Your cart is empty.
Your cart is empty.Product Description
Light Bar Mounting Bracket
Without Drilling Install
With 3 firmly screws for secure installation
Designed for easier and faster work done.
Without drilling installation,fix the clamp to done.
For led light bars,work lights mounts on car hood.
180° Up and Down Adjustable
The bracket holder is 180° vertically adjustable for the perfect lighting angle of the light.
60°Left and Right Adjustable
The holder is also 60° horizontally adjustable for the exact light direction you want.
Max Clamp Board Thickness
The max limit of the clamp board thickness on vehicle is: 8mm.
Sturdy 304 stainless steel
Use sturdy 304 stainless steel, anti-corrosion and anti-rust even in bad weather.
hodorii
Reviewed in the United States on September 21, 2024
If you can't or don't want custom brackets, then these are a pretty good solution. These are simple to install, but not the friendliest. Cable management, I feel it's a little flimsy, but it will get the job done. I would highly suggest using some thread-locker if/when installing these. Plan ahead. Bracket quality seems pretty solid, I appreciate the rubber "boot: to help add grip and prevent scratching/damage.
Doc
Reviewed in the United States on August 25, 2024
Aside from the title all I can add is 1) they look good. I hope and pray they endure in the salt air environment where I live (will update if they don’t) 2) it’s easier (much easier) to aim the lights which is why the old brackets are being replaced.Recommend 👍🏽 Helpful?👇🏽
Nick Mathews
Reviewed in the United States on August 19, 2024
I was stoked to find a product I could use that did not require drilling holes in a perfectly good bumper or hood. I will start by saying that these worked fabulously once I installed the 2-3inch square LED lights on them. Going off road and driving like a mad man and they have not slipped or come loose.With that said, I started off using large rectangular LED off road lights and they proved to be too heavy for the mount(s). The mounts themselves would not come off, they were solid on that front. It was that the lights would not stay in place when off roading or even going down a particular bumpy road. They would end up sagging and I would have to keep getting out of the vehicle to readjust them.What I found out was the little retaining nut had lost the plastic/wax thing that keeps it from coming loose. I cannot say if this was a defect of the product or the environment it was subjected to, but the fix was replacing that nut with another one that still had the locking seal and also using red thread locker on it.
A.
Reviewed in the United States on July 31, 2024
I like that these don't require drilling or cutting. However, the clamp is a little clunky and the mounting plate easily falls out during install. It has 4 individual screws to tighten down the clamp, which to me feel like they would easily loosen or strip if over tightened. Would be nicer if they just used two larger screws instead. The pivot and tilt is nice and allows for precise adjustment of your light.
Black Iron
Reviewed in the United States on July 18, 2024
Works as designed, but the allen set screws that clamp it to the panel can and will leave marks. The chrome stands out, so stay away if you are wanting a dark color. Arrived assembled, with an allen key to adjust the mount. Easy to install and holds well without any movement, as long as everything is tight.
Tammy Wilson
Reviewed in the United States on June 26, 2024
Theses are nice and simple to install. I used them to install some ditch lights on my Ford Maverick pickup - but should work on any vehicle. One thing to be careful of... each mount has a small long plate that the small screws should push up (see the image on my review). Check carefully before installing, as this piece had fallen off on one of mine without me noticing, which resulted in me attaching it to the truck and leaving small holes in the painted surface of the bottom of my hood (luckily its on the bottom side of the hood where nobody will see it). The mount itself wasn't broken or anything, but that plate can easily fall out. It was easy to put the plate back on, but be careful to make sure it is in place before installing.Otherwise, I think these are good. The only things that I think would improve it would be if there was rubber/silicone padding on all of the "inside" parts of the clamp, and I would have preferred the entire mount to be black rather than any chrome/silver. Overall its a good value - just be careful during install.
T. A. Lovern
Reviewed in the United States on June 22, 2024
I like this style of light mount - no drilling, no disassembling hood mounts.All the hardware and tools required to install these mounts are included.
Recommended Products