Your cart is empty.
Your cart is empty.Product Description
Special Design
The rounded and beveled design of the end of the exhaust pipe makes the product safer and more beautiful.
There is a small hole at the bottom of the exhaust pipe for drainage, which can prevent rust.
Installation steps diagram
Step 1:Preparation Work
Make sure your vehicles’ tailpipe surface clean.
Step 2:Installation Work
Slide the exhaust tip into the tailpipe. Appropriate lubricant may be used.
Step 3:Tighten the Bolts
If you think it's not tight enough, extra soldering will be a good safeguard.
Step 4:Finish the installation
Check if it is tightened to avoid loosening and falling off.
KC
Reviewed in the United States on February 15, 2025
Absolutely trash quality. Flimsy thin metal, claimed to be "stainless steel" however is more on par with your run of the mill chinesium. They are "corrosion resistant" and "polished" but one whole week after installing these on my truck, I have a fat layer of rust on them already that seems to be pretty deep in the metal as I've tried scraping and brushing it off to no avail. Aside feom that im pretty sure they have also discolored from the heat of the exhaust.I should have bit the bullet and bought the flowmasters like I thought too. Extremely displeased.
jason binggeli
Reviewed in the United States on February 10, 2025
Looks good for $25.Installed this on my 2021 Jeep Gladiator with the 2.5” exhaust. It was a very tight fit getting this exhaust tip attached to the factory exhaust.
Miss aligned !!! The camera covers DO NOT WORK!!!
Reviewed in the United States on June 12, 2024
It works as advertised. Not sure on the longevity of the paint being on it this upcoming winter will tell. It does add style and sound quality to your exhaust system.
ed abdoo
Reviewed in the United States on April 2, 2024
Good quality
Simen frahmand
Reviewed in Canada on August 1, 2023
Bought it for my taco. looked sick for first 2 weeks then started to peel . had to repaint it ..... So money worth it ? nope . Choose another brand.
Brynley Rees
Reviewed in Canada on June 3, 2023
Very happy with it. Had to chop a couple inches off stick exhaust but it looks good. Feels high end, good weight. Clamp included works very well, no need to weld. Would reccomend.
Neil
Reviewed in Canada on December 20, 2023
Bought 2 for dual exhaust. Like the look for my truck. Paint started chipping first year. Cleaned up and painted, then the second one started to chip. Thought would last little longer then that.
Boss
Reviewed in Canada on May 14, 2022
Nice looking tips, easy to install if you're willing to possibly use a grinder. I ordered 2 of them, they went on perfectly, 2.5", clamp is simple to tighten, don't overdue it, enough so it doesn't wiggle around and stays on.One of the tips has still primer showing through the top coat, looks like it has a coat of primer and a thin coat of black paint, so I will probably have to get a can of high heat black paint and sand them down with a wire wheel, no biggy. Still a good deal as they fit and look good.
Thomas
Reviewed in the United States on June 21, 2021
I like the look of this exhaust tip, bought 2 of them. The socket size is 14mm or 3/8 but you are gonna need a really thin socket and probably an extension because there isnt mych room between the chrome and the bolt head. My reccomendation would be bolt on and then weld the inlet to the pipe because I feel personally if its not tightened down as much as possible it will probably become loose and fall off over time. Great price for some cool exhaust tips though and shipped over the weekend, arrived 1 day earlier than expected.
Matt
Reviewed in the United States on April 8, 2021
I got straight pipes out on my truck and I bought 2 of these tips and got them put on at the exhaust shop nice sounds but the paint is peeling after about 1000 miles
TLeinweber
Reviewed in the United States on February 6, 2020
Bought this for my 18 F150. I had to cut a good 6” off of my stock tailpipe so it wouldn’t be visible inside of the new tip. A quick cut with a saws-all and some quick filing of the cut edges, no big deal. The matte black finish of the tip was good at first, but after a week or two of driving in rain / dirty roads it seemed to be kind of hazy. I personally wanted a gloss black but there aren’t many available on Amazon. So I just sanded and painted this tip gloss black and it looks great. The clamp holds it really tight on there. Pretty good bang for the buck. I would buy it again at this price.
Jennifer T. Helton
Reviewed in the United States on February 5, 2020
I had to remove the screw and use a rubber mallet with a bit of PB Blaster to get the tailpipe cover on. It's on so tight, that the screw is not needed. It looks really good and no flaking of the paint. 4 starts because it should have been a bit easier to install.
Glenn Thompson
Reviewed in Canada on December 30, 2020
Paint flaked off so fast
Recommended Products