Your cart is empty.
Your cart is empty. OXWIND 12V Adjustable ATV Motorcycle Heated Grips Motorbike Handle Heating Heater Bicycle Winter Motorcycle Accessories
Are You Afraid to Drive Your Motorcycle in Cold Weather? With this Motorcycle Handlebar Heater, All Problems Will be Solved. Fast Heating, the Motorcycle Heated Pad Only Takes 10 Seconds to Get Warm. The Large Heating Surface Cover All of Our Palm. Just Say ''NO'' to Frozen.
Package Contents:
1 x Heated Grips Covers with gear switch
1 x Double side glue 5 x Cable tie 1 x Stainless steel L bracket
Wiring Instruction
Black Cable Connect to the Negative Polarity of Battery.
Red Cable Connect to the Positive Polarity of Battery.
Note：(the lamp does not turn on when the connection is reversed, only heating)
Specification:
Input voltage: DC12V
Cable length: 108CM (heating film to switch), 146CM (switch to electric door lock)
Working temperature: -30°C---+100°C
Power: high-end 20W, mid-range 15W, low-end 10W
Material: composite fiber heating wire + Kevlar wear-resistant cloth, stainless steel(L bracket)
Installation method: 3M glue sticking and fixing, L bracket lens holder fixing
Instructions:
Power on: red light, blue light and green light each flash once and then go out
Standby: the red light is breathing and flashing, and the temperature reaches a certain temperature and it will automatically turn into a blue light
Working status: indicator light is always on (high-end: red light is always on, mid-range: blue light is always on, low-end, green light is always on)
Click on the key: switch gears
Note:
1. The positive and negative poles are connected reversely, the switch cannot be used, and the heating directly heats up.
2. Please select the appropriate gear according to the ambient temperature. Under low temperature conditions, if the temperature of the electric heating grip cover cannot be sensed in time due to the numbness of the hand, please use the low or medium gear first to prevent high temperature burns.
3. This product is only suitable for motorcycles with 12V battery. Please read the installation diagram carefully before installation. Incorrect wiring will cause damage to the components.
4. This product can only be installed on the handlebars of motorcycles when it is energized. You can use a battery to test whether the product is properly energized before installation.
5. It is strictly forbidden to energize and work when not riding (empty burn) to prevent the electric handle from being too high and damaging the original handle.
6. It is recommended to connect the electric door lock cable to the wiring. Most models have black positive pole and green negative pole. For specific conditions, it is recommended to use a multimeter to measure.
7. Please allow 1-3cm of size difference due to manual measurement.
chris
Reviewed in the United States on March 20, 2025
These are intended to operate at 5-7vdc, 12vdc they get way too hot.
Customer
Reviewed in the United States on January 26, 2025
Installed on a triumph scrambler 400x. Works great, blends in well / doesn't look like a flashy cheap add on.Only thing is that the low setting is more than enough to power through thick riding gloves. I think I'd only need to use the higher settings if I were wearing thick leather gloves.... Other than that its great.
Yoshi
Reviewed in the United States on April 14, 2025
Nice grip warmers. They are pretty easy to install and work quite well. They are really get very warm and work best with gloves. It can get hot with higher settings but overall works well.
Chicago773
Reviewed in the United States on December 9, 2024
The grips work great when both are working. One of the grips stopped working so I have to return for another set. The 6 customized settings are a bit confusing and there isn't much different to say there's a benefit of 6 settings over the standard 3 (low, med, high).
Mustang Guy
Reviewed in the United States on October 27, 2024
Winter is coming and these heated handgrips will be put to serious use on my Polaris Sportsman. They are about as close to plug and play as you can get. The only wiring is to connect the positive and negative wires to your power source (I connected directly to the battery). The grips attach easily with hook and loop fasteners and provide a pretty comfortable feel even when the heat is turned off. I started feeling the heat within 5 seconds of turning them on. There are 3 temperature settings, the hottest setting is pretty darned hot and even the coldest setting puts out nice heat. The switch has 3 light indicator colors: red, blue, green (high. Medium, low). Now I'm looking a little more forward to my winter winter rides. Would recommend.
Recommended Products
