Your cart is empty.
Your cart is empty. An ergonomic detecting harness that allows for weightless metal detecting in superior comfort
Suitable for people of different heights.
Belt width: approximately 2″
Belt loop width: approximately 3″
technology employs three biomechanical strategies to transfer the
detector mass
(weight) away from the operator's arm:
remove flexion and extension muscle strain,
use solid skeletal structure to support loads,
avoid soft tissue anchor points.
These effectively remove the need for the arm's muscles to tense in
a flexion
extension position while swinging the detector, and therefore prevent
the muscle fatigue and soreness that is commonly experienced with metal detecting.
technology also allows the arm to freely medially rotate and abduct to swing the
detector without the need to hold it up off the ground.
Most traditional bungy and harness systems are only effective at removing the load
from the upper arm and forearm, leaving the shoulder to bear the weight of the
detector. Other systems attempt to rectify this by using a strut to transfer the
weight from the shoulder to the front of the hip in a concentrated point. However, this is a soft tissue area and incapable of supporting a load without
discomfort. Additionally, since this area of the body is soft, the strut sinks into the
hip and pulls down on the shoulder, thus becomes ineffective at releasing the
strain in the shoulder.
Spank Mastrr
Reviewed in the United States on February 5, 2025
All in the title
Team Matthias
Reviewed in the United States on May 8, 2024
I don’t detect very often, more prospecting with drywash and panning. However, I won the Gold Monster 1000 Grand Prize at our club’s award party and so now I participate in quite a few detecting events. Even though that detector is quite light, it gets heavy for me so I picked up this harness and I can tell you first of all that it is light, comfy and definitely works as intended! Without fail, I use this harness, but will recommend you take the time to fit it and adjust it fully when you receive it, you won’t regret it. The padding is wonderful, no part of this rig cuts into me, at all. Enjoy!
Michael
Reviewed in the United States on May 15, 2024
Very nice rig for my metal dwetector
paul cunningham
Reviewed in the United States on November 19, 2024
The Quality is good, would be fine for a child but defensively not for adults!
PapaStove
Reviewed in Canada on May 13, 2023
I was Excited to give this product a try, however i was surprised at the flimsy material it was constructed with. My first thoughts were this feels cheap and very flimsy. Metal detecting gear has to be solid, we demand a lot from it the belt portion i clipped a finds pouch to it and within one session of detecting the side had literally pulled a way from the belt with the poor stitching. STAY AWAY FROM THIS PRODUCT you will be disappointed if you use it for actual metal detecting. Gonna go back and use my pro-swing from minelab.
Pam Smith
Reviewed in the United States on January 16, 2023
I am a small person and am not strong but love to swing a metal detector. I couldn’t do it for long because I grew tired from a sore shoulder quickly. I saw this product and thought I’d give it a try.Upon receiving it I was a bit disappointed that it came unassembled but thought “what the heck, I’ll put it together.” Yeah, not so easy with no instructions. I tried on my own to figure it out but it was too complicated. Ended up looking at the other assembly complaints under the comments section nearly giving up until I came across a very nice person ( thank you very much)who took the time to give step by step instructions on how to assemble it. I’m telling you without his help I would have sent it back. Thanks again to that person or I would have never been I able to actually use the product, finding out it very helpful to me after all.I was able to adjust it to a comfortable position my arm needed to be in, and to the length of my torso. It relieved so much pressure and muscle strain from my shoulder, making me able to relax my arm.Overall the product needs to be sent either assembled or be provided with detailed step by step illustrated instructions. Other than that it is made of strong, long lasting materials, constructed well and does the job it is meant to do.
Troy Balderson
Reviewed in Canada on July 22, 2022
Great harness, price was right. Shipping took a minute but not bad overall
W. M. Pidwerbecki
Reviewed in the United States on March 5, 2022
Lay the upper harness out on a flat surface facing forward towards you. NEXT lay out the belt the adjust the hip belt to fit your waist at belt line. NEXT clip the belt buckle and lay it flat below the harness.Remove the front straps from front buckles on the vest then feed the long ends through the side loops on the belt and feed them back up through the bottom of the shoulder buckles.Flip the harness and belt over and do the same for the back buckles. Disconnect the belt buckle and put on the vest.Connect the belt, and adjust the front and back straps by pulling on them! My spouse helped on the back straps.I used (4) #4 S-BINDERS on the chest and belt loops to hold the swinger cord and tools.Walter
Peyo Rubio
Reviewed in the United States on August 28, 2020
Product is hard to figure out comes in many pieces.
Lionel e.
Reviewed in the United States on January 7, 2020
It’s a good vest for the money well made
Recommended Products
