in the ‘fridge, I’ll be thrilled for at least three more months. Thank you for providing such a quality product!!!
Customer
Reviewed in Canada on June 20, 2023
Have bought this specific emulsion multiple times now and have had good results with screens and is pretty easy to work with. Lasts pretty long too once mixed if kept in the fridge
Honestly, don't bother
Reviewed in Australia on June 17, 2023
I honestly wanted to trust this product, but after three failed attempts and watching thousands of youtube videos, reading how to on reddit forums, even watching their tutorials the emulsion did not work.I followed the exact processes of everyone, even one user on here that said to leave it for 10 hours, I I applied three coats evenly, let it dry till it was not wet to touch, exposed under the right conditions with the right lamps for the right time and even longer on the third time - even left it for an hour and it did not burn.I am not touching this product again, i have lost a week's worth of waiting for this too dry and $65 down the drain quite literally.
Norma
Reviewed in the United Kingdom on September 28, 2019
I did find this difficult to apply...but it was the first time I used it.recomedyou buy some cleaner to remove after use
thinksojoe
Reviewed in the United States on July 4, 2019
So I'm giving this a 4-star review, but don't let that stop you from buying this product. I've just not had good luck with it, and I don't think most of that is the product. First I had a mesh count that was too high so I could never get a good burn that didn't wash out. This last time I don't think I exposed it long enough - that's on me, not on Jacquard. I re-coated the screen and tried again the next day, but it didn't burn at all, but my guess is that the space where I was drying it wasn't completely dark, again, on me.
Carmelo Alba
Reviewed in Italy on December 13, 2019
Arrivato prima del previsto. Prodotto buonissimo.. consiglio..
Coconut
Reviewed in the United States on May 17, 2018
I'm giving this a five even though I have, what will sound like, a negative review. This stuff works, and probably well for what it is intended to work on, but I bought it for something completely different so, I want to warn anyone thinking of doing the same thing to STOP, don't try it.This stuff is made for silk screening, and having done a lot of silk screening in my day, I'm very confident it will work fine for that. It doesn't work on metal though.I knew this going in, but I really didn't want to buy a whole big roll of photosensitive film for the small project I am doing. This was cheap and I figured even though I wasn't going to use it all, it would be cheaper than buying a giant roll of film for twice the price and not using it.I don't etch all that much. When I do, I primarily etch copper or brass for model parts. I can go five years before that is necessary since I can also cast or machine small parts. But, very rarely, I need more detail than either casting or machining can provide; then I need photo etching.I thought I could make this work, but the emulsion just won't stick that well to metal, no matter how well you clean it or prep it. I tried 4x before giving up. I'm ordering the more expensive photosensitive film and trying to figure out what I need to silk screen. Also, this stuff really stinks (odor wise) and I got a head ache in a well ventilated room, so I used a respirator the next time and all was good. The thing is it does come out of the wash very crisp, but there is a very thin deceiving layer left behind and you can't have that with etching. If you try to remove that, with water or a brush, it destroys the detail (on metal). I'm sure silk will prevent that over washing from happening.
Ana Minaburo
Reviewed in France on March 29, 2017
C'est facile a utiliser, et l'ecran est de bonne qualité, par contre le pot indique au'il faut changer le couvercle, alors que c'est 2emem couvercle n'est pas inclu. Pour le moment le produit est dans son pot d'origine avec le couvercle d'origine, j'espere qu'il marchera bien la prochaine fois
Recommended Products
