Laboy glass ware are all made of high quality boroslicate glass and annealed at 800 degree Celsius , can be heated directly in an open flame and can withstand typical laboratory thermal variations in Chemistry processes like heating and cooling.

The ground joints are precisely grounded according to US standard.

3 Specifications

Laboy Soxhlet Extractor Body 34/45 Top Outer Joint 24/40 Bottom Inner Joint

Soxhlet extractor is a laboratory apparatus designed to extract substances with a low solubility in the extracting solvent.It designed with a Siphon to continuously extract the solid matter by pure solvent.The extraction thimble will be placed inside the extractor tube to contain the solid material which will be extracted repeatedly by the condensed extraction solvent.when the liquid level of the solvent under reflux in the extractor chamber exceeds the siphon tube,the solvent in the extraction chamber flows back to the flat bottom flask,and siphoning occurs.As the temperaure rises,the reflux starts again.

The soxhlet extractor is designed for the extraction of a lipid from a solid material. The extractor body is placed between the upper allihn condenser and lower boiling flask .The refluxing solvent repeatedly washes the solid extracting the desired compound into the flask.

With 34/45 Top Outer Joint 24/40 Bottom Inner Joint.

Laboy Soxhlet Extractor Body 45/50 Top Outer Joint 24/40 Bottom Inner Joint

Soxhlet extractor is a laboratory apparatus designed to extract substances with a low solubility in the extracting solvent.It designed with a Siphon to continuously extract the solid matter by pure solvent.The extraction thimble will be placed inside the extractor tube to contain the solid material which will be extracted repeatedly by the condensed extraction solvent.when the liquid level of the solvent under reflux in the extractor chamber exceeds the siphon tube,the solvent in the extraction chamber flows back to the flat bottom flask,and siphoning occurs.As the temperaure rises,the reflux starts again.

The soxhlet extractor is designed for the extraction of a lipid from a solid material. The extractor body is placed between the upper allihn condenser and lower boiling flask .The refluxing solvent repeatedly washes the solid extracting the desired compound into the flask.

With 45/50 Top Outer Joint 24/40 Bottom Inner Joint.

Laboy Soxhlet Extractor Body 55/50 Top Outer Joint 24/40 Bottom Inner Joint

Soxhlet extractor is a laboratory apparatus designed to extract substances with a low solubility in the extracting solvent.It designed with a Siphon to continuously extract the solid matter by pure solvent.The extraction thimble will be placed inside the extractor tube to contain the solid material which will be extracted repeatedly by the condensed extraction solvent.when the liquid level of the solvent under reflux in the extractor chamber exceeds the siphon tube,the solvent in the extraction chamber flows back to the flat bottom flask,and siphoning occurs.As the temperaure rises,the reflux starts again.

The soxhlet extractor is designed for the extraction of a lipid from a solid material. The extractor body is placed between the upper allihn condenser and lower boiling flask .The refluxing solvent repeatedly washes the solid extracting the desired compound into the flask.

With 55/50 Top Outer Joint 24/40 Bottom Inner Joint.

US Standard Size Joint Will Fit into European Standard Size Joint

Standard Taper Ground Glass Joints are interchangable.For either frosted, presicon-ground standard taper joints (same size),the inner ground surfaces (male joint) make a good seal with the outer(female joint)). The joint size is described by the form A/B. The first number A represents the outer diameter (OD) in millimeters (mm) at the widest point of the inner (male) joint and the second number B represents the length of the joint. For example, a 14/20 joint is 14 mm wide at the top (the widest part) and is 20 mm in longth. The joint has a standard taper 1:10, any two joints (male and female) with the same outside diameter (A)can fit into each other ,no matther how lenght the joints are. For example, a 24/40 (US standard size) joint on a condenser will fit into a 24/29 (European standard size)flask but the ground glass joint will protrude (40 - 29) 11mm into the flask.

Heavy Wall Design,Durable and Reusable

Laboy glass ware are all made of high quality boroslicate glass according to ASTM E438,heavy wall design,durable and reusable.

Protection of Products in Transit

Check the integrity of the product before packaging.
Bubble wrap tightly around the product.
Fill the space in the packing box with pearl cotton.

Material: Borosilicate Glass(PYREX Glass)

Silicon content	>80%
Strain and Temperature	520℃
Annealing temperature	800℃
Index of refraction	1.47
Transmittance	≧90％
Elastic modulus E	67KNmm-2
Tensile strength	40-120Nmm-2
Processing temperature(104dpas	1220℃

Coefficient thermal expansion	(20-300℃) (3.3±0.1)×10-6/K -1
Poisson's ratio μ	0.2
Density（20℃）	2.23g/cm3
Specific heat	0.9Jg-1K-1
Thermal conductivity	(20-100℃）1.2Wm-1K-1
Water resistance	1 Level
Acid resistance	1 Level
Alkali resistance	2 Level

Shopping Cart

Your cart is empty.

Laboy Glass Soxhlet Extractor Tube 55/50 Top Joint 24/40 Bottom with Siphon Tube Joint Apparatus Fat Extraction Body Organic Chemistry Essential Oil Extractor Lab Glassware

Product Description

3 Specifications

Laboy Soxhlet Extractor Body 34/45 Top Outer Joint 24/40 Bottom Inner Joint

Laboy Soxhlet Extractor Body 45/50 Top Outer Joint 24/40 Bottom Inner Joint

Laboy Soxhlet Extractor Body 55/50 Top Outer Joint 24/40 Bottom Inner Joint

US Standard Size Joint Will Fit into European Standard Size Joint

Heavy Wall Design,Durable and Reusable

Protection of Products in Transit

Material: Borosilicate Glass(PYREX Glass)