Your cart is empty.
Your cart is empty.The Kuryakyn 7509 driver floorboard spacers allow you to move your stock driver boards outward 3/4". It doesn't sound like much, but now you don't have to hug the gas tank with your thighs to get your foot fully on the board. You're also alleviating some heat build-up by allowing the hot air to get out between your leg and the bike. All bolts are stainless and the spacers are powder coated black for durability. Includes (1) spacer plate with 6 holes, (3) 1/2" I.D. round spacers, (2) 5/15"-18 x 1 3/4" hex head cap screws, and (3) 1/2"-13 x 1 3/4" socket head cap screws; suggested for installation (not included): 1/2" combination and socket wrenches, 3/8" allen wrench, bike lift, or blocks to hold bike upright without kickstand. The Kuryakyn 7509 driver floorboard spacers are compatible with Harley-Davidson models: '09-'19 Electra Glides, Road Glides, Road Kings, Street Glides, and '09-'13 Trikes.
Customer
Reviewed in the United States on March 6, 2025
Work well, move your floorboards away from motor about 1extra inch
Panhead Dave
Reviewed in the United States on September 12, 2024
Just what you need to get your feet spaced out from the hot engine.
John-paul Teatero
Reviewed in Canada on June 10, 2024
They bolt right on and fit great !
Aaron L Ellsworth
Reviewed in the United States on January 5, 2024
Arlen Ness Deep Cut floorboards were a bit cramped. In fact, the rear brake arm was rubbing ever so slightly on the floorboard. These 3/4" spacers rectified that completely. Plus, it makes for a more comfortable riding position. There are less expensive alternatives, but this spacer kit was one of the only ones I could find that came with stainless hardware. While they were a bit expensive, I feel much better knowing that the hardware won't rust. Would definitely recommend to any rider looking to space their floorboards out a little further.
Pgbc
Reviewed in Canada on August 9, 2021
Good product, fast shipping. Used on 2019 Roadglide Ultra.
Rom116
Reviewed in the United States on May 21, 2021
These work as expected, providing much more usable real estate on the floorboards of my '20 Road Glide. This is how the bike should come stock. I combined these extensions with an extended brake pedal for a great result -my entire boot actually fits and rests easily. Easy to install, there was only one way for it to go on. Bolting these on with the extended brake pedal, which required nearly removing the crash bar and working around behind the exhaust rather than removing it, the whole job only took about 45 minutes at a relaxed pace.The reason I'm giving the Kuryakyn floorboard extender kit 4 out of 5 stars because of the price. Outrageous. The setup for previous year models gave even more space and was half the price.Overall I am satisfied with the parts installed and would recommend them to anyone looking for more leg and foot room on the floorboards.
Deuce
Reviewed in Australia on April 9, 2021
Spacer kit fit perfectly and bolts had correct thread unlike no name kits
David N. Simms
Reviewed in the United States on September 12, 2020
I have been annoyed with the stock floorboard spread on my Harley Ultra Limited. Half of my foot was hanging off the side of the floorboards unless I cocked my feet at odd angles to get them on. Despite these only being 3/4" per side, they make a huge difference. The spacers are high quality, as are the included bolts. The only thing you reuse are the nuts for the front floorboard bolt.My bolts were not overly dirty or corroded, so they came out fairly easily. If you have lowers, make sure you get the floorboard seated so it is above the fairing when you start driving bolts or you can cause some damage. Add a little blue locktite as well. You probably don't want these to backout while you're on the highway!They seriously went on in about 10 minutes. Overly simple - 4 bolts with lock washers and four spacers that are easily identifiable where they go.
Customer
Reviewed in Canada on August 3, 2020
What i was looking for
Redz
Reviewed in Canada on July 22, 2018
Works great. Moved floor boards out an inch which is way more comfy now. No more hugging the gas tank with your legs on long trips. 09 street glide.
Melissa Z.
Reviewed in the United States on March 12, 2017
All I was looking for was to be able to have my heel on the floorboard and my toe on my highway pegs (just another position to move to). I could do it on the left, but not the right because of the peddle for the rear brake was in the way. I also like to rest my heel on the front edge of the floorboard when I'm in heavy/slow traffic...again, can do it on the left but not the right. Super easy to install, 20 minutes with an allen socket, 9/16 box wrench and lock tight. You'll need about a 6 inch extension to get the back bolt on the left side. You can try to do it with a regular allen wrench, but good luck...they factory bolts are super tight! You'll have 2 leftover bolts and note that the two big spacers are different sizes, the bigger one goes on the left rear. Comes with new lock washers, but you'll re-use the factory nuts for the front 2 bolts. If you've read all this you can now throw the included instructions straight in the trash. Price was good, shipping was quick, easy to install, solved my problem. What more can you ask for?
Robert Brady
Reviewed in the United States on November 8, 2016
Recently purchased a 2014 Street Glide Special which came with a Screamin Eagle Chisel Extreme Billet Air Cleaner kit. Love it, but my shin would slam into it while riding (side note, I'm just shy of 5' 9"). These spacers installed in about 30 minutes, and put my legs in the PERFECT spot.Pros:My shin no longer bruises from the air cleaner!MUCH more comfortable riding position, even for a shorter guy like me.Cons:The 3/4" difference puts my feet in the perfect spot to catch the wind at highway speeds, forcing them outward from the bike. This is causing a lot of leg fatigue as I'm having to fight the wind constantly. This is not a fault of this product, however, so no stars deducted. Looks like lower fairings and highway pegs are in my near future!Overall:This is definitely a MUST have mod for my SGS! Thanks, Kuryakyn
J. Cook
Reviewed in the United States on April 13, 2016
I installed on a 2011 Harley Ultra Classic Touring Bike. Wow, wish I had purchased earlier. Installed easily and allows for more room on the floor boards. I did purchased (separately) an extended rear brake pad/peddle by Kuryakyn, but its not needed. I have large feet/boots (size 13/14) and whether with the stock header pipes or aftermarket pipes, I was always hitting up against the header pipe and feeling cramped with my feet on the floor boards. This "kit" is a simple, well made, do-it-yourself, install that you will really like (I do)!!! All that is needed is one socket wrench with the appropriate driver to fit the bolt (same as stock) and I used some blue (medium) Locktite on the threads to ensure nothing vibrates loose since I don't see myself ever swapping out.
Recommended Products
$120.99
$ 47 .99 $47.99
$131.95
$ 54 .99 $54.99