Your cart is empty.
Your cart is empty.Product Description
The motorcycle windshield extension can be significantly better and faster driving noise can be minimized.
The windshield spoiler is supplied with extension arms and Double Hinges to provide an increased range of movement and adjustment - giving a total up/down vertical range of upto + or - 110mm/4.33inch, while still providing the same adjustment of the spoiler angle, regardless of the spoiler’s height.
Package include
1x Adjustable Windshield with accessories and tools
Fitment:
For honda yamaha suzuki kawasaki bmw aprilia ducati buell victory and more
Band With windshield models universal.
Suitable for nearly any bike with a windscreen.
Multi-angle adjustment
Multi-angle adjustment, the total up and down vertical range up to +/- 4 inches.
Adjustable state
When the button is in a horizontal position, the support arm can be adjusted.
180° adjustment
Wide range of angle adjustment to meet the needs of various heights and angles.
Locked state
After adjusting the windshield extension to a proper angle, rotate the button to make it vertical and horizontal to fix it at the angle you want.
360-degree adjustable clip
The angle of the clip can be adjusted 360 degrees. So you can adjust the angle and distance between the extension of the windshield and the original windshield of the motorcycle to any effect you want.
Locked state
When the button is close to the support arm, it is locked. The clip can not be adjusted.
Please make sure the button is in the locked position before riding.
Tighten the set screw
Tighten the fixing screws to ensure that the windshield extension plate is firmly fixed to the original windshield.
New Locking Screws with instructions
New Locking Screws (With non-slip gasket)
We recommend that customers replace our New Locking Screws, the use effect will be better.
Replacement is very easy , and you can have a better fixed effect.
Item detail
Condition: Brand new
Color: Transparent
Bracket distance of spoiler: 210 mm (8.27 inches)
Overall Width of spoiler/airfoil: 285 mm (11.22 inches)
Overall height of spoiler/airfoil: 120 mm (4.72 inches)
NOTE:
Mounting width required on your bike's original screen between hinge posts is 210mm / 8.27 inches (+/- 10 mm / 0.5 inch, dependent upon your screen's curvature).
Please confirm the size of the original windshield on your motorcycle that can be installed, and choose a suitable size before placing an order.
artvark
Reviewed in the United States on June 16, 2024
Firstly this product does not match the description. The quick adjustment tabs have been deleted because they fall off on the highway. They have given you some thumb screws and Wing nuts to compensate. These are not easily adjusted when going down the road. Secondly even with the set screws mildly tightened it cracked my windscreen in many places. My windscreen is no longer produced. I wish I could file a claim for compensation.
Jean Tremblay
Reviewed in Canada on May 26, 2024
très utile
robert c thompson
Reviewed in the United States on February 18, 2023
Came with upgraded hardware to secure arms to mounts wich I think solved the issues with failure or weakness others have had .Ive found this a fantastic product works extremely well, tested at 110 mph and zero issues. Completly solid and has eliminated any helmet buffet at hiway speed while still maintaining a nice view over the top. I honestly feel this has made the front fairing more stable making bike more stable as well. The mounts are rock solid and I can not understand how this would ever just fall off. At this price it's a no Brainer for me . I bought the smaller version 11 inch, and has worked so well i just placed an order for the bigger one 14 inch from a different company. I prefer the clear version as well because when mounted it is in the lower line of sight. Something to concider especially if riding on rougher roads helps to see what directly in front of you.Update: the one from other company came today is not the same quality at all, returning .these wind screen are not all the same accross amazon as ive read from other reviews .I didnt realize motoparty sells a larger one aswell so I ordered one from them. will follow with Update..Update: larger deflector came and I am just as happy with the product if not more, suits my very large motorcycle better. See my review on the larger from this vendor . I'm going to try the large deflector with the non upgraded plastic hardware and see how it does. I followed the instructions about pushing in the 360 locks to secure after adjustment and I have a feeling it will hold up just fine. I will update if the fail and go back to the upgraded wingnuts....
Mike T.
Reviewed in the United States on July 23, 2020
So I'll tell you that for the money that you pay, this is an excellent alternative to the more expensive branded ones. However, I'll also tell you that for what you pay, you shouldn't expect superb quality and build materials. Does it work well as designed to defect wind in an adjustable fashion? Yes, absolutely. I've installed it on my 16' FJR just for a little more height on the touring screen that I have and it definitely works. Was easy to install and stays put. I'll try to break it down into a list of pros and cons.Pros:-Very affordable-Easy to install-Easily adjustable-Works well at deflecting wind-Easy to see through-Has stayed put through high speeds and for more than 1000 miles already.Cons:-The first one I got was definitely off-centered and nothing I did would get it to sit on the stock screen level, that was easily remedied by contacting amazon and they sent out a replacement in a snap.-It's made from a PlexiGlass material and you'll notice it immediately when you take it out and hold it up next to your actual windscreen-The directions are included but aren't the clearest. I can see someone less mechanically inclined struggling a bit-It's 80% impossible to see through it when it gets wet, I think it's due to the fact that it's that weird plexiglass material- It gets dirty in a really strange way, like not like the windscreen so often it's harder to see through and you'll need to clean it more- I think it has some weird components or film on it because after I use my microfiber to clean it, it leaves a weird hazy film on my windscreen and it won't come off unless I let both it and the windscreen dry and then use a dry microfiber and all but scrub it out. I never had any issues with my microfiber and my windscreen until this addition.-Because of the added height, it shakes a bit a higher speeds and causes the windscreen to shake with it, this also makes it harder to see through the faster you go.-The adjustable bits seem pretty flimsy, but once locked in place it seems to stay put, for nowNow down to the real question, would I buy it again or recommend it to a friend? Absolutely. If you're looking for a solution without breaking the bank, this is it. I would just advise a word of caution, but at this price point, you really shouldn't be expecting anything less. It always blows my mind how people will spend 3 dollars on an item and expect it to perform like it's $90 alternative. I give it 5 stars because it does its job very well at deflecting wind, I took off a star for all the other bits that come with it.
james
Reviewed in the United States on December 5, 2020
Out of the box this shield is a piece of garbage- the hardware is plastic and easily falls out of place, leaving you with a floppy extra tall windshield. HOWEVER, with $8 worth of hardware you can turn it into a very sturdy piece of kit that reduces wind noise and buffering significantly.You’ll need 4x of each:10-32 x1in Thumb screwsM8 flat washers#10 flat washers#10 lock washers10-32 wing nuts.Remove the old plastic hardware by putting it in the unlocked position and then pulling out the locking mechanisms along their twisting axis. Then remove the plastic pieces they made with (just fiddle with it and you’ll figure it out). Replace the plastic hardware with the new metal hardware in this order:Thumb screw, m8 washer, #10 flat washer, #10 lockwasher, #10 wing nut.Once you’ve done this the shield should be solid as a rock! I am quite pleased with how well it works.
LoveLikeRockets
Reviewed in the United States on September 15, 2019
I have an 08 Kawasaki versys, a bike I believe this windshield is supposed to fit without issue. It took some work to make it fit. There's no instructions so everything is guess and test. That said, after about an hour, I had a very sturdy, well fitting, adjustable windscreen. I am 100% confident that it's going to stay in place, has had no issue at 80+mph, and does a good job reducing wind noise. Mine came from China, so I don't know how difficult returns would be, but a little fandangling and you can likely get it to fit on even an odd windshield like the old versys.I can't compare this windscreen to any other aftermarket screen because I've never bought one, but I am glad I bought this little guy. Does a great job and the price is fair
Steve V
Reviewed in Canada on September 13, 2019
Good product.
Recommended Products