Your cart is empty.
Your cart is empty.The bracket and top plate allows you to easily slide the motor inboard (up to 6"), or easily remove it for storage and security. Features corrosion-resistant anodized aluminum construction with stainless steel hardware. Compatible with Ulterra, Serova, Power Drive, Power Drive V2 and Deckhand 40.
Dave Mason
Reviewed in the United States on February 19, 2025
Easily remove the Minn Kota. Reinstall and lock it. Done.
bernie
Reviewed in the United States on June 6, 2024
I like how easy it is to remove my trolling motor for storage. And the ease of connecting it back up.
Customer
Reviewed in Canada on January 10, 2024
Love this this quick release. It is works well. Recommend attaching it to the motor to properly template a perfect mount position.
Golfer and fisherman
Reviewed in the United States on April 20, 2024
Very strong, easy to mount, very competitive price compared to similar products. Would definitely recommend that anyone installing a trolling motor consider a quick removal bracket. I like this one.
Client d'
Reviewed in Canada on September 26, 2023
La seule chose c'est la vis à côté pour tenir le moteur..un peu dure à visser
richard p.
Reviewed in Canada on May 6, 2023
All great
Rick K.
Reviewed in Canada on May 30, 2023
Makes install and removal of motor a breeze.
Dana
Reviewed in the United States on March 2, 2023
Easy to install and worked well with my minn kota.
Michal
Reviewed in the United Kingdom on October 21, 2023
Very good bracket, working like originally, no problems with fitting outboard engine
David R
Reviewed in the United States on January 19, 2023
Wanted to be able to slide TM back a few inches to get out of the way and not spend hundreds. Gave this a try. It works perfect. Added a few more positions to lock in the slide. Its heavy built aluminum plate.
Mike
Reviewed in the United States on September 20, 2022
disliked ,no instructions. had to u tube a vidio. no way to tell you from bottom. once on the boat it is very solid and work easy.
umberto urmooski
Reviewed in the United States on August 23, 2021
Nothing but good things to say about this product. Bolted right into the existing mounting holes and the bracket bolted right into the motor base. Works great and looks good too.
1techguy
Reviewed in the United States on October 25, 2019
Well, my particular boat hull has almost no access to the bow's underside. When I installed the terrova to my basss tracker heritage model It took several hours trying to put bolts and nuts directly through the trolling motors base and through the bow's deck. The access is only about 7 inches wide and about 1 1/2 inches high so getting the hardware to the forward bolts are quite a frustrating task with almost no visibility.I had to fabricate a tool to handle the nuts and washers because the closest bolt is over 1 foot away from the access and the furthest is just over 2 feet. Well, I had a failure of the TM and had to remove it for a warranty repair so I had to drill the bolts out to get it off the boat.I decided to purchase this quick release bracket for 2 reasons, 1) I don't want to have to go through all that frustration & wasted time every time I need to remove it for whatever reason and 2) I wanted the feature where I can move the trolling motor BACK for a better fit of the fitted cover ( which did not fit when the upgrade trolling Motor was Fixed very far forward) and at other times to avoid Trolling motor contact with anything forward of the bows point.NOW with the QUICK release bracket installed I can easily remove the motor OR just pull it back to use the boats cover as designedAn added benefit is that there are four pre-drilled mounting holes for the bottom plate which attaches and remains fixed to the boat BUT my aluminum boat has a plywood reinforcement beneath the bow so I used 1 MOLLY BOLT and skipped the nut and bolt routine completely opting for very large wood type screws. Since there was room on the brackets attachment plate, I added additional reinforcement screws for a total of 8 attaching bolts and this plate is not going anywhere anytime soon. Doing this made the installation Very easy because the upper plate of the bracket matches the TM's Bottom base exactly so its is very secure as well with 6 nuts and bolts.One negative point is that there no provision for securing the motor or even holding it in a fixed position WHEN you opt to slide it to the backed up position IT IS JUST LOOSE and that is why I gave 4 stars instead of 5. The bracket only has a threaded pin which keeps the trolling motor secured ONLY IN the FULL FORWARD POSITION..I had to get out the tap and die set and modified the bracket to have an option to insert a threaded bolt when the base is in the retracted position. This would have been a very easy fix at the manufacturing level but I guess no one thought of the real world issues other than the fully forward position. I also added a hole to add a small pad lock so someone can't easily just walk off with the whole unit. After all it is now easily removed from the boat in just moments.
Recommended Products
