Your cart is empty.
Your cart is empty.Product Description
Why do you need a YSJWAER mini table saw?
The YSJWAER Mini Table Saw has cutting, sanding and engraving capabilities. A full range of accessories is also available. Let you enjoy the fun of DIY handmade creation at any time.
CD
Reviewed in the United States on May 9, 2025
I am building a DIY table saw with custom features and needed blades and grinder accessories. The YSJWAER kit is perfect for my needs. It has four blades; high speed steel, alloy saw, resin saw and PCB cutting attachments. There are 10 sanding wheels of different grits but there are no markings on the reverse to tell what these numbers are. So I feel the surface of the sanding wheel and then compare it to regular sanding paper in my shop to select the correct one for the table saw. The kit includes a sponge wheel and a felt wheel for finishing. I like this kit because it has the minimum grinder accessories I need to supplement the other custom accessories I am installing.As with handling any tool, proper safety gear such as safety goggles, face masks/respirators and gloves since those blades are sharp.
Rick
Reviewed in the United States on May 30, 2025
I use this to make bridges for classical guitars and ukuleles. Perfect size for small projects.
bryon k cornman
Reviewed in the United States on May 29, 2025
as advertized
The Smiths
Reviewed in the United States on May 26, 2025
I already have the mini saw, and this accessory kit really takes it to the next level.The variety of blades included allows me to switch between materials easily—wood, plastic, and even some soft metals. Everything fits securely, and there’s no wobble or cheap feel. The cutting is smooth and precise, and I haven’t had any issues with the tools dulling prematurely.What I really like is how this set expands what I can do. The sanding pieces have come in handy for smoothing down edges and polishing small parts. It turns the saw into more of a mini workbench setup.For the price, and given how solid the quality is, this is a great buy—especially if you already own the base saw.Pros:-Wide range of attachments-Blades cut cleanly and accurately-Sanding pieces add extra versatility-Good build quality for the priceCons:-None so far
Customer
Reviewed in the United States on May 2, 2025
The first thing I'd like to say is that I was not expecting much from this little table saw I just found it to be neat so I got it. That said, I have been extremely impressed with this little thing for the most part, it cuts right through half inch wood rods without any issue and with the abrasive disc it does a nice job at cutting metal,I've used it to cut 1/4inch brass rods and it does it without any issues. I have not used the drill chuck attachment yet so I can't comment on that but the rotary tool works well and it does a nice job cleaning up burrs when cutting metal. One of my complaints is that the guard blocks a good bit of my view,the only other complaint I have is that I wish the cord was a good 5 foot longer because this saw is small enough to bring to places and that extra cord length would have been super useful. Other than that this is a neat little saw that's nice for when im working on small projects.
Malicorneus
Reviewed in the United States on April 7, 2025
One of my hobbies is building model ships in wood. Until I got this I had three power tools I used in this endeavor:+ A small table saw+ A belt/disk sander+ A jig sawThese three took up a lot of space on my workbench, so when I saw (har!) this little multi-tool I thought “ah-ha!”So, it does a lot. But first: what you get:+ The little table saw, which does not actually have a saw in it. At this point+ A collection of small circular saws. With and without teeth. I think the without teeth are for non-wood stuff. Since I’m only using wood, not of interest to me.+ A Velcro pad on a spindle on which to attach various sanding disks and buffer pads+ A flexible drill extension.+ Lots of little toolsASSEMBLYTable Saw. This is a little bit (har!) tricky. You have to finagle the saw blade into position (along with a locking collar) from underneath the table and then screw in a tiny screw to hold the collar and saw in place using the supplied Allen key.Sanding Pad. For this, you have to position the connector for the sanding pad spindle onto one of the two axles and then attach it using two tiny screws using the supplied Allen key. TIP: put the screws in part-way before trying to put the connector on the spindle.Flexible Drill Extension: This goes on the axle on the other side of the table saw. Pretty much the same process as the other end.CONS (-):- Single speed, can’t adjust how fast it runs. I’m thinking of pitching through a rheostat to adjust the 24v input to see if I can slow it down. Might update this review if I get that to work- Everything runs at the same time. So while you’re sawing (with the saw), the sanding disk and flexible drill extension are also both running. Also, while you’re sanding, the table saw and flexible drill extensions are also both running. And,… If you happened to be using the flexible drill extension, you’ll never guess what else will also be running.- Since various things are running at the same time, best be careful about where you put your fingers. I usually disconnect the flexible drill extension unless I’m using it.SUMMARY:Really useful little tool. Replaced a couple of the much larger tools (but not the jig saw). A little tricky to put together, but not bad. Since it does a nice job for my small models and frees up a lot of room on my workbench, it works for me.
Mick
Reviewed in the United States on April 7, 2025
Perfect OEM replacements. Informational: The sanding discs are 600 x 4, 400 x 2 and 240 x 4 grits.The quality is as expected. No better or worse than the blades that came with the mini table saw and all the blades run true. The 1 star deduction is simply for the price. I've purchased replacements individually, direct from China, and they work out to be considerably cheaper (IE., $1.50-$2.50 per blade or $7 for all 4). This kit has the convenience factor of not having to wait for extended shipping times, but the price is a little steep and may contain pieces a person may not really want or use. In my case, I was mid project and in need of a new rip blade so convenience won out. I will also, eventually, make use of every piece in the kit.** I noticed in another review that the rip blade was supposedly missing, but I also see the white cardboard package in their photo that contained the rib blade in mine. It's the only blade/accessory that isn't readily visible through the bag and makes me wonder if they opened it to check before posting a review(?)
stan Pyne
Reviewed in Canada on April 19, 2025
Works well but limited on cutting due to small table and guidance, bolts holding guide difficut to insert, attachment stem hard to get to with allen key, need patience, blade adjustment with allen key not as easy as shown, yo must have small fingers, large fingers will never gt into the spaces provided.
derp derpington
Reviewed in the United States on April 15, 2025
Price seems a bit steep for a tiny bag of accessories, but it's not too bad. A good selection of parts though, so I'm ok with it.
Recommended Products