Your cart is empty.
Your cart is empty.Product Description
Universal Leg Extension Kit：
Portable grill leg stand rear-mounted with wheels makes moving the smoker easily, smoker stands with wheels raise your Digital Smoker to a comfortable cooking height and is also easy to move around.
For Masterbuilt Electric Smoker Stand：
Universal Leg Extension Kit helps control the smoker grill and helps make grilling easier
Universal Electric Smoker：
Portable Grill Leg Stand Rear-mounted with wheels makes moving the smoker easy
Universal Leg Extension Kit：
Raise the smoker 10 inches with the BBQ Future Smoker stand to have extra space underneath the smoker to store extra wood chips and tools will be easier to access
Universal legs for Masterbuilt smoker help control the smoker grill, made of heavy-duty steel, it has a certain weight-bearing capacity and helps make grilling easier for a long time
Michael K. Grovenor
Reviewed in the United States on March 28, 2025
I'm not really happy with this stand. Even though I got it to fit, it was a PITA to do so. The 4th cross beam was off by an inch and I had to get my innere Hulk on to fix it. Once installed the smoker tilts back a few degrees but that's ok since goo drains out the back. Go gravity go! It's not level though and there are no leveling feet or holes to install the factory one's you have to remove for installation. I will drill holes and install the leveling feet but that will make the unit tilt backwards even more so we shall see the outcome of my idea. I will post an update when I do. Overall I recommend going with the OEM stand not this aftermarket junk.
Timothy Valentine
Reviewed in the United States on March 14, 2025
directions were not good,
Charles T. Boyle
Reviewed in the United States on February 26, 2025
The only reason that I purchased this stand is that the one I bought about 7 or 8 years ago got bent up when the bungi cord that secured my original one to a fence post failed and the smoker with the stand attached "flew away". The smoker with the stand attached became bent up(destroyed) during the wind storm. This is for the replacement. I hope that it Iasts as long!
Stephen A.
Reviewed in the United States on April 25, 2025
I should have believed the product reviews before I ordered it this leg kit. The pre-drilled bolt holes that attach the legs to the bottom of the smoker are not in the correct position to install the leg braces that come with the kit. In particular, the 18-inch braces were too long to fit across the back legs or to fit properly across the front legs (see photo). In order to jury-rig the kit for my 30-inch Masterbuilt smoker, I had to fasten the leg bolts through the oversize structural holes next to the bolt holes. This was accomplished by overlapping the bolt heads and washers on the edges of the oversize holes -- not proper construction technique. All in all, it was a royal pain to assemble and ultimately required a lot of additional time and creative engineering. This kit is very poorly designed for its intended application.
LLB
Reviewed in the United States on November 23, 2024
Didn’t realize when we purchase a smoker for my dad that it didn’t have a stand. Came online and found this one and it was perfect. It gives it just enough height.
Truesdale
Reviewed in the United States on September 10, 2023
I bought a 30" Masterbuilt digital smoker and ordered the leg kit for it to make access easier. The kit came to us well packed with all of the parts very well packaged. The instruction booklet listed all of the parts and they were all there. The kit was for both 30" and 40" models so in the end there were some parts that were unused.The problem came as I tried to determine which holes in the legs to insert the bolts through to attach them to the smoker. Mind you, I have a very high mechanical engineering aptitude and am often the go to guy in the neighborhood for such things. This one almost got me. I worked on this for over an hour, trying to study the instruction booklet. The diagrams are dismally small and hardly of any use.The good news is that I conquered and can tell you how to assemble it in half an hour or less. First, get out your metric sockets and a Phillips screwdriver. Then, determine which parts you need between the legs based on whether you have a 30" or 40" smoker. Assemble the legs and the cross pieces loosely with the 16 screws and nuts (no washers). Do not tighten them, just hand tight without the screwdriver. Then set the legs on the base of the smoker with the smoker inverted. Adjust the legs so that they are in the right positions and locate the proper holes to use. There are either four or five to chose from. Once you have them located, put in the bolts with the four washers that are included. Now tighten down all of the bolts, nuts, screws and turn the unit over.
Customer
Reviewed in the United States on May 28, 2023
Purchased these to replace a rusted legs with shelf. I miss the shelf but these legs are very sturdy and were easy to replace.
Customer
Reviewed in the United States on May 15, 2023
Good product. Plenty of seradjustment holes. Fits great!
Recommended Products