Shopping Cart

Your cart is empty.

Your cart is empty.

NanoVNA-H4 Vector Network Analyzer 10KHz-1.5GHz Shortwave MF HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart with 4' LCD Touch Screen

Free shipping on orders over $29.99

$79.70

$ 38 .99 $38.99

In Stock
  • 【Large Screen and Large Battery】The antenna analyzer is equipped with a 4-inch full-view LCD screen, which adds DC dimming, making observation clearer and more comfortable; It is powered by a 1950mAh battery and can be used for more than 8 hours.
  • 【Increase Frequency and Improve Accuracy】The antenna analyzer ham radio makes full use of the odd harmonic expansion of si5351 to support the measurement frequency up to 1.5GHz; Increases the metal shielding sheet to reduce external interference to improve measurement accuracy; Optimizes the power management circuit to reduce the power supply noise, reduce USB power interference.
  • 【DIY Expansion and Antenna Performance】Reserve UART, PC14, PC15 ports for easy DIY expansion. The main function of the default firmware is for antenna performance measurement. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring.
  • 【PC Connection】Use PC software NanoVNASaver to connect to vector network analyzer h4, display the data of various radio design and simulation software on the computer, and save it to the Touchstone file.
  • 【Exquisite Packaging and After-sales Service】Exquisite packaging, complete vector network analyzer kits, light and portable, safe and reliable transportation. The new ABS shell can effectively protect the machine. If you have any questions or problems, please feel free to contact us via Amazon news or email, we will serve you as soon as possible.



Product Description

4.0“ NanoVNA-H4

NanoVNA-H4 Vector Network Analyzer 10KHz-1.5GHz Shortwave MF HF VHF UHF Antenna Analyzer Measuring S Parameters,Voltage SWR,Phase,Delay,Smith Chart

● ABS shell: 75mm x 133mm x 18mm(excluding protrusions)

● Measuring frequency: 10KHz ~1.5GHz

● RF output: 0dbm (±2dB,fundamental wave)

● Frequency accuracy: <2ppm

● Frequency stability: <0.5ppm

● Measurement range: 70dB(50kHz-300 MHz), 60dB (300M-900MHz), 40dB (0.9G-1.5GHz) enable extendedfirmware

(When using harmonic measurement,you need to pay attention to the error caused by the fundamental nonlineartransformation)

● Port SWR: <1.1

● Display: 3.95" TFT (320 x480)

● USB interface: USB type-Ccommunication mode: CDC (serial)

● Power supply: USB 5V 200mA,built-in 1950mAh battery, maximum charging current 1A

● Number of calibration points:101 (fixed)

● Number of scanning points: 101(fixed)

● Display tracking: 4, mark: 4,setting save: 5

Wide Application

Package List
What can you get ?

1X NanoVNA-H4 (with 1950mAh battery)

1X USB Type-C data cable

1X Type-C To Type-C cable

2X 15cm SMA male to male RG316 RF cable

1X SMA male calibration kit - OPEN 1X SMA male calibration kit - SHORT 1X SMA male calibration kit - LOAD 1X Black Touchscreen Pen

1x Stylus

HF VHF UHF Antenna Analyzer Measuring

This Antenna Analyzer is a DIY product that provides perfect vector network measurement capabilities, tiny and handheld,light and convenient, easy to use and carry,long service life.The default firmware main function is used for antenna performance measurement. The TX/RX method can measure the complete S11 and S21 parameters (you need to manually replace the transceiver port wiring).

  • Measuring S-Parameter, Voltage Standing Wave Ratio, Phase, delay, Smith Chart

4.0" LCD Touch Screen

4inch LCD Touch Screen

Nanovna-H Vector Network Analyzer with Large 4inch LCD touch screen;

Nanovna-h4 10khz to 1.5ghz Vector Network Analyzer can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics.

PC Connection

Type-C Rechargeable & Support PC Software Control

Built-in 1950mAh lithium battery, standby time up to 7 hours,also could be USB powered which can last longer working time.

Support Windows and LINUX Computer Control.

Using PC software NanoVNASaver, it can connect to a NanoVNA and extracts the data for display on a computer, and for saving to Touchstone files. We can export Touchstone (snp) files for various radio design and simulation software through PC software.

MF/HF/VHF/UHF Applicable

MF/HF/VHF/UHF Applicable

It's very useful as an antenna analyzer for your ham station.Network analyzer High stability, high sensitivity, high accuracy,greatly enhanced performance in all aspects.Which can measure S-parameter, voltage standing wave ratio SWR, phase map, group delay, Smith chart and so on.Ideal for every ham radio user.

Android Connection

Connect to Android Phones

Compatible with most Android mobile phones.

It supports time domain analysis function (TDR), and more convenient to connect to mobile phones.

Main Screen Menu

Main Screen Menu

Main Screen1.START 2.STOP frequency 3.Marker4.Calibration status 5.Reference position 6.Marker status7.Trace status 8.Battery status 9.CENTER frequency 10.Span

Menu Screen11.Menu

Keypad Screen12.Numeric keys 13.Back key 14.Unit key 15.Input field

ABS Shell

ABS Case

The 4.0inch Touch Screen Vector Network Analyzer Kit could be protected with a ABS shell. Preventing damage to parts,more accurate, and simple. And save your printing money.


Jon C.
Reviewed in the United States on May 10, 2022
Touch screen completely stopped working after just 1 day of use.
David D.
Reviewed in the United States on August 22, 2021
Touch screen sucks, however it works great for making and testing antennas. The stylus is like a hard guitar pick, and is far easier than using your finger. There are also buttons on top that you can use to navigate the menus.
P. Mackie
Reviewed in the United States on July 28, 2021
Where is the User Manual and the Windows a;pp software?
miker
Reviewed in the United States on March 6, 2021
This thing is awesome, especially for the price. I'm using as a ham antenna analyzer, and it works great for all the bands!
Gerardo Peña Burbano
Reviewed in the United States on December 20, 2021
Para uso de radioaficionados un producto muy bueno
Frank R. Allen
Reviewed in the United States on November 18, 2021
Nicely done and easy to use. Little hard to understand sometimes, but the numerous videos on Youtube make it an enjoyable experience. I've been a Ham and building my own antenna, mostly wire, for 49 years. I have and use a RigExpert, which I enjoy, especially while climbing towers and trees. But the understanding I have gotten from the nanoVna has made the theory so much more easy to understand. Well done.
Ed C
Reviewed in the United States on November 11, 2021
Touch screen stopped working after a few days of use. Said that there is no quality in products today,
Todds Books
Reviewed in the United States on April 20, 2021
This is one of those gadgets you didn't know that you needed until you got one. Seriously though, the NanoVNA H4 is an antenna analyzer (and much more) for anyone dealing with hobby-level radio communications. I have not used this type of analyzer before, but after watching YouTube channels, particularly Alan Wolke's (W2AEW), I knew I wanted to get one. I have an antenna analyzer that I bought several years ago from a major amateur radio equipment manufacturer, and it works well for finding SWR and other measurements related to antennas for amateur radio, particularly HF. The unit costs around $250 ($350 if you want UHF). It's bulky and runs on 8 batteries. Now comes the Nano VNA for well under $100, it is rechargeable, fits in your shirt pocket, and has applications way beyond checking antenna and radio impedance matching, although it serves that purpose extremely well. I just received the unit and am exploring its functions, so I can't say more yet, but it is well worth the money if you just want to check the impedance match between your radio and your antenna!