Your cart is empty.
Your cart is empty.
Product description
specification
Color:yellow + green
Voltage: 5V; Button Interface Size:2.8mm (110")
Mounting hole required: 24mm
Overall diameter of button across plunger: 27mm
switch type:build-in microswitch
This is a LED Arcade Game DIY Parts for 2 Player DIY Project.
The encoder support all the windows systems!
Each Encoder have its own USB Cable to make sure that Multiplayer can play the games in the same condition!
The Joystick is a 8 way professional joystick!
The buttons are 5V LED Illuminated push buttons with build-in Microswitches inside.
The button default designed as when you push the button it will lighted.
If you need the buttons lighted all the times,Just contact us.We will help you set it as lighted all the time.
If you purchase one of this item,What will included in the package?
2x Zero Delay LED USB Encoder
2x USB Cable
2x 5Pin wires for Joystick
20x 3Pin wires for LED Push Buttons
2x Yellow 24mm Ring-Fixing LED Push Buttons as start buttons
2x Green 24mm Ring-Fixing LED Push Buttons as start buttons
8x Yellow 30mm Ring-Fixing LED Push Buttons as fight buttons
8x Green 30mm Ring-Fixing LED Push Buttons as fight buttons
1x Yellow 5Pin 8 way joystick
1x Green 5Pin 8 way joystick
1x Install Description
Jan Gnapp
Reviewed in the United Kingdom on August 2, 2021
Very easy to install and set up and worked perfectly first time with my Raspberry Pi 4 running RetroPie and Emulation Station. Joysticks have a nice positive and clicky micro-switched action and the buttons are responsive and brightly illuminated. Considering everything that is included this is a very good value complete 2 player set. Something to bear in mind is that for each player, 8 buttons are you typical "full size" arcade types but buttons 9 and 10 (usually for coin/select and start) are of a small diameter which you can see in pictures... consider this when cutting holes for the buttons. Of course if your cab/controller is a 6 button one then you can use the leftover 7th and 8th full size buttons for your select and start instead. Will definitely purchase these sets again if making further cabs/controllers.
Link
Reviewed in Canada on February 12, 2020
I have ordered many of these Easyget joystick and button kits from Amy-Happy-Mall, and they are usually great. However, the last one I ordered has faulty Zero Delay USB Encoders. They both worked okay for a few minutes then completely cut out and would no longer function. I have tried them on 2 raspberry pi's and on a Windows 10 PC, and they do the same thing. It's too bad I got a bad kit, because I normally love these things. I will be unhooking everything, packing it up, and sending it back for a return.
Make It Stop
Reviewed in the United States on April 21, 2020
If you need an all included 2 player LED setup these work just fine, I've had no issues there. My only complaint is that I ordered the red/blue pack and it suggested if I want 4 players to add this green/yellow pack. Both item descriptions showed the same connectors for the buttons, but when they arrived this green/yellow pack had different connectors. The red/blue buttons had 4 connectors that you wired individually, and these just had one connection to wire, and different USB encoders to support them. This wouldn't be an issue by itself, but I bought 'Start' and 'Coin' buttons for each players controls and they needed the same wiring as the red/blue set. I'm a dummy when it comes to wiring so it took me far longer than it should have to figure out a work around.Otherwise though this product is solid.
Me
Reviewed in Canada on September 8, 2019
Great
Buffalo
Reviewed in the United States on January 26, 2019
I bought these three years ago and installed them a year and a half ago along with the red and blue versions. The buttons look great when they light up. I found instructions online (for other joystick buttons) and everything goes together fairly easily once you know what lead goes where. My only issue is that the joystick screws come loose constantly. Not sure how to tighten them down permanently. I don't want to glue them as I plan to eventually switchout the board. With the joystick problem these get a two-star review. If the joysticks didn't come loose it would be 4 starts.
hender
Reviewed in Canada on June 7, 2018
Good quality, fast shipping. They work perfectly. I've had no problem with these ones. I recommend them for your arcade proyect.
Customer
Reviewed in Canada on August 9, 2017
Great, product. Used it with my Raspberry Pi 3 and it works with Retropi,Good times, easy to install
M. O'Boyle
Reviewed in the United States on June 2, 2017
The instructions are bad, as in they do not exit. But it does include a picture of a properly wired button. I used that to wire all the buttons. There are also no screws included to mount the joysticks. One issue, I connected one joystick to the power bank on one of the boards. Silly mistake. Once I plugged it into the right spot, it all worked great. I built a pallet bar in the garage and drilled holes in it for the buttons. RetroPie games in the garage now!! Perfect.
Jennifer Ramirez
Reviewed in the United States on December 8, 2017
work and feel great - instructions could be better but the pictures made it a breeze to setup
Accel
Reviewed in the United States on June 9, 2016
Perfect, it works out of the box without flaws in retropie.
Joseph Houff
Reviewed in the United States on December 23, 2016
These work wonderfully with a Raspberry Pi 3 running Retropi! Also note that if you have a flickering problem that means your AC adapter amps are too low. I bought a 2.4 amp and all flickering went away! Awesome!
William N.
Reviewed in the United States on November 23, 2016
These were very easy to set up and I love the buttons, but the sticks are worse / different than the red and blue ones I ordered. They're a little loose feeling because the stick can wiggle before it comes into contact with the switches. Also the round plastic piece that goes around the bottom of the shaft is a bit cheaper looking than the red/blue set. I'd recommend buying those instead!
Calvin Ray Clark
Reviewed in the United States on October 11, 2016
All items was good as promised
Recommended Products
$18.29
$ 7 .99 $7.99