Installation is simple but there are only 2 settings for mounting to table and in my case the anchor points didn’t extend deep enough beneath the table. Additionally the stand doesn’t fit 32inch monitors albeit the ones I have are wide screen but they’re also curved.

Holding my 3 32inch screens quite well. Very well made, and sturdy. It is a task to get them to line up exactly but it's do-able. Time and patience but very happy with the end result

This was working great for around 5 months. I had one 32" and two 27" monitors attached to it. In the last month I noticed all of the monitors started very slowly tilting downward. Then one day I went to plug in a DisplayPort cable in the back of one of the monitors, and they all just gave up at that point. All tilted down as far as they could go. I tightened every single connection including under the desk as tight as possible. Still happening. Now it can't hold up a single one.Edit - after a few days of posting this: I had someone much stronger than I take a look, and there was one screw behind the main vertical post that he was able to tighten more. Now it's back to working as it should! Just be aware that the screws do loosen over time and need to be re-tightened, possibly with a lot of force.

Easy to install and gave me my desk back and made the monitors much easier to read due to proximity

This is a very robust unit and works well for our 3 monitor setup.

Works great, are we able to get a replacement cable cover that was broke in the package.

I recently installed the **MOUNT PRO Triple Monitor Mount** on my desk, and it’s been an excellent addition to my workspace, especially for someone like me who uses multiple monitors for work. Here’s my detailed review of this **3-monitor desk mount** for screens up to **32 inches**, including the setup process, functionality, and performance.### **Design and Build**The first thing I noticed was how **sturdy** the entire mount is. The **heavy-duty construction** gives it a solid feel, and it’s clear that it’s built to handle larger monitors. Each arm can support up to **17.6 lbs**, which is plenty for most modern monitors up to **32 inches**. The entire mount is **black**, with a sleek and minimalist design that blends well with any desk setup. The material feels durable, and the arms have a high-quality finish that doesn’t look cheap or flimsy.The mount uses **VESA plates** for attaching the monitors, and it supports both **75x75mm** and **100x100mm** VESA configurations, which are standard for most monitors in the size range. I had no trouble mounting my monitors, and everything felt secure once installed.### **Full Motion Gas Spring Arms**One of the best features of this mount is the **full-motion gas spring arms**. Each monitor arm moves independently, allowing for full **tilt, swivel, and rotation**. The gas spring system makes adjusting the height and position of each monitor effortless. The motion is smooth, and I haven’t noticed any jerking or resistance when adjusting the arms.I love how I can position each monitor exactly where I need it. Whether I’m using them side by side in landscape mode or mixing in a **portrait orientation**, the **360-degree rotation** makes switching between different setups super easy. The **tilt adjustment** lets me angle the monitors for optimal viewing, which helps reduce eye strain when working for long hours.### **Easy Installation**The installation process was pretty straightforward, although it does take some time due to the complexity of the setup. Here’s a quick breakdown of my installation experience:1. **Mounting the Base**: The mount comes with a **C-clamp** or **grommet** installation option. I went with the **C-clamp** method because it seemed easier and didn’t require drilling any holes in my desk. The clamp felt very secure once tightened, and I was confident that it would hold the weight of three monitors.2. **Attaching the Monitors**: The **VESA plates** attach easily to the back of each monitor. I mounted the VESA plates to my monitors first and then attached them to the arms. The connection felt secure, and it’s easy to remove or adjust the monitors later if needed.3. **Gas Spring Adjustment**: After mounting the monitors, I had to adjust the **tension on the gas spring arms** to ensure the monitors stayed in place. The instructions included are helpful, and the tension adjustment only took a few minutes to get just right. Once the tension was set, the monitors stayed exactly where I positioned them without any sagging.### **Cable Management**One feature I appreciate is the **built-in cable management** system. The arms have cable clips that keep the wires neatly tucked away, which is a big plus for someone who hates having cables dangling all over the place. It keeps my desk looking clean and organized, with all the monitor cables running neatly along the arms. The cable management system isn’t overly complicated, but it does the job well.### **Adjustability and Ergonomics**The **height adjustability** and **flexibility** of this mount have been a game-changer for my workspace. I work long hours, and being able to position my monitors at the perfect height and angle has made a noticeable difference in reducing neck and eye strain. The ability to move the monitors up, down, side to side, and even rotate them has been invaluable for maintaining good posture and ensuring I’m comfortable throughout the day.The **gas spring** mechanism allows for **dynamic adjustments**, so if I want to stand up while working or quickly reposition a monitor, it’s easy to do without any hassle. This level of adjustability makes it perfect for both seated and standing desk setups.### **Stability and Performance**Once everything was installed and adjusted, the mount has been extremely stable. There’s no wobbling, even when I’m typing or moving the desk slightly. The **heavy-duty construction** really shines here, as it holds all three monitors securely in place, even when I’m adjusting their positions throughout the day.I’ve had no issues with the arms sagging over time, which is a common concern with cheaper mounts. The **gas spring arms** provide consistent support, and once they’re set in place, they hold firmly. Each arm can handle monitors up to **17.6 lbs**, which is more than enough for the 27-32 inch range of most modern monitors.### **Pros**- **Full motion gas spring arms**: Smooth and easy to adjust, with tilt, swivel, and rotation for maximum flexibility.- **Heavy-duty construction**: Stable and sturdy, able to hold three monitors securely without wobbling.- **Easy installation**: The C-clamp or grommet mount is simple to install, and the VESA plates make attaching monitors quick and easy.- **Cable management system**: Keeps wires organized and out of sight, which helps maintain a clean, clutter-free workspace.- **Ergonomic benefits**: The height adjustability and full range of motion help reduce neck and eye strain.- **Supports large monitors**: Can hold monitors up to **32 inches** and **17.6 lbs each**, making it versatile for a range of setups.### **Cons**- **Assembly time**: While the installation isn’t difficult, it does take some time to set up, especially with adjusting the tension on the gas springs.- **Limited desk compatibility**: If your desk doesn’t have enough depth or a solid surface for the C-clamp or grommet installation, you may need to explore alternative mounting solutions.- **Tension adjustments needed**: You’ll need to spend some time adjusting the tension on each arm to get the monitors to stay in place correctly. This isn’t a dealbreaker but requires a bit of patience.### **Final Thoughts**The **MOUNT PRO Triple Monitor Mount** is an outstanding investment for anyone looking to improve their workspace with a multi-monitor setup. The **full-motion gas spring arms** provide smooth, easy adjustments, and the heavy-duty construction ensures stability and durability. It’s perfect for professionals who need multiple monitors for work, gaming setups, or anyone looking to free up desk space while enjoying ergonomic benefits.Though it takes a bit of time to assemble, the flexibility and convenience of being able to position your monitors exactly where you want them make it well worth the effort. I highly recommend this monitor mount for anyone with a **three-monitor setup** who values both **functionality** and **quality**.

