Your cart is empty.
Your cart is empty.Product Description
MOHERO 1.9" Alloy Beadlock Crawler Wheels Rims Set for 1/10 Axial SCX10 TRX4 Bronco CC01 RC4WD D90 D110 RC Crawler Cars
Blue
Black
Silver
Brian E
Reviewed in the United States on March 10, 2023
Easier to put together than you would think. Look and feel good, but I noticed several spots on them that won’t come off. Kinda sucks actually. The center hub “cap” will not work with my TRX4 High Trail. The axle is to long for the hub “cap” to be screwed into place.
Jack c.
Reviewed in the United States on December 10, 2022
Where's the other three?? In the description it says Wheels (s) set. A set of wheels means four correct?? It does not match the description it says it is you only get one not four like it shows and says very disappointed. I paid $21 for this one wheel to get shipped thinking it is a full set because of the description so that's $84 for this set of wheels not worth it one bit
Frankie Hanes
Reviewed in Canada on November 10, 2022
Looks good on one side ,,,, can’t complete because of missing rings
Lenin
Reviewed in Canada on January 24, 2021
These wheels are a little bit bigger than normal 1.9 wheel. They will stretch your 1.9 tires and no other 1.9 wheel will fit properly after that. I returned mine.
Customer
Reviewed in Canada on January 20, 2021
A lot of screws! But wow are they ever nice looking. Go together super easy. Nice solid chunk of metal
Glenn Ploucher
Reviewed in the United States on August 4, 2020
These wheels are horrible very nice looking but screws strip and they don't seal depends on tires you are running
Christy
Reviewed in the United States on July 29, 2020
At this price point these are great wheels but don't expect a perfectly finished product. Only 2 small complaints though. First, the center caps are made completely flat on the mounting side and the hole is not big enough for a flanged 4mm nut. 3 solutions I came up with are use standard 4mm lock nuts, Let it rest on the flange and leave a small gap between the wheel and center gap or use a reamer and take away just enough material to allow the flange nut to set flush in the center cap. Pic shows I chose the reamer and there's plenty of room for the nut to fit flush without cutting all the way through the center cap. Second complaint the hex, which is a machined part of the wheel and not removable, sets in very far from the back side of the wheel. These are not a direct fit on the element enduro sendero because the wheel hits the steering linkage just as it starts to go on the stock hex. I am currently waiting for some 10mm wide hex drives to come in to hopefully remedy this issue.Now the good.First thought was to return them. After inspecting them and considering the low price I decided to make them work or throw them away. Overall they seem to be a quality product. Absolutely no scratches, scuffs, dings, chips or anything of that nature anywhere. Every hole and screw is threaded perfectly. Came with all screws needed plus 4 extra. Wheels seem solid , light, but solid. What really sold me on these is that they are full blooded bead lock wheels, the front and back of the tire are held on by the same, interchangeable,12 screw bead lock rings. Finally, I can attest that pro-line class 1 hyrax fit flawlessly and went together fairly easy.
M Wright
Reviewed in the United States on May 28, 2020
These are some of the best aluminum bead lock wheels for a standard 1/10 RC Crawler I have ever seen. Very real with 16 stainless threaded lock bolts on each side, and then another 8 for the front cover on nut side. I did have an issue with the inside diameter since my SCX10-III has 1 2mm hex nuts, but they axle assembly was too wide and needed to be extended by 8 mm or better to get the correct fit. I chose 12 mm x 15 mm wheel extensions to get best fit, and clearance as well as proper look and stance. The quality is second to none, and the color was perfect for my blue Jeep paint job.
John
Reviewed in the United States on November 24, 2020
Very nice bead locks for the money. The anodizing could of been a little thicker but for the money it’s good enough. Very nice looking. One thing that is a must if you have a TRX 4 sport, you will need 5 mm minimum extended hexes for them to fit. I don’t know how people are getting away with 3 mm but +5 mm was just about the right amount is space needed to clear the portals. Get the Treal +5 amd you won’t be disappointed.
Thomas E. Gaglione
Reviewed in the United States on January 27, 2020
I bought these wheels/rims for my Axial SCX10 II Jeep. 24 bead lock screws on both sides, took me a while to set up, but overall worked out fine. These rims look great and work well with my Proline Hyrax 1.9 tires. They are a bit heavier than other rims I have (which is a good thing in my opinion). They took a while to get delivered, but arrived fine and are very good.
Anthony
Reviewed in the United States on August 27, 2018
Love these wheels. I havent recieved mine yet but have seen them on other trucks and loved the weight they added and quality construction that went into them.If I had the opportunity to do product reviews for this company I wouldnt hesitate to jump at the opportunity.
Recommended Products
$46.99
$ 23 .99 $23.99