Your cart is empty.
Your cart is empty.Product Description
LED Taillight integrated Turn Signal Function
Fitment:
- Compatible for HONDA
- VTX1300S, VTX 1300R, VTX1300T;
- VTX1800R, VTX 1800S, VXT1800T
- OEM ref: 33702-MCV-671; 33701-MCV-672
Condition: 100% Brand New
Color: Smoke color
Feature: Maxium LED installed.
80 Red Leds for running/ brake light
64 Amber Leds for turn signals
!!This product Doesn't fit for VTX1800F;VTX1800N;VTX 1300C; VTX1800C!!!
Please check your model information before order.
Flash Reference:
Installation
- For the running and brake light functions, It is usually a plug and play process. If our light comes with a 1157 bulb socket, It can be used as a replacement for the existing bulb. Alternately, if the socket does not fit your bike, you can replace it with your bike’s factory connector.
- The wiring color reference are as follows: Black wire: Negative（Ground）
- Red wire: Running light
- Green wire: Brake light
- If the light does not illuminate after connecting the wires ,please ensure that the wiring and connectors are securely connected. Try disconnecting and reconnecting them, If the light still does not work, We recommend testing it by connecting it directly to a 12V battery using the above wire colors.
2. Turn Signals Activation: Connect the yellow wire(or yellow & black wire) of the tail light to the positive wires of your bike's turn signals. This will activate the built-in turn signals of the tail light. if additional black wires are available, they should always be connected to the ground wire.
3. (Optional) Dealing with Error Codes or Alert: If your stock lamp is an incandescent bulb and you are switching to an LED taillight, you may encounter error codes or alerts, such as blinkers flashing rapidly or amber lights remaining still, this is usually caused by the low current of LED light. To resolve this, we need to increase the current by add the provided resistors into the circuit in parallel connection with the taillight, following the provided diagram. Alternatively, you can replace the stock relay with an LED relay.
jason n
Reviewed in the United States on August 16, 2023
I am sure this is an excellent product. I bought the wrong one for my bike, entirely my fault. In retrospect I replaced it with the correct one from the same company and it works perfectly!
Brian O Yockey
Reviewed in the United States on October 1, 2022
Looks good and do work though had to modify to get it to fit
Joseph
Reviewed in the United States on August 20, 2019
I put it on my 02 vtx 1800C and it works. The turn signal wires were backwards but it was an easy fix. I had to do some modification to the mounts to get it to sit and even then the top of the light sits 1/4 inch off the wheel well, so the seal doesn't sit tight. But the LEDs are bright and work the way they should, it looks better than the stock turn signals.
M00SE
Reviewed in the United States on May 1, 2019
Looks good. Leans is very ridged and sturdy. Lights work great.
john griego
Reviewed in the United States on December 2, 2019
easy install, look and work great!
Recommended Products