PapaBone
Reviewed in the United States on May 8, 2025
Looked to be of good quality, but I returned them in the end as the size was wrong for my application.
Gerry H.
Reviewed in the United States on May 8, 2025
just what I needed. Got here quickly
DAMON
Reviewed in the United States on May 21, 2025
Great product
madkiwi
Reviewed in the United States on May 21, 2025
Nice and affordable little inline filters. Purchased for my Craftsman mower, cheap insurance to prevent gunk getting into the carb. If you are like me then you are adding fuel out on the lawn, the gas cap is crusty with dried grass etc. You know some goes in the fuel!Install is easy enough if you never had a fuel filter before. Just cut the fuel line in a convenient spot and cut 2 inches or so out, slip the clamp on either end then insert the end fitting as far as you can. If you have 5/16" line then make sure the hose goes over the thicker part of the end fitting. There's no barbs on the fitting but for my application it isn't going to be a problem as the fuel line is not pressurized. Then position the clamps to make sure it is secure.See through housing means easy to see if there is a lot of junk and maybe you need to replace it sooner. Otherwise replace as often as you change your oil (25 hours or every season). Cheap insurance.
1SamIam
Reviewed in the United States on May 19, 2025
This Two Pack of Fuel Filters includes the Four hose clamps that are needed for convenience.These work perfectly well for most small engines and are critical to change out periodically for top engine performance.Easy to install in a few minutes of time.Excellent Quality and Value!
Waste of money.
Reviewed in the United States on March 2, 2025
Easy installation and they last for months.
Ed S
Reviewed in the United States on November 15, 2024
I ordered this fuel filter to use on my Coleman generator with a 10HP Briggs and Stratton motor. It was easy to install, I just removed the old one and put this one in its place. It works as expected.This filter has a little magnet inside to capture any ferrous metal that may have flaked off the tank. I'm not sure how useful that is in my situation since my generator's fuel tank is plastic, but I guess it's nice to have anyway.The one problem I found is that it's not marked to show the direction the fuel flows, but It's in the item description online, and most people already know the direction to install it.
Phil Mundy
Reviewed in the United States on October 30, 2024
Worked like oem