Your cart is empty.
Your cart is empty.Product Description
PR-3 Ring Roll Bender, 3inch Manual Roll Bender,Manual Sheet Steel Ring Roll Bender up to 1/4" round bar and 1" x 3/16" flat bar, easy to operate.
- 3 Rolls, two driven rolls powered by a manual crank
- Steel capacity up to 6.5 mm and suit 25x4 mm flat bar
- 340 mm length crank handle
- Top roll adjust depending on the desired bend
High Ability
- The KAKA Industrial handy ring roller is designed to make metal rings with 3 inches or larger diameter. The max rod bar capacity for flat bar stock is 1/4" and 1"x 1/8". This quality handy ring roller is essential for producing chandeliers, plant holders, and candle holders.
Flexible Design
- The hardened-process roller set surface to ensure a prolonged service life. The machine is tiny, easy to carry, and easy to operate. Although small, the bender is a workhorse when the job is right.
Wide Applications
- The manual machine is a versatile tool used in various applications across different industries and tasks, including custom metal fabrication, artistic metalwork, repair and restoration, prototyping, and DIY projects.
Specifications
Portable Design
The machine is tiny, easy to carry, and easy to operate.
High Quality
All surfaces are heat-treated and hardened for long life.
High Ability
The handy ring roller is designed to make metal rings of 3-inch diameter and more extensive.
Saul
Reviewed in the United States on May 4, 2024
Herramienta de gran utilidad y versatilidad
A. Berger
Reviewed in the United States on September 7, 2023
As some others have said: the pin for the handle doesn’t drive, so I had to use a bolt; the two piece handle (obviously for shipping) loosens (I used locktite but I might just weld it); the rubber handle doesn’t spin, so it is awkward when doing more than one piece; if you have to replicate a radius, you need to mark the adjusting wheel or something. None of these things would cost money if just engineered better.I fabbed a mounting bracket that I could clamp into my vise/vise stand. The dimensions happened to all work so I could turn the crank freely and position material without it hitting the vise etc. See pics.The instructions included are “spartan”. A QR code to an online manual and some tutorials wouldn’t cost as much in printing and be much more useful.All in all, for the price, a decent tool. But with just a few mods, it could have been so much better…
Marc gagnon
Reviewed in Canada on September 16, 2023
Très pratique
Darrell
Reviewed in Canada on October 30, 2023
Works fine but be aware that the 1” is as wide as this can handle, and as for thickness, less than 1/8”. Other than the limitations on this roller, it’s well made and does (just) what is advertised. Would recommend it on its quality built.
dave w.
Reviewed in the United States on June 6, 2022
I'm using this to make indestructible plant cages. My dog tramples all my flowers along my fence, and runs rite thru the chintzy store bought cages. Enter the KAKA. I've rolled out 8" diameter rings w this and it works great. 2 rings, 3 uprights and a few welds.....viola.
Pete
Reviewed in Canada on September 15, 2021
Worked well on 3/16 rod for my project. My only complaint would be about the 2 piece handle. It's very difficult to operate as it constantly wants to come apart. I plan to weld these two sections together to fix this issue.
P. Prince
Reviewed in the United States on May 16, 2021
Rolled a pair or 4 1/2 ID rings using 1x1/8 A36. Simple enough! I used a file to cut a nick in the adjuster knob so I could count turns and get back to a previous point of adjustment. Very helpful. If you want to make multiple rings cut multiple pieces of stock and run them all through, one pass each before you adjust the knob. This is a low cost tool so don’t expect too much. If you are working around your house and need a part now and then it will do fine. If you are planning on using this tool to make money with it it will probably drive you nuts! I recommend it for the homeowner.
dan b.
Reviewed in Canada on May 10, 2021
Works great!It would be nice if the rollers could fit 5/16” or 8 mm diameter material.
Cubby
Reviewed in Canada on March 15, 2021
Item is as described, well built, except handle is in two pieces, probably for packaging purposes, but a little welding will fix that! Delivery was prompt. Great tool for bending and making circles with round and flat stock for x-mas decorations.
tom jones
Reviewed in the United States on April 26, 2021
If your trying to make rings, this is want you don’t want. I tested them all, Baleigh, Woodward, harbor freight and Kaka.Only Kaka rolls straight 1/4” rods, I even rolled 5/16” but that puts a lot of stress on the unit and I don’t recommend.All in All it’s the best ring roller on the market. Take it from someone who has tried them all!
kimberly
Reviewed in the United States on August 5, 2020
It is a decent ring roller. Some thread locker helps the two part handle.
Jeff C.
Reviewed in the United States on February 5, 2020
Fantastic, sturdy machine. Bends 3.8mm mending plates with ease!
Customer
Reviewed in the United States on May 21, 2017
Came way to greased up. Quality isn't all there for a $100 but all and all I would buy again
Recommended Products
$678.99
$ 99 .00 $99.00
$181.33
$ 80 .99 $80.99