I purchased this as an upgrade to my existing monitor arms for my desk at work as I wanted the ability to orientate monitors differently, which the gas arms allowed over the fixed arms in typical mounts.Not only is this mount high quality and easy to assemble/setup, it has cable management arms which makes for a cleaner looking setup.What makes this even better, is I originally mounted this using the included grommet mount, putting the clamp style mount to the side for future use when I get a different desk. Unfortunately, I either misplaced the clamp style, or it got thrown away by someone on accident. When I reached out to OHOPE asking if there was a way to purchase the clamp style kit separately, they quickly responded letting me know they were going to send me the replacement free of charge!

I've never had more than one monitor in my life. I've never had 3 until recently when i purchased my first gaming/work setup. I wanted to mount because Acer monitors have a red base and i didn't want them to ruin the theme i had in mind. I also needed a vertical monitor for chats like discord, messenger, and my jobs team chat. The mount was easy to put together. I lost the instructions and was so relieved to find that they are on Amazon with the listing. Saved my butt. There are multiple different ways to mount, and it is best to have 2 people when putting this together. All in all, i am super satisfied. They don't fall, or move on their own if tightened well enough. I move them around all the time when I'm resting or gaming or working and they are SO easy to move. I would give this product 10 stars if i could! If you are nervous or having doubt, don't. BUY THIS.

Installation was done drilling a hole in my desk vs. clamping it in on the back of the desk. They are easily adjustable and installation was simple. They are very sturdy and well designed.I’m giving it 4 stars because the screws for the back of the monitors were too short to use the spacers AND washers. On my curved monitors, I needed to use spacers (provided with the mount) between the curved back of my monitor and the flat mounting bracket. So I had to leave the washers off to have enough thread to mount it. I would still recommend them.

Am working from home. Have a Monitor and a laptop (which is already on an adaptor for such a stand). This item replaces my old 2 stand, as I needed an extra monitor.Sofar I am happy with this product!

Installation took me 1-1.5 hours. Instructions were easy to follow, all the parts were there. I drilled a hole through my desk, and once that was done, it went quickly. I had help opening the arms as well as a few other items. The cord management was easy, I found the arrow on the inside of the plastic pieces pointing toward the monitor mount at the end slipped on and off the easiest. I have Dell and Asus 1920 x 1200 and an Asus 2560 x 1440 and there is plenty of room for the arrangement I have.Beware, I have a Asus ProArt PA248QV and there is a hole right above the upper right VESA plate corner and a mounting screw fell in. Of course it did!! it took well over an hour to get out (not included in the install time). A small magnet taped to a wire did the trick. In my case, the monitor was not effected.