Your cart is empty.
Your cart is empty.UTG Pro 30mm/2PCs High Profile P. O. I Dovetail Rings Features: - High Profile Precision Optics Interface (P. O. I) Scope Rings Have a 37mm Center Height to Fit 30mm Tube Optics with up to a 73mm Outer Objective Diameter - The innovative Precision Optics Interface (P. O. I) Addresses 3 of the Most Critical Areas in Scope Rings - a) Progressively Machined and Precise Inner Diameter to Achieve a Seamless Interface Between the Scope Ring and Tube b) Torn Screw Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Precisely Clenches Dovetail Rail for a Secure and Repeatable Zero Hold c) Removable Threaded Recoil Stop-pin Provides an Additional Interface Point with the Dovetail Rail for Added Security Against Bidirectional Recoil - Original Snag-free Contoured Profile with Reduced Weight and Size - 6061-T6 Aircraft Aluminum and Steel Construction with a Matte Black Finish Includes: - 2 Piece Ring Set - Each Equipped with 4 Top Torn Screws, Mounts onto Most Dovetail Rails Specifications: - Color/Finish: Matte Black - Material: Aluminum - Weight: 2. 7 oz. - Pieces: 2 - Rail Type: Dovetail - Profile Level: High - Ring Diameter: 30mm - Ring Width: 22 mm - Max. Scope Outer Dia. : 73 mm - Screws Per Ring: 4
Eduardo V. Crego
Reviewed in the United States on October 5, 2023
Cumplen bien con su propósito.
Br 1111
Reviewed in the United States on August 7, 2021
these rings are first class all the way. they are usa made .to use the full length of you 11 mm rail you may have to grind a little off the bottom corner of the rear ring to make clearance for the bolt handle coming rearward. The rear ring will have to be installed with the clamp part on the left side of the reciever because you shouldnt grind on the clamp itself to make clearance. you wont be able to run the recoil screw into the rear dimple on the rear of a cz 457 but the front ring recoil screw will go into the front dimple and that is enough. these rings clamp so well on the dovetail they will hold if you didnt use the recoil screws. these rings are absolutly first class all the way. take note only the rings with pro made in usa are made here. i just cant say enough about these rings they are top quality and they are well thought out by the manufacturer. you will be impressed by these rings! a+++ all the way
Rono518
Reviewed in the United States on January 4, 2021
You get what you pay for
Kindle Customer.
Reviewed in the United States on May 16, 2020
The last pair of these same rings I bought were marked and stamped "Made In USA", ON THE RINGS. These have no such markings, only on the box they came in; that's not enough. They're going back.
Alexander
Reviewed in the United States on May 1, 2020
Works well. Holds zero on my 7mm mag.
Casler.Inc
Reviewed in the United States on February 1, 2020
The scope mounts are so well manufactured I did not have to lap them at all for a perfect alignment. Hassle and headache free installment and they’re manufactured in my home state
just for fun
Reviewed in the United States on December 1, 2020
These seemed like a good idea. I thought the price was good. These should be 10 bucks or less. They had a serious ridge inside each half that scratched my scope. I had to sand down the ridges to use. This and the alignment was off, one of the rings really pulled to one side. I wouldn't buy these again, and it really makes me question UTG's quality.
terry
Reviewed in the United States on December 21, 2019
Sturdy and easy to install Vortex scope on a CZ rifle which required special scope rings to fit there dovetail.
Recommended Products
$89.00
$ 42 .99 $42.99