Shopping Cart

Your cart is empty.

Your cart is empty.

Kamoer KVP04 small vacuum pump 12V micro air pump brushless motor PWM speed control high negative pressure(40Kpa) long life mini diaphragm pump 1.1L/min 320MA

Free shipping on orders over $29.99

$32.08

$ 16 .99 $16.99

In Stock

About this item

  • KVP04 vacuum pump motor: DC brushless motor,Voltage: 12V,Flow rate≥1.1L/min,Load current: 320mA,Noise: 50dB,Positive pressure: 90kpa,Negative pressure: -40kpa,Lifetime: ≥3000H,Net weight: 40g Temperature: 5~50℃,Humidity: Less than 90%
  • The diaphragm vacuum pump material is EPDM, which has good resistance to chemicals such as alcohol, acid, alkali, oxidant, ketone and grease, and has strong chemical stability.
  • This vacuum pump can run dry, good durability, maintenance-free, good airtightness, low noise. It can carry out PWM speed regulation and wide range flow control.
  • Vacuum pump applications:Laboratory,Chemical,Pharmaceuticals,Environmental,Transport,Food and beverage,Instruments and equipment,Inkjet,Electronic industry,Atomic energy.
  • This vacuum pump is equipped with green rubber shock absorbing sleeve to protect the pump body and fix the product, thus reducing vibration and thus noise.



Product Description

Kamoer KVP04 series small diaphragm air pump.

KVP04

Basic parameters

  • Name:KVP04
  • Motor:DC brushless motor
  • Load current of 12V:320MA
  • Load current of 24V:170MA
  • Flow rate≥1.1L/min
  • Noise: 50dB
  • Positive pressure: 90kpa
  • Negative pressure: -40kpa
  • Lifetime: ≥3000H
  • Working temperature: 5~50℃,Humidity: ≤ 90%
  • Size:Length: 59.5mm,Diameter: 24mm
KVP04

  • KVP04 is a high negative pressure pump with negative pressure up to 90KPa.(Data from Kamoer Lab)

  • Principle:KVP04 gas diaphragm pump is a miniature DC brushless diaphragm air pump, which is designed according to the principle of volumetric pump. It is powered by the rotation of the motor, through the eccentric wheel on the motor to drive the rubber cycle, reciprocating motion, in the chamber inside the formation of suction, discharge action. Through the closure and opening of the one-way valve, so as to achieve the inhalation and discharge of gas.
KVP04

  • Adopt brushless motor, long life, after continuous testing, the motor life can reach 3000 hours. (Data from Kamoer Lab)

Brushless motor wiring method

  • Brushless wiring full speed operation: red wire connected to the positive pole, black wire + white wire connected to the negative pole.
  • PWM speed board wiring: red wire connected to the positive pole, black wire connected to the negative pole, yellow wire connected to the output signal, white wire connected to PWM speed control, green wire ground wire left empty.

Note: Connecting the wrong line will lead to motor burnout, please strictly follow the wiring way wiring.

  • Motor introduction:Motor circuit protection function. The circuit protection device will be triggered when the following conditions occur.

  1. When the current exceeds 1A.
  2. When the motor temperature reaches 165±15°C.
KVP04

  • The diaphragm material is EPDM, which has good resistance to alcohols, acids, alkalis, oxidizers, ketones and greases, and is chemically stable. (Mineral oil and strong corrosive vapor liquid are not applicable)
  • With a green protective shock-absorbing sleeve, not only can protect and fix the body, but also can effectively reduce the noise.
KVP04
KVP04
Daijing new

Victor Dela Cruz Jr
Reviewed in Canada on October 31, 2024
I haven't try it yet, but I'm expecting a good outcome. My only concern is the wires of connector are so thin, I think the seller should give 1 to 2 spare connectors incase we accidentally snap it.How can I contact you seller?I have some question regarding wire connectors
Process1
Reviewed in the United States on September 7, 2023
Pumps worked great with speed control.
Superpanda
Reviewed in the United States on June 24, 2022
Ordered 2 separate times. Green mounting not included.