Your cart is empty.
Your cart is empty.1. Long life, up to ten thousand times of switching; self-contained installation card holder, providing bottom/side two installation methods; 2. The horizontal plane ≥2.17inch is automatically turned on; ≤0.98inch is automatically turned off; and the thickness of the cushion material under the installation base can be increased/decreased to suit Positioning requirements for different liquid level heights; 3. Use high-quality copper cable connection with a diameter of 0.14inch (the internal copper wire diameter is up to 0.079inch) to ensure that even a large current of up to 30A can flow It can also work normally; 4.Using ultrasonic welding, sealing and forming at one time, reliable and safe, and will not leak; 5. The shell is made of high-quality ABS material, and the internal metal contacts ensure reliable start/stop; 6. With the water pump, an automatic shutdown/start system can be formed to prevent the water pump from idling, dry-running, burning or causing failure; it can realize automatic On duty, no labor and time-consuming guarding.
RED Dirt Road Homestead
Reviewed in the United States on June 3, 2019
I used this to turn on a sump pump which was a ways back by the pond. Works like a charm, I don't have to worry about burning up my pump by running it dry.
Craig B
Reviewed in the United States on May 11, 2019
Sump pump switches are critical to keep the boat from sinking. Once the water level is reduced enough, the float arm should drop back down to the "off" position to keep the pump from running continuously. But BOTH of the last two switches I bought got stuck in the upper "on" position. I burned out one of the pumps because of this. This switch is too critical, so spend the $40 - $50 to get a better one!
S. Landburg
Reviewed in the United States on April 2, 2019
Falled after three cycles. What more can I say.
Recommended Products
