Your cart is empty.
Your cart is empty.Product Description
USE TITANRF FARADAY TAPE TO CREATE RADIO FREQUENCY SHIELDING ENCLOSURES
LAB TESTED & CERTIFIED TO SHIELDING EFFECTIVENESS STANDARDS IEEE 299-2006
TitanRF Faraday Tape has been tested and certified to meet shielding effectiveness standards IEEE 299-2006. IEEE 299-2006 is the standard test method for measuring the effectiveness of electromagnetic shielding enclosures and materials. A properly-shielded device will effectively retain all RF energy in its faraday enclosure and keep all external RF isolated. The TitanRF Faraday Tape is advertised as a material that can be used to isolate devices by blocking the frequency range most mobile devices and electronics transmit/operate within. To provide validation for this claim, the shielding effectiveness test measured how well the tape shields frequencies between 1.5GHz to 40GHz. The positive test results provides authentication of its shielding abilities. The full "passing" test report and signal attenuation graph is available upon request
TITANRF FARADAY TAPE OFFERS THE NEXT GENERATION OF FARADAY SHIELDING
The high-shielding conductive adhesive tape is available in 1 inch, 2.5 inch, and 10 inch widths, and comes in either 10 feet or 164 feet length rolls. The tape can be easily cut and taped to surfaces for creating do-it-yourself faraday cages or RF shielding enclosures, EMF radiation reduction, EMI shielding and deflection, or connecting two sheets of TitanRF Faraday Fabric.
If using with TitanRF Faraday Fabric, place the sheets together and overlap slightly. Adhere the tape to the front and back layers to seal both sides. Make sure all edges are covered. The tape is extremely strong and cannot be removed easily once in place (may damage the fabric if removed).
The tape can also be used like a patch to easily repair a punctured faraday bag.
Primary applications include shielding electronic devices from RF signals, defense against EMPs, protection against EMF and EMI radiation, industrial signal proof rooms or tents (military, construction company, IOT developer), DIY consumer RF shielding cages and enclosures, data security, and to enhance digital privacy.
TEST YOUR FARADAY ENCLOSURE WITH THE FREE MISSION DARKNESS APP
Use the Mission Darkness app to test the shielding effectiveness of your faraday projects. It allows the user to perform a test using WiFi, cell, and Bluetooth signals to determine whether the faraday enclosure completely or only partially blocks signal transmission. Just look for "Faraday Test” for iOS or "MD Faraday Bag Tester” for Android and test the signal shielding strength yourself!
P. Holmes
Reviewed in the United Kingdom on April 7, 2025
After finding interference on my DAB radio whenever I switched on the dash cam I tried everything, new aerial, ferrite chokes and amplifiers to no avail.I then wrapped this tape around the power cable, and no more interference.
David Dean Garson
Reviewed in the United States on June 8, 2024
Works great for cleaning up CAN Bus network.
Vic
Reviewed in the United Kingdom on December 14, 2024
Used this to help make a phone pouch and it works great. Very adhesive which is possible to peel off worry a little effort. Just wish the roll was longer.
Sandra Smith
Reviewed in the United States on November 26, 2024
Sticks fine to the fabric but to metal etc would be nice if it was more like a duck tape adhesive
Customer
Reviewed in the United States on October 11, 2024
works
M. MacBradaigh
Reviewed in the United States on January 30, 2024
I very easily made my own faraday cage in case of EMP or Carrington Event to house my small electronics, and this TitanRF Faraday foam gasket made it easy. Some designs called for aluminum tape to completely seal the can, but then you can't easily get into it and have to re-tape it every time. The Faraday tape in conjunction with the Faraday foam gaskets (linked below) make it cleaner and easier.I bought:• Behrens 20 Gallon galvanized steel garbage can from my local hardware store• TitanRF Faraday foam gasket (https://www.amazon.com/gp/product/B08KS6GKCX/)• TitanRF Faraday tape (1" x 10')For the 20 gal garbage can, one roll of 1" by 10' was enough. I used the tape to line the seems of the can, and holes where the handles are, and also to help hold the foam gasket in place along the inside of the metal lid. The foam gasket has sticky back, but it wants to bend in, and the tape holds it place.The lid presses down tight into the foam gasket creating a seal, and blocking radio waves. I tested it with a handheld radio set to NOAA and with the volume all the way up. The signal totally dies when the lid is all the way closed. No radio waves are getting through.Make sure you line the can with something non-conductive. I used old carpet scraps.
Cliente de
Reviewed in Mexico on May 25, 2023
Bueno, aún no lo he probado,pero mientras pueda bloquear las frecuencias de envío y recepción del módem,soy feliz.Si Dios quiere y sale todo bien,agregare foto para cuándo me llegue la tela.
Kevin C.
Reviewed in the United States on November 8, 2023
Works very well and is made well also .
Filippo Gratino
Reviewed in Italy on September 12, 2022
Facile da applicare...
Cynesige
Reviewed in the United States on November 27, 2022
I had some bad interference of a USB-3 hard drive causing lag in my bluetooth keyboard and mouse. It would sometimes take 15-20 seconds for letters to appear after I typed them, or they wouldn't appear at all. I wrapped this tape around the USB cable to the hard drive and, voila, problem gone. This is expensive stuff but it does actually work.
Joshua Szanto
Reviewed in the United States on April 5, 2020
I bought this specifically for "turning off" the 2.4 GHz Wi-Fi from a LEDnet light strip and wrapped the controller box with two layers of this TitanRF faraday tape. The signal is unaffected; the tape did not accomplish the hoped for outcome. The application I am using this for is not of a tinfoil hat reason, but rather to control and clean up our airspace in our environment as much as possible so that only our Ubiquiti WAPs are broadcasting Wi-Fi networks. While the product description does not explicitly say that it will block Wi-Fi signals being broadcast in 2.4 GHz and 5 GHz, the marketing of this product makes it seem so. Either the advertising of this product is misleading, lacking in clarity for applications (technical specifications I mean), or a scam. If it is a scam, I am not saying that the science behind a faraday is wrong, but I refer rather to broken trust with whoever is selling and manufacturing this.
TinkerGuy
Reviewed in the United States on December 11, 2019
I used this MuMetal clone to GREAT effect on the top cover of my Anthem Statement D1 preamp processor and to cover the transformer of my Proceed AVP-2 processor, to prevent external noise from my network streamer (that sits on top) from being introduced to the Anthem internals and to prevent any leakage from the Proceed’s transformer into delicate internal circuitry. I use a powerful high class-A bias A/B amp (250w/channel into 8 ohms) and speakers with true Ti diaphragm compression drivers; everything is now SILENT even with my ear pressed against the horn throat with either processor. Ridiculously effective for the price.Note: the tape is VERY sticky. Much like high quality duct tapes, if you dribble it over into itself (i.e. make an accidental sticky sandwich), it’s just done. So go slow and be careful.HIGHLY HIGHLY recommended!!!
Recommended Products