Shopping Cart

Your cart is empty.

Your cart is empty.

Nady MM-14FX 4-Channel Microphone Mixer with integrated echo effect – ¼” Inputs & output – Delay time & Depth controls

Free shipping on orders over $29.99

$43.99

$ 18 .99 $18.99

In Stock

1.Style:Mixer


About this item

  • 4 mono 1/4" Microphone Inputs with individual volume controls mixed to one single 1/4" line level output.this mixer is not a stand-alone device, it should be connected to the amplifier
  • Compact design with a heavy-duty steel construction, smooth-turn ultra-stable pots, and high-quality jacks for lasting durability
  • The mixer delivers high-quality audio with up to 50dB of gain per channel, low distortion, a high signal-to-noise ratio, and a wide frequency response to bring out all of the details in your audio
  • Decay time and depth control knobs let you adjust the built-in echo DSP to simulate the decay reverb of rooms, halls, and stadiums
  • The front panel has an on/off switch with an indicator LED. The mixer can operate on a 9V battery, or via an optional external AC/DC adapter for terrific versatility
  • Though it can be used in many applications, the MM-14FX is designed for use with dynamic microphones. If using otherwise, please be aware that significant volume increases may incur some signal distortion.


Mix up to 4 microphones together and add echo with this high-quality, compact and durable audio mixer

The MM-14FX by Nady Systems is a great mini mixer for dynamic microphones. Versatile and highly portable, this little workhorse features four mono ¼” microphone inputs with individual volume controls, plus built-in echo effects DSP with delay time and depth controls for the ultimate mixing effects. Although small in size, the MM-14FX provides up to 50dB of gain per channel with low distortion, a high signal-to-noise ratio, and a wide frequency response to deliver all of the details in your audio.

Connect the ¼” unbalanced output directly to your PA or recording device for ultra-clean audio. Karaoke, performances, recording, presentations, classes, the applications are endless… The MM-14FX is a perfect front-end solution wherever there is a need for dynamic microphones. Eliminate the need for bulkier, more expensive mixers, and take the MM-14FX anywhere with you with its 9VDC operation using either a 9V alkaline battery or the optional PAD-1 AC/DC external adapter.

Specifications
Input Impedance: 5kΩ
Maximum Input: -13dBm
Sensitivity: -45dBm
Output Impedance: 800Ω
Maximum Output: +6.5dBm
Max Gain: 49.1dB
Frequency Response: 20Hz – 18kHz (±3dB)
THD + Noise: 0.09%
S/N: -78dB
Noise Floor: 300uV
Current Drain: 35mA
9V Battery Life: up to 20 hours
Power Requirements: 9V battery or optional PAD-1 AC/DC adapter


