Your cart is empty.
Your cart is empty.LOCKCRAFT #LS17041 REPLACEMENT LOCKSET FOR FORD / LINCOLN Attention: If your car require transponder (Chip) keys this set as it is will not start your car and the supplied keys will need to be duplicate to transponder chipped keys and programmed to your car by local automotive locksmith or the dealer. Ford Excursion 2000-2005 Ford Expedition 1998-2005 Ford Explorer 2-Doors 2001-2003 Ford Explorer Sport Trac 2001-2007 Ford F-150 1997-2003 Ford F-250 1997-2007 Ford F-350 1997-2007 Ford Freestar 2004-2007 Ford Windstar 1999-2003 Lincoln Blackwood 2002 Lincoln Navigator 1998-2005 Fit Models Listed In My Compatibility List Above. 1(ONE) NEW IGNITION SWITCH CYLINDER + 2 (PAIR) FRONT DOOR LOCK CYLINDERS + 2 FORD OEM OVAL LOGO KEYS TO MATCH SET Attention: If your car require transponder (Chip) keys this set as it is will not start your car and the supplied keys will need to be duplicate to transponder chipped keys and programmed to your car by local automotive locksmith or the dealer. Avoid high repair costs from your local dealer and repair it yourself. I'm certified locksmith and replace those many times and if you have any questions concerning this product or other lock needs do not hesitate to email me.
David
Reviewed in the United States on August 31, 2024
Perfect replacements. Install jist like factory and feel like factory locks. All locks and ignition match to one key like OEM. Ford logo on key is a nice touch.
Reviewer
Reviewed in the United States on August 2, 2024
Replacing the locks were much easier than I expected.Getting keys reprogrammed to the truck's computer could be a locksmith hassle. You'll need to find a locksmith who can transfer old key codes to the new keys.
Mr. Burns
Reviewed in the United States on December 8, 2024
It's apparently hit or miss on what you get.I've ordered these 6 times and every time they are different.First off, they are all Chinese reproductions (fakes)The description says and shows 2 cylinders, 2 keys, 2 washers, 1 ignition, 1 key chain.of the 6 ordered, I've only gotten 3 key chains,sometimes the key chain is durable with a thick mounting hole , other times it has a thinner hole and just breaks off the key ring anyway.the production quality is different every time,3 times it's missing the washers,1 was defective and the ignition tumbler literally fell out of the cylinder,1 the electronic connector kept falling off.and half the time the plastic adapter on the end of the door cylinder is different and sometimes not compatible, or just cheap plastic that breaks.and 1 time the plastic around the ignition cylinder kept falling off.All I can say is "buyer beware"
Cokeman
Reviewed in the United States on August 21, 2023
Fixed worn out ignition on 02 F250. I only have a driver's lock and tailgate lock, but these are all the same cylinders. Just take the clips off the passenger cylinder and put the tailgate tab on it. Now I have a new ignition and all matching locks for less than rekeying.
J. Albers
Reviewed in the United States on November 17, 2022
Once I found some videos online (one in particular), this installation was very easy. In fact the ignition lock cylinder was installed in less than a minute, once you know the trick on my 2005 F-350. The door locks took at least half an hour each but very straight forward once you know a few tricks.
Kyle
Reviewed in the United States on June 18, 2021
So at first I thought I ordered the kit that had the tailgate cylinder too but I was wrong, so pay attention to that, this doesn't come with it. That's on me!But the plastic claws that are on the back of the cylinders weren't the correct ones for my truck so I had to reuse my old ones, easy swap no issue.The ignition cylinder is working perfectly but sticks out further then the original. I don't like the look, but it works flawlessly.Other then that, good kit for the price
Don
Reviewed in the United States on October 25, 2019
I just installed this set in my 2002 F250. The ignition took me about 5 minutes and 15 seconds. 5 minutes to jiggle my key enough to get it to finally turn and 15 seconds once it actually did to take out and install the new keyed switch. Very simple install and YT has plenty of examples to watch for both the ignition and doors. Doors are a bit more involved due to taking the door panels off but I would give them a 2 on a scale of 1-5 rating on how difficult they are for the average do it yourself individual with some experience doing interior vehicle work. Just be extra cautious not to scratch your door paint on removal. Both doors from start to finish took approximately 40 minutes to complete.They were here fast, easy to install and so far work exactly as advertised.
L&S
Reviewed in the United States on October 16, 2018
Needed new door locks and wanted the doors and ignition to be matched. Very happy with this product, it fits and functions as if OEM. Used a couple of YouTube videos to get a good understanding of the process and ignition took less than 5 minutes.Doors are a bit more involved and took about 30 min each, but part of that time included replacing the electric door lock actuators as well since I was in there and they were also not working.Bottom line, a good solid product, fits well, works well, you will be happy you chose this one.
Recommended Products
$28.95
$ 14 .99 $14.99