Your cart is empty.
Your cart is empty.Meepo Electronic Skateboards Replaceable PU Sleeves
Alex Guzman
Reviewed in the United States on June 24, 2023
I honestly didn’t think when I was replacing parts on my board that I would feel as much of a difference as I did with new sleeves
Brandt Kock
Reviewed in the United States on March 15, 2023
They roll over things much better than the 90 mm wheels but I bought a donut set up and I love those wheels just wish they were interchangeable but just want my board to work again to much money for it to not be working
Marc
Reviewed in the United States on January 26, 2022
Update 1/27/22:So I decided to try them out. When I tried the screw fitment prior to mounting the wheels to the board, I noticed a thin rubber coat around the screw holes. All but one was the perfect shape of the hole. The last hole was partially covered by a rubber coating, making the hole appear smaller, and also provided enough of a barrier that I couldn't thread the screw in by hand.Fast-forward to today. I mounted wheels with all the screws tightly in place, then decided to try out the remaining hole for good measure. Low and behold, once the wheel was secure on the motor, I threaded the last screw without any problems.Now, there's still the issue of the chipped magnet in the other wheel. I took it out for a test ride and so far it doesn't seem to be an issue. Based on some other reviews, they may not last long enough to become an issue, so time will tell.With all that said, I changed my rating from 1 star to 3 stars. I'm pretty satisfied for now.FYI: The board I installed them on is the Meepo Mini V2. Upgraded from the stock 90mm to 100mm wheels.================================================================================Old review:I noticed the negative reviews and chose to ignore them hoping that it wouldn't happen to me. It has worked before, but not this time. As you can see in the pictures, there's a chipped magnet on one wheel and a tap that is way too small to fit the screw on the other. These cannot go on my board, but they can go back for a refund!If the seller is reading this, I will accept a suitable (quality tested) replacement, otherwise I'll need my money back.
Seth
Reviewed in the United States on August 5, 2021
when I received it I took all my old wheels off and installed this one only to find out on the last screw they forgot to tap the threads so I had to take it off again. if you look at it, it looks like they all have a holes but one of them is just the pilot hole and it doesn’t actually have the threads. Meepo has horrible QC
Reem101
Reviewed in the United States on March 20, 2021
Improved ride quality. Feet no longer hurt after 20min
Robert Munoz
Reviewed in the United States on February 7, 2021
I like there size difference on the mini2
Flora Puro
Reviewed in the United States on January 19, 2021
This is a part from Meepo directly and fit my brand new Meepo V3. This is a must have replacement for the 90mm sleeves and wheels. I got a much better, smoother ride from these sleeves than on the 90mm. Frankly, Meepo should ship their boards with 100mm from now on simply because of the smoothness of the ride.One note on sleeve removal: you must unscrew the hex bolts from the back of the wheels in order to pull the magnetic sleeve from the rest of the motor. DO NOT USE THE HEX TOOL THAT COMES WITH THE MEEPO KIT. You will get a much better experience if you use a RATCHET fitted with the proper size of the hex screw (1/8"). I tried using the hex tool from the Meepo kit. The metal used on that tool was much too soft for two of the bolts and so I STRIPPED THEM!!! This was such a tremendous pain in arse. I ended up using a dremel tool to etch new notches in the stuck bolts and used a tiny screwdriver on a ratchet to slowly remove it. I would've avoided all that hassle if I had just used a ratchet with the proper size hex. So...if you purchase these 100mm wheels, USE A RATCHET with a 1/8" hex head to remove the screws on the hub motors. You won't strip screws and you can get the job done quickly.
NELSON
Reviewed in the United States on December 12, 2020
The 100 mm wheels are the best, You get to avoid the annoying little cracks and It feels so much smoother than before, the only problem is the screws. They tend to get stripped once you put force on them, so you have to be extra careful when tightening them. Besides that it is perfect.
Recommended Products