Lenardo
Reviewed in the United Arab Emirates on April 18, 2025
Good product along with the best price.
Ohrschpliten Lautenboomer
Reviewed in the United States on November 5, 2021
I definitely like the separate volume knobs, I run this a mixer and into powered speakers, so overall volume is not a problem.What I really wanted was the delay, using a slight delay (sort of an echo) and a touch of reverb from my mixer, I get the sound that I have been trying to achieve.Bravo to NADY...!
Jerry Cobbs
Reviewed in the United States on January 27, 2020
The first thing I noticed is this thing has a lot of gain--50db. If you don't use it for anything else it makes a good preamp. I also have the version without the echo/delay, which only has 20 db, and this is noticeably more sensitive. Battery life seems good on both. One thing I really wish it had is a master volume control. Not sure why it doesn't when the non-effects version does. The echo/delay is OK, pretty typical of most low-end mixer effects these days. I miss good old-fashioned reverb but I guess that's a thing of the past. If you want more effects you can always feed this through a pedal or processor. The knobs seem a little more delicate than the non-effects model, but I don't bang my stuff around so I don't think it's a problem. For the price, it's a decent basic mixer. Pair it with a battery powered amp like a Mugig BM25 and you've got a nice little busking setup that doesn't require a wall outlet.
Jean-Philippe O.
Reviewed in Canada on January 2, 2020
This device didn't worked at all. The batterie melted in it under a minute. Tried different thing to make it work. Maybe it work with an adapter but it was not included. Can still work as paper weight or hipster conversion project.
Marc Diaz
Reviewed in the United States on May 17, 2019
If you are looking for a FULLY portable mixer with minimal functionality, this is it !!You can power it up with an AC Adapter (I don't think it ships with one) or.... you can power it up with a 9V battery, which is how I always use it. It's a four channel mixer with 1/4" jacks on the back side. It works very well.If you are using wireless microphones (that have 1/4" microphones) they will plug right into the mixer. This is how I usually use it.No complaints. Priced well, but with great performance. I don't use the echo effects. So I cannot comment on that.
Jose Alfredo Jiménez Ramírez
Reviewed in Mexico on April 5, 2019
Muy buena fidelidad
Marie Neige
Reviewed in Canada on June 14, 2018
Excellent! I use this for my 4 last musics shows as street musician and it's perfect. I still use the same 9v battery since I buy it so It give me more than 20 hours and the battery seem still good for an other 20h.
TRUE ARTIST
Reviewed in the United States on July 19, 2017
Battery powered volume mixing and Reverb which I run off of 9 volt rechargeable battery 400mh into an art dual preamp(battery powered) into my Behringer mpa40bt PA system input (battery powered). I use 1 for mics I'll be getting a second one for guitars / instruments. The sound when using this compared to not using this is so much better when you use this adding A little reverb, volume controls on each channel and getting multiple mics or guitars into the 1 pa system is Amazing. We did not even set up or power on are three additional acousticsonic amps we had in a room about the size of a 3 car garage. also chaining things how I did no volumes went above 4 out of 10 on anything from Guitar to mixer to preamp to input to master volume. No hiss no humm no issues. Ran 3 hours straight battery lasted no issue on mixer pre amp and pa. Pa still read 100% it hadn't dropped a 75% yet even on scale. If you're running vocals through a mic to a PA system and don't have any Reverb this is for you also if you would like to run up to 4 mics into your PA / input Channel this is for you.
Sonny
Reviewed in the United States on May 9, 2017
Mine arrived DOA. I figured I'd be safe buying a used one... Nah. Good news is that I build amps and effects for fun. I bought this for the reverb and mixing, I'm basically using it as a 4 way switcher for my guitars.Anywho's, the problem with MY unit was a bad diode, D1 to be exact. It was open. Soldered in a new diode and LED and all is well.You don't HAVE to buy the optional power adapter, but I'll leave all the alternative options up to you, mine works with a standard guitar pedal board power supply.The noise floor is very high (hiss) but can be compensated for with amp settings, but I'm going to look for a permanent fix. Make sure your ground wire housing connection has a true metal contact.The reverb is fun, very different from my guitar reverbs, but is still a nice effect for $25 plus a mixer.
Nmar
Reviewed in Canada on May 12, 2017
Very good mixer. It just one of the dial is kinda loose but still works perfectly. no humming/buzzing or anything. I haven't tried it yet with the power supply only with the 9V battery. Make sure you use a good quality stereo audio cable or adapter or it will have static. I tried the dollor store audio cable and it wasn't good but switch it with something solid and you will have a nice mixer.I just wish i can isolate or turn off/on the echo effects on each Channel. cause sometimes i dont want to use the effects on one channel but want the other channel to have echo effects.
MrPotatoHead
Reviewed in the United States on October 5, 2017
Cheap, does the job, good quality sound. Can't use for recording, output level is too high.
Annamarie
Reviewed in the United States on November 29, 2016
I purchased this less than 4 months ago - used it 3x and kept stored in orignal box for protection. Getting ready to use tonight and it no longer works with new battery &/or multiple adapters tried.
H B
Reviewed in the United States on October 27, 2015
There's always someone, who got to have received a bad unit, and in this case, it is me.The unit itself seemed ok, sturdy made, good enough for what it is.I initially bought it for an amplifier at home I have, to add some reverb to the voice, but the unit only produced a loud buzz on one channel!I even tried with headphones, and the same thing, just a buzz, no audio.I thank Amazon for the easy return prolicy!