Shopping Cart

Your cart is empty.

Your cart is empty.

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-100PSI, Universal for Auto Truck SUV Motorcycle ATV RV

Free shipping on orders over $29.99

$21.84

$ 9 .99 $9.99

In Stock

1.Color:Blue Case


About this item

  • Fitment Type for JIFETOR TU-113 Fuel Injection Gauge: The car fuel pressure diagnostic test kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or high pressure fuel track on direct-injection engine, due to the fuel gauge's low pressure range
  • 3 Connection Types for Fuel Pressure Gauge Tool Kit: The set is equipped with various fittings and hoses to connect for testing. 14 inch hose is used for hooking up directly to the 1/4 inch SAE standard Schrader valve on fuel pump, 11 inch hose for the small Schrader valve (for some Ford), and 8 inch hose for M6 fuel pressure test port. 1/4 inch barbed brass fittings is direct for special test outlet on engine, and aluminum tee splices in-line between the fuel pump and engine for most vehicles
  • Primary Fuel Pressure Test Kit: Pressure gauge adopts rubber cover protected 2-3/4 inch large dial with 0-100 pounds per square inch range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. Please note, there is no pressure relief valve and drain hose, please wrap cloth around hose connection before relieving pressure from fuel line and removing testing components
  • Check Fuel Injector Pump Pressure: The pressure gauge is designed for checking the fuel injection pump pressure easily and quickly. You can compare the pressure value to the manufacturer's recommended reference range, aid to diagnose gasoline engine fuel system. Low fuel pressure can be caused by kink/leak/clog on inlet supply side components, a bad fuel pump or fuel regulator, low tank pressure. High fuel pressure may caused by a defective fuel pressure regulator or kinked outlet return line
  • Necessary Fuel Oil Injection Pressure Tester Tool: Testing fuel pressure is an essential part of the troubleshooting process of fuel injection system. Proper fuel pressure is vital for engine operation and performance. Too high fuel pressure can cause the engine to run too rich, incomplete combustion, excessive fuel consumption, increased carbon buildup, exhaust exceeding the standard. And a low fuel pressure will lead to a lack of horsepower, stalling, and a slow or no-start condition



Product Description

Engine gauge Test

JIFETOR Fuel Injector Pump Pressure Gauge Kit

  • 1x 3" Large Dial Pressure Gauge
  • 1x 14"L Long Hose
  • 1x 11"L Medium Hose
  • 1x 8"L Short Hose
  • 1x Brass Fittings (1/4" Barbed x 1/4"-18NPT)
  • 1x Tee Fittings (Aluminium tee parts 1/4" & 3/8" barbed x 1/8"-24NPT & brass parts 1/8"-27NPT x 1/4"-18NPT)
  • 1x Hose (1/4" I.D. x 2-1/2"L)
  • 1x Hose (3/8" I.D. x 3"L)
  • 2x Hose Clamps
  • 1x Instruction
  • 1x Red Blow Molding Case, 12-1/2"L x 10"W x 2-1/4"H
NECESSARY FUEL OIL INJECTION PRESSURE TESTER TOOL

NECESSARY FUEL OIL INJECTION PRESSURE TESTER TOOL

  • Testing fuel pressure is an essential part of the troubleshooting process of fuel injection system. Proper fuel pressure is vital for engine operation and performance.
  • Too high fuel pressure can cause the engine to run too rich, incomplete combustion, excessive fuel consumption, increased carbon buildup, exhaust exceeding the standard.
  • And a low fuel pressure will lead to a lack of horsepower, stalling, and a slow or no-start condition.

APPLICATION RANGE

Hook up fuel pressure test port directly

1. Fuel injection pressure is less than 100PSI: perfect for most gasoline/gas engine fuel injection system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or direct-injection engine.

2. Check if your vehicle's fuel pressure can be tested by one of following 3 connection styles:

Hook up fuel pressure test port directly

14"L long hose brass fittings is used for the 1/4" SAE standard schrader valve on the fuel rail or fuel pump. 11"L medium hose fittings is used for the small schrader valve (applicable to some Ford models), and the 8"L short hose for M6 fuel pressure test port.

In-line connection

Aluminum tee with brass fittings allows to test the fuel pressure for most vehicles, by splicing in-line between the fuel pump and engine.

In-line connection
fuel injector pressure tester gauge

Special test outlet connection

There is a 1/4" barbed brass fittings, and it can connect the pressure gauge directly to special test outlet on engine by the 1/4" cut small hose.

NOTE

  • 1.Please wear gloves and goggles when use.
  • 2.These auto fuel oil engine diagnostic gauge injection pressure tester set should be used by professional or under the guidance of a professional.
  • 3.Always refer to equipment manufacturer's operation instruction, compare to the manufacturer's recommended readings.
  • 4.Before making connections and testing, place a dry chemical (Class B) fire extinguisher nearby.
  • 5.Gasoline is highly flammable. Do not smoke, or test near open flames or a source of electrical sparks. Do not allow gasoline to come in contact with the hot manifolds or other engine components.
  • 6.Perform service in a well-ventilated, outdoor location. Not only are gasoline fumes flammable, but carbon monoxide is produced by a running engine. This is a deadly gas that you cannot see or smell.
  • 7.Make sure all connections are tight to avoid fuel leaks. Or use PTFE tape if needed.
  • 8.There is no pressure release valve and drain hose, please wrap cloth around hose connection before relieving pressure from fuel line and removing testing components.

David
Reviewed in the United States on August 23, 2024
Fuel Pressure gauge itself ran great, and measured what I needed it too. However, the pin on the fuel pressure gauge got stuck INSIDE the truck fuel pressure test valve, and left the gas line open ON THE FIRST USE. I did not notice at first, and when I started the truck, fuel sprayed everywhere inside the engine bay.Now the fuel pressure gauge is broke, and the truck fuel pressure valve needs to be fixed. Poor quality craftsmanship, and the metal on the gauge seems to not withstand much handling.
spudanddomieshort
Reviewed in the United States on July 22, 2024
used this to troubleshoot injection system on my boat.. Worked well and helped diagnose my fuel issue
sebastien
Reviewed in Canada on January 10, 2024
Très bonne qualité
James Michael Stephenson
Reviewed in the United States on April 4, 2024
Told me what I needed to know. It had the right fittings. I'm happy.
NAPOL
Reviewed in Canada on July 17, 2023
A+
Kevin
Reviewed in the United Arab Emirates on February 12, 2023
Does what it was intended to do.
Bruce
Reviewed in the United States on December 14, 2023
Very accurate and easy to use!
donald
Reviewed in the United States on November 14, 2023
Everything you need to complete job.
Mark S.
Reviewed in the United States on January 29, 2023
I used this to diagnose a Buick 3800 with a possible fuel pressure issue. Worked perfectly, saved me the cost of a fuel pump. Has adapters for most vehicles on the market. I hope to get a lot of years out of this. A bit of silicone on the gaskets annually keeps the seals worthy.
Michael R.
Reviewed in the United States on August 13, 2022
This is a nice kit for the price. It does not work on my 94 F150. The attachment will not depress the valve to allow a reading. I'll be returning this.
Gerald
Reviewed in the United States on April 20, 2022
Purchased this item to test the fuel pressure on my 1991 Geo Metro. Gauge was easy to use and appears to be accurate. Only drawback was that the included hose clamps were a little funky...a little surface rust, and the hex head fit no known socket, U.S. or metric. But a screwdriver saved the day, so all is well.