Your cart is empty.
Your cart is empty.Product Description
2 Doors Access Control System with Metal 5A 110V-240V Power Supply Box and Two door TCP/IP Network Access Control Panel Wiegand Controller,remote open
What the system can do:
- Basic funtion: swipe card/key fob open door, can check/download/export the detail history entrance record.
- Easily add/delete/activate/disable the user open privilege by professional management software.
- Support phone app to open door locally or remotely.
- Can be used for high security area, the control board as master unit is put inside room.
- Allow access for certain door at certain time for different users.
- Can keep door auto open during business hour and then auto close at set time.Support holiday security control.
- Can swipe certain times to keep open and swipe certain times to close door.
- Can be used for user attendance check also.
- A lot other features such as anti-pass back, 1st card open, multi-card open .etc.
- ......
Power Supply Box:
- Power：60W, Rated Current：5A
- Input Voltage：110V-240V, can be used all over the world.
- Output: DC12V to power on the whole System(11－14V can be fine-tuned).
- Color of the box：black
- Size of the box：10.98*9.21*2.64(inch)/279 * 234 * 67(mm), Weight: 5.51lbs/2.5Kg
- Unlock Adjustable Delay: 0-15s
- External Remote Templates :Yes
- Charging Overload :Yes
- Also act as the cabinet for the control board.
- With power cable to insert to electric outlet box.
2 Doors Network Access Control Panel:
- Control 2 doors,get in by swipe card/key fob, input PIN code or use card + PIN, and get out door by exit button or motion sensor.
- Door controlled : 2
- Support 2-4 readers.
- Control of user capacity up to 20,000 user / up to 100,000 history records.
- Network communication via TCP/IP.
- Application software support Win7/Win8/Win10/Win11 both 32 & 64 bit ALL Windows system, not support MAC.
- Support phone app to open door even you are not there.
Sofeware Diagram:
Robert Cameron Gardner
Reviewed in the United States on March 18, 2025
I configured my own system with all of their parts using the magnet style lock, battery backup and scanner. I had a tricky install being that my door was metal and my frame was wood. I had a few questions during the install and I'm happy to say they answered them within about 8 hours (I'm assuming the delay was just the time difference). Once the lock was all installed and I loaded up the software it all worked flawlessly on the first try. I'm very happy with this system and their support. I'm planning on using this setup again in about 6 months in another gym. Thank you
Doctor AR Zaidi
Reviewed in the United States on October 29, 2024
Excellent product. Combined it with ring doorbell module that allows gate control through ring app and has setting that permits Amazon delivery to open themselves.The controller was easy to assemble. I had some questions setting up codes and connecting wiring to the ring controller. The tech support was amazing. Far better then any other product. Different time zone but responded to emails and used WhatsApp to help resolve any issues. The system works amazingly. Combined it with access key pad, ring doorbell and ring computer module.
American Monster
Reviewed in the United States on October 23, 2024
I installed into an "old house" now used as an office building about 3 months ago and so far, it's solid. For entry, the user swipes their fob and the controller grants access by applying 12vdc to release the door latch. The user simply pushes the door to open.Overall, I would rate the project as "very challenging" due to the old house environment. Installing into a commercial building with mag locks would probably be a lot easier.The controller itself was easy to install and setup. The instructions were clear enough for me. I'm not using all the fancy access control features like time-based lock/unlock and reporting, etc. so I can't speak to those. However, running the low voltage wire from the controller to the doors and replacing the old latches with electronic latches was challenging, especially the electronic latch installation. Note, if you have deadbolts on your doors, they can't be used any longer if you want your users to be able to gain access around the clock...…therefore, your doors could likely be easily breached since the latch is the only thing securing the door. Since we need to have 7/24 access, we decided to lock the deadbolts on all but one door after normal business hours.I have 3 doors connected with RFID fob readers. I changed out the doorknobs for ones that are "storage room" types...from outside, they're always locked, from the inside they are always open. ( Schlage F80-PLY F-Series Plymouth Storeroom Door Knob) I installed electronic latches (Seco-Larm SD-991A-D1Q). Also, for security concerns, I installed the controller setup software onto a cheap standalone Windows minicomputer. Overall, I think I spent about $800-$900 on parts and materials. If there are any failures, I’ll try and post an update here. Good luck!
IT Manager for an Amazing and now Secure company!
Reviewed in the United States on January 15, 2024
These are pretty amazing controllers and door access systems. We investigated many and found that every other supplier would not direct sell us the controllers, and wanted to charge a massive installation price and $1200 or more for just the control board. We were able to use these amazing controllers with various door access systems to secure almost 40 doors, install and configure them ourselves, with just a fraction of the cost, around 10% what we would have paid.Reaching out to their support, I have always received responses within 24 hours and have received the instructions I needed.Great product and support, I hope this supplier capture the door access industry which will bring the insane costs of big manufacturers demand into something reasonable!
Princeton Pauper
Reviewed in the United States on April 19, 2024
This is a very impressive DIY solution for building access control. I don't have a lot of experience with this application per se, but the hardware and software provided by MENGXI-CONTROL is very impressive. Given the relatively low price I was a little skeptical but decided to give it a shot. I ordered the 4-door control panel kit plus some extra MAG locks, push-to-exit door buttons, keypads and the motion sensor. Hardware build quality looks very robust and so far I've not encountered any issues or surprises. The hardware comes with extensive documentation which is also available online and is supplemented with many videos showing how to tie everything together. I'm really impressed most with the features offered by the software package. Before trying to install at a new property, set up a simple table top system with the panel, lock, and keypad. This makes it easy to play with the software and learn all the features. Once I got the hang of it, it was very easy to implement more complex features like time of day access control, department or tenant specific rules, etc...To top it off, customer support is really responsive and very clear with instructions.
Recommended Products
$242.02
$ 99 .00 $99.00