Your cart is empty.
Your cart is empty.Connects aftermarket radio to factory speaker harness. Includes antenna extension and adapter 15 feet long. This product is manufactured in China. Amplifier retention harness allows you to use the OEM amplifier. 5 inch long. This product is manufactured in China.
Gabriel Jordan
Reviewed in the United States on May 24, 2024
I guess it's because they have to make it fit so many cars, but while this is the right clip shape and size for my Vibe, unfortunately a couple key wires that my car has were missing (power and dimming). I was able to source a pinout chart an re-arrange the pins to work, but I was disappointed to have to do all that. Seems like you buy this kit to avoid that kind of work...
It’s good
Reviewed in the United States on February 26, 2024
Does the job
C. Holland
Reviewed in the United States on December 25, 2024
After several hours of futzing around, moving pins around, and being studying pinouts, I can confidently say you SHOULD NOT buy this harness if you have the 2010 Vibe. (*Yes*, you *can* get it to work. But you are forced to tap into Acc power elsewhere when you should not have to).Buy the Scosche GM18B instead. You wont need to tap into Acc power. You will still have to move some pins around, but the Scosche harness is WAY easier to do that with. And it gives you more wires to work with. Refer to the GenVibe dot com forum post titled "2009 Aftermarket Radio Harness" for more useful information.Good luck and good vibes on your aftermarket radio journey.
Paul C
Reviewed in Canada on February 1, 2020
Not sure why this is advertised as suitable for Pontiac Vibe 2009 and older. The harness is missing two important wires in correct positions (orange – dimmer, and red – accessory). The red cable that came with it is not necessary, instead there should be a pin/cable inside the harness to match the car harness. I ended up returning this product and purchasing a different one by Scoche (GM18B), which also did not have the red wire in the correct position, but at least it was easy to relocate it.
Josh Sumrall
Reviewed in the United States on July 29, 2018
Used this in my 2009 Silverado, without factory nav or on star. Worked great, I was able to avoid buying the expensive module with the only sacrifice being the loss of the chimes sounds. No complaints, actually kind of like not having the sounds now.
Francois Desbois
Reviewed in Canada on November 23, 2018
Worked perfectly in a 2009 gmc sierra, remember you will lose all chimes and instar.
Nathan Grimes
Reviewed in Canada on September 26, 2017
Fit perfect. No issues
ADIBOU
Reviewed in Canada on July 24, 2017
OK
DJB
Reviewed in Canada on July 18, 2017
Works great on 2010 Pontiac vibe but I did have to go purchase a smaller fuse tap to fit in the mini fuses that are under the dash for the power.
christian
Reviewed in the United States on February 1, 2016
Amazon says it will not fit a 2005 aveo, it works perfectly in my friends aveo that I installed it on, you do not need to run the extra red wire in my case anyway, the aveo is wired for the red wire already
Jeremy Martin
Reviewed in the United States on July 19, 2015
Worked great for my car, had to rewire one extra wire for the ignition switch, but I knew that heading into it. Fit my car as described.
Brent
Reviewed in the United States on March 16, 2014
After a couple days of research I found that I could this use harness in my 09 sierra, worked flawlessly!!! Wires are pre labeled so it's straight hook up. Saved me a TON of money vs the onstar harness which was well over $100
E. Smith
Reviewed in the United States on January 29, 2010
Great item right out the box. Very easy to understand wiring instruction, Plus they have a website if you need any help. They also include the red hot wire in case you have the 2006 chevy like I do and have to run a hot to the ignition to get a constant feed. Great product.
Recommended Products
