Your cart is empty.
Your cart is empty.Product Description
Milescraft Crown45 crown molding jig for miter saws will change the way crown molding projects are done. There is No more “upside down and backwards” Thinking when cutting. Innovative “right-side-up” cutting orientation, novice and professional alike can save time and money by cutting the stock correctly, the first time. With the Crown45, crown molding will be cut the way you see and install it on the wall.
From the Manufacturer
The Milescraft 1405 Crown45 crown molding jig for miter saws will change the way crown molding projects are done. With its innovative “right-side up” cutting orientation, novice and pro alike can save time and money by cutting the stock correctly, the first time. Gone are the days of thinking upside down and backwards, with this jig the crown molding will be cut the way you see and install it on the wall. Use the included angle finders to determine the spring angle of your molding, adjust the Crown45 to the appropriate angle, and you are ready to cut! An indented cutting surface allows for special dentil styled moldings and a collapsible design allows for compact storage.
Rz653
Reviewed in the United States on February 4, 2025
This is a good product, it did alright but wasn't able to get all the angles I wanted. Not blaming this tool, think it was just me being impatient and relying on old bad habits. Will continue work with it for now
Paul Rincones
Reviewed in the United States on January 29, 2025
Cool tool
KidRock40
Reviewed in the United States on September 2, 2024
Great tool if you’re looking to try do your own crown molding. Easy instructions. With video link. Only thing I can say that not positive is fingers and hands are uncomfortable close to saw blades. My first experience doing crown molding, finished product is amazing! Takes all the complexity figuring out set up for perfect alignment in corners. Well worth the investment. And wasted crown molding was minimal. So it pays for itself quickly.
Janet
Reviewed in the United States on September 14, 2024
Highly recommend this tool if you are doing crown moldings and are not experienced at it. Tried doing without it and it didn't go well. This tool is a game changer for sure and well worth the money.
Sabrina Bricker
Reviewed in the United States on July 3, 2024
If you’re going to do Crown Molding, this is an awesome tool to allow you to install it with ease. The photo shows my very first attempt at Crown Molding without any training.
bill russell
Reviewed in Canada on June 25, 2024
Typical Milescraft product. Made of high quality plastic and offers excellent support for any operations on wood. Highly recommend. Not cheap, but you will have zero complaints in use.
Paul Bran
Reviewed in the United States on May 5, 2024
This excellent product allows for the ability to cut crown molding perfectly every time. We just finished a project on my son’s new 3000 sq ft home, and it worked flawlessly. My wife, the trim carpenter of the household, had installed moldings for years using the flat cut method. She installed layer upon layer of moldings, often creating an appearance of 14-16” crown in our 130 year old money pit. The home had 12 foot ceilings and it looked incredible.The problem was that was 15-20 years ago and we have gotten old. This product made the entire process extremely easy. My son, with no experience at all, caught on very quickly . We used an adjustable clamp to hold the wood to the guide. That really helped since we were cutting 12 foot moldings.
Tommy G
Reviewed in the United States on February 21, 2024
Quality construction and I found it helpful when working with crown molding. This device definitely helps make more accurate cuts and and provides support while cutting. It's a little bulky so if you have a small mitre saw it may not work for all cuts if using a wide crown. Comes with instructions and videos online to help you if you need it.
Mark keefer
Reviewed in the United States on August 18, 2023
The product works but at times there’s a struggle to get a good cut on pieces longer than 4 or 5 feet. There’s a piece that selects the angle that should lock in place. It was always falling out almost every time I move it after a cut. I would recommend that they look at a redesign to fix this. My workaround was to wrap tape all the around to secure it. The other issue I had was that it’s not sturdy enough. To hold a piece in place while cutting requires some pretty good down force and the plastic design kept flexing. I would love to see them design in a downward clamp to hold the piece while cutting. Any slippage in any direction led to an improper cut. 1 degree off could mean an 1/8 in gap. Overall it allows you to just cut at one angle and makes it easy to go between inside and outside cuts. The product is good enough for small projects like a room or two. But anything more than that, I’d recommend taking the time to build a larger jig the mimics this products functionality.
VALDERIZ C MELLO
Reviewed in Brazil on July 5, 2023
Faz o que promete
Peter CV Harriss
Reviewed in the United Kingdom on March 8, 2020
Used when fitting kitchen concise worked great
Fernando
Reviewed in Mexico on November 13, 2018
Excelente calidad y muy practico
Beams
Reviewed in Canada on August 21, 2016
Super handy if your not a pro with the saw. I found it completely improved my mitres, but you need a pretty decent size deck on the saw for it to not be awkward to hold in place. Still worked great!!
Recommended Products
$11.97
$ 6 .99 $6.99