Your cart is empty.
Your cart is empty.Product Description
mike
Reviewed in the United States on November 21, 2024
Put one on my fuel regulator on my f-250 7.3 and it's all good. Not much else to say other than it works.
Jerome
Reviewed in Canada on August 28, 2023
👌
Patrick Lafrance
Reviewed in Canada on December 4, 2023
No more hoses… it’s a test and it works great so far
brad m
Reviewed in the United States on January 28, 2023
Way cheaper than I could buy vocally. Common 1/8"-27 thread tap. I used 11/32 bit before tap, worked fine. Holding 150psi air pressure with 250° temps.
JAJMA
Reviewed in the United States on July 10, 2022
1st order I was given the wrong part. 2nd one I got the correct ones.
Rafael quintero
Reviewed in the United States on August 22, 2021
Buy
Carlos
Reviewed in Mexico on July 5, 2021
Para rellenar un bote de aire comprimido
FiestyBerry
Reviewed in the United States on July 3, 2021
Just what I was looking for.These are what is needed to replace the Junction between the valvestem and CTIS wheel hose on a 900 series 5ton military truck. They may be the same for an LHS or LMTV truck as well.If you own one of these trucks get a pack of these as they are a weak link in the system and are easy to break when changing a tire. Coming with the schrader valve is nice as well as it’s a place to delete the CTIS at that particular wheel.
jay.lee
Reviewed in Canada on August 29, 2020
Solid brass, threads are clean. Some of the valve stems were a little loose - presumably from being shaken around in transport - but were easily tightened back up and worked fine.
mike scuric
Reviewed in Canada on December 5, 2019
good value and material
M. Rein
Reviewed in the United States on November 10, 2018
They are as advertised and are of good quality. What more can I say? They don't leak and are nicely finished.
AW
Reviewed in the United States on February 22, 2017
I used this to build a boost leak tester for my Mazdaspeed3. I drilled a hole in a PVC cap and used this in conjunction with the Spectre 3" to 2.5" Intake Coupler and it worked perfectly. I added RTV on the threads for safe measure. I only tested it up to 20 psi but worked for what I needed it to.
E. K.
Reviewed in the United States on December 10, 2016
These valves came in a two pack. They are good quality and the threading is slightly thicker as it threads in. This was perfect because I used it to be able to pressurize a scepter water can. I would recommend these to anyone!
Recommended Products