Your cart is empty.
Your cart is empty.Matek Systems PDB XT60 W/ BEC 5V & 12V 2oz Copper For Helicopter FPV Quadcopter Muliticopter Drone Power Distribution pdb power distribution boardFeatures:brand new and The PDB-XT60 has been engineered to provide the highest possible performance and reliability in a 36x50mm & 4 layers PCB.It distributes power from a pack to 6 ESCs, as well as providing synchronised & regulated 5V outputs & linear regulated 12V for powering Cameras, Servos, receiver, Flight Controllers, Video Transmitters, LEDs, It offers a XT60 socket to connect the pack conveniently.2oz copper, 4-layers &1.6mm PCB.Built-in XT60 Socket.Total 6 pairs solder tabs are fit for H X type frame.5V & 12V Output LED indicators & Short circuit tolerant.Specifications:Input voltage range (3S-4S : 9 18V Regulated 5V and 12V outputs- LED power indicators ( 5V & 12V outputs 6 outputs & 1 pair VCC/GND padsoutputs:- Continuous current: 25Ax4 15Ax6- current (10 seconds/minute): 30Ax4 20Ax6BEC 5V output:- Designed for Receivers, Flight controllers, OSD, and Servos.- synchronous regulator.- Voltage: 5.0 +/- 0.1VDC- Continuous current: 2 Amps (Max.2.5A 10s/minute)- Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)- Short-circuit tolerant (5 seconds/minute) BEC 12V output:- Designed for Video FPV camera with linear regulator.- The should be 4S (1318V Voltage: 12.0 +/- 0.3VDC- Continuous current: 500mA (Max.0.8A 5s/minute)- Short-circuit tolerant (2 seconds/minute)BEC 12V @ 3S Output voltage= 3S voltage -1VPhysical:- Dimensions: 36 x 50 x 4 mm (without XT60)- Mounting: 30.5 x 30.5mm, Φ3mm- Weight: 7.5g(w/o XT60), 11g(w/ XT60)Package Includes:1Set Dis
