Your cart is empty.
Your cart is empty. Tool Tube is the ultimate, rugged and versatile solution for transporting and storing tools and much more.
-Motorcycle Tool Tubes with waterproof O-ring, which can be used as storage space for gloves/raincoats/etc.
-Material: Molded from High Density Polypropylene
-Size of this product:
Length: 355mm
Inner diameter: 80mm
Mounting screw holes: 7.8mm
Center distance of two screws holes: 315mm
Package Includes:
1 x motorcycle Tool Tube, 4 x tie wraps and 2 x elastic clamps.
chrisinboston
Reviewed in the United States on August 21, 2024
I use this under my trailer to keep the registration and my keys when I go fishing.
Joseph Smith
Reviewed in the United States on March 16, 2024
The mini diameter is labeled 55mm but is only 45.9mm unfortunately. Making what I need to put in unable to fit. On the other hand the small is way too big. Otherwise a fairly sturdy container.
retrob
Reviewed in the United States on March 1, 2024
I selected the blaze orange color canister in order to secure my emergency electronic signal flare and emergency flag on my boat. All the items fit inside the canister very well. Good bye pyrotechnics signal flares that are pricey and expire needing to be replaced rather often.
Luis s.
Reviewed in Mexico on January 29, 2024
El material es resistente y el espacio necesario para las herramientas de la motocicleta 😁👍
Bobby Hill
Reviewed in the United States on March 15, 2023
I bought this to put on my Honda CRF450RX in place of the left exhaust pipe that was removed to put on an FMF exhaust with spark arrestor. I cut off the mounting tabs with an angle grinder and mounted it using hose clamps to a bent piece of 1/8 inch aluminum bar extending from the original exhaust mount bolts. 750ml fuel container fits in there nicely with thin foam keeping it snug. Can also put tools, food, whatevs. I tried to upload photos and I can see them uploaded but it says “Hmm, that didn’t work. Tap thumbnail to retry.”
Gregg
Reviewed in the United States on January 17, 2023
Very useful on a bike !! I bought two of those :On one side i carry my rain outfit (and a small Isotherm shopping bag) so it stays on the bike and it's always available. And on the other side i carry a MSR bottle of gas so on long distance trip i get to run the bike some extra miles that already allowed me to reach a gas station when running out of gas.
Araz
Reviewed in the United States on July 21, 2022
The mid-size tube WOULD fit a 1 liter MSR bottle IF and ONLY IF one does NOT buy the model with the locking cap. Such model has bolt threads and nuts that protrude into the canister and prevent the bottle from sliding in. You have to remove entirely the locking assembly to make the bottle fit, but then you have two open holes. You can of course cover the holes with tape, or more securely, or leave them open. But you will not have the benefit of the locking capability.A second issue is that for my motorbike, a pretty large one, I could not find a good place to install the tube. Connecting it to the inside of the pannier racks cannot work using the provided (very nice) attachment clamps as the pannier then will be not fit into the rack because the clamps block the way to attach the panniers. One can attach the tube using the provided sturdy cable ties but not easily as room is needed for the shock, muffler, etc.. I could barely find a place to mount it but only using the cable ties and even then it they would have to be a little loose because it cannot be brought snug against the mounting points with the result that the tube vibrates around (which is not a good, secure solution).Short story: I think the mid-size bottle is suitable for a 1 liter fuel bottle but without the locking feature, or with the locking cap for tools and stuff, but isn't a sure thing even on a pretty large motorbike if you use hard panniers; your bike may be different. I'm going to buy the tight fitting fabric holder which actually costs a few dollars more. Alas, it's too late to return my tube.
Alan Casey
Reviewed in Australia on December 3, 2022
Tool box on motorcycle
Rjgogo
Reviewed in the United States on January 19, 2021
was looking for something to hold a few tools on my tractor and found this. Was able to hog out the top holes so they fit a 2" square u-bolt and attached to the ROPS on my tractor. This holds what I need and fits well on the tractor. shipping is most of the cost on this but ok with paying it as I don't have to go anywhere and it works great. I no longer have to put tools in the cup holder and hope they stay there. Lost two wrenches that way. Rain proof as well. Solved a problem for me.
Sean
Reviewed in Australia on September 3, 2020
Awesome storage tube. Great value
RWells
Reviewed in the United States on July 14, 2020
I bought these for my tractor as tool storage. They work perfectly for it but my five star review is for durability.Yesterday I was doing some grading work and as I was backing up I heard a crunch and pop. I crushed the tube against a tree. Hard. I thought it was broken for sure and I’ve only had them for a few weeks. Nope, not one crack. It was a little deformed and with some patience I was able to coax it back into shape and the lid was able to screw back on. I couldn’t believe it. The waterproof seal works great to keep tools dry and it’s y’all enough for channel locks and a large crescent wrench.I highly recommend these for more than just motorcycle use.
Recommended Products
