Your cart is empty.
Your cart is empty.Product Description
6AN ID OD Size
6AN length 10ft or 20ft
Internal diameter：0.31“ （5/16”）
Outer diameter：0.465“
Tolerance of Internal diameter ± 0.2mm
Tolerance of Outer diameter ± 04mm
8AN ID OD Size
8AN length 10ft or 20ft
Internal diameter：0.39“ （13/32”）
Outer diameter：0.543“
Tolerance of Internal diameter ± 0.2mm
Tolerance of Outer diameter ± 04mm
10AN ID OD Size
10AN length 10ft or 20ft
Internal diameter：0.51“ （1/2”）
Outer diameter：0.68“
Tolerance of Internal diameter ± 0.2mm
Tolerance of Outer diameter ± 04mm
Applicable Medium
Ideal for the transportation of ethanol, uels, petroleum, diesel, and bio-diesel, ect.
E85
E15
Antifreeze
lubricants
Structural diagram
Stainless Steel Braided Improve the strength
Nylon Braided Prevent corrosion and wear
PTFE Hose Chemical resistance, compatible with most fuels Non-conductive to ensure safety.
Application of PTFE hose
Commonly used in:
fuel delivery system;
fuel injection systems;
turbocharger and supercharger systems;
performance and racing applications;ect.
Thomas N.
Reviewed in the United States on September 3, 2024
Decent AN line, nothing different from what I've gotten in the past from other Amazon listings. The selection of fittings could be better, but at least you get some.
Kairi
Reviewed in the United States on August 14, 2024
A good starter kit. You will needa few other fittings to complete yourbuild if starting from scratch.
HollywoodSC
Reviewed in the United States on July 6, 2024
I typically opt for PTFE fuel line because it's what I'm used to assembling, and its in a way the end all be all of fuel line. Unless you run out of capacity (need to upsize) it typically doesn't need to be messed with again. Whereas other line that's not PTFE will deteriorate/fail over time with high ethanol/methanol content.Anyway, I'm surprised at this line. It's about as nice as most name brands you'd buy from a performance shop. I don't have any issues with it, and am using it on some LS swaps for fuel, trans/steering and other stuff.Overall pleasantly surprised with the quality. The completeness of the larger kit with 12 pieces + 20ft is about the right combination to get any one specific job done (hydroboost, fuel system, or steering lines)
Jason
Reviewed in the United States on July 6, 2024
This fuel/fluid hose set was made really well. I am very impressed with the anodized fittings. The treads are smooth and go together effortlessly. The flared side of the fittings also have a nice finish and do not leak when properly tightened. The hose itself has a nice even thickness and a solid braid around the outside. Just be cautious with the loose steel braid ends because it is very sharp. Excellent value for hosing up ATF coolers or fuel lines.
Charlie Lima
Reviewed in the United States on July 15, 2024
I used this kit to update the fuel lines in my carburetor setup. The hose is thick and the weaving looks good. I only installed half of the fittings, but all seem to be fine with no leaks. This kit provides more than enough parts for your normal engine, to improve the fuel hoses under the hood.
TheLastAndTheCurious
Reviewed in the United States on June 21, 2024
I have steel adpaters that go from the power steering rack to AN6, and I've seen people use these aluminum hose ends (albeit name brand ones usually) along with PTFE line, as long as the line also has a good steel braid inside, which this one does. Also, the length of the lines doesn't seem to matter based on other people's drift car builds, sometimes they run an Opel Astra all-in-one electric power steering pump in the trunk, with the lines running all the way up front.Fuel Use:This kit looks great, of course it would be fine for any fuel system under 1000hp, probably more. Plan on getting a couple more fittings if you need to put in an inline fuel pump and inline fuel filter. If you're running an in tank fuel filter this kit will have everything you need. Less fittings being used = less chances for leaks.
Mr68K
Reviewed in the United States on June 18, 2024
Reviewed: LokoCar 8AN PTFE Fuel Line Kit AN8 E85 Nylon Braided Fuel Line Hose Fitting Kit 20FT BlackExcellent quality double braided (first stainless then nylon) PTFE fuel line with fittings. It just works awesome and wont dissolve when you leave corn gas in there all winter. I am in love!I cannot remove any stars, the product works well and the fit and finish is excellent. The price is also the lowest online. A+
MrMakesALotOfStuff
Reviewed in the United States on December 1, 2024
Worked well t replace and dress up my fuel lines.
Recommended Products