Your cart is empty.
Your cart is empty.Product Description
Continuing the legacy of Noctua’s classic NH-U-series, which has received more than a thousand awards and recommendations from international hardware websites and magazines, the NH-U14S has become a benchmark for high-end 140mm single tower coolers. The TR4-SP3 version is a tailored custom model for AMD’s sTRX4/TR4/SP3 platform (Ryzen Threadripper / Epyc) and features a larger contact surface as well as the latest SecuFirm2 mounting system for socket sTRX4/TR4/SP3. Topped off with the renowned quiet NF-A15 PWM 140mm fan and Noctua’s proven NT-H1 thermal compound, the NH-U14S TR4-SP3 forms a complete premium-quality solution that combines maximum performance and superb acoustics for enthusiast-grade sTRX4/TR4/SP3 systems.
140mm size for maximum performance
With six heatpipes, a fin surface area of more than 6000cm² and the large NF-A15 140mm fan, the NH-U14S TR4-SP3 provides a superior level of cooling performance that makes it ideal for the most high-end, enthusiast-grade sTRX4/TR4/SP3 systems.
SecuFirm2 mounting system for sTRX4/TR4/SP3
Noctua’s SecuFirm2 mounting systems have become synonymous with quality, safety and ease of use. The TR4-SP3 variant has been completely custom-designed for the new socket and is particularly easy to install: Put on the heatsink, fix the four spring-loaded screws and you’re done!
Offset mounting options for better PCIe clearance
In order to assure optimal compatibility with SLI and CrossFire multi-GPU setups, the SecuFirm2 mounting for sTRX4/TR4/SP3 makes it possible to offset the cooler by 3 or 6mm towards the upper edge of the motherboard, thereby increasing clearance of the top PCIe slot.
NF-A15 140mm premium fan
Built with Noctua’s AAO standard and sophisticated aerodynamic design measures, the NF-A15 has built up a reputation as one of the best 140mm heatsink fans on the market.
Measurements
- Height (without fan): 165 mm
- Width (without fan): 150 mm
- Depth (without fan): 52 mm
- Height (with fan): 165 mm
- Width (with fan): 150 mm
- Depth (with fan): 78 mm
- Weight (without fan): 865 g
- Weight (with fan/s): 1030 g
Materials
Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating
Cooler Specification
Socket compatibility
This cooler is only compatible with AMD sTRX4/TR4/SP3, and cannot be used on any other sockets and is incompatible with Noctua’s standard mounting kits.
Scope of delivery
- NF-A15 PWM premium fan
- NA-RC7 Low-Noise Adaptor (L.N.A)
- NT-H1 high-grade thermal compound
- SecuFirm2 sTRX4/TR4/SP3 mounting kit
- Anti-vibration pads and fan-clips for second NF-A15
- Noctua metal case-badge
Customised for AMD sTRX4/TR4/SP3
Please note that the NH-U14S TR4-SP3 is a dedicated version for the AMD sTRX4/TR4/SP3 socket. Due to its customised larger base, it cannot be used on any other sockets and is incompatible with Noctua’s standard mounting kits.
Rév O'Conner
Reviewed in India on March 6, 2023
I live in a hot place and so far using water cooling, I had to underclock my threadripper 3960x so as not to overheat it. Not anymore. The inbuilt thermal paste is also good enough. Really silent, great product 10/10.Note: Wear a glove while mounting, the fins are sharp, I nicked my hand on it.
Carlos BISTAFA
Reviewed in Japan on February 20, 2023
I did not want to deal with water cooling anymore and found the Noctua NH-U14S TR4-SP3 to be one of the best options available for TR4 sockets. One month of usage and had no troubles with my 1920x.
technobrat
Reviewed in the United States on November 10, 2023
The media could not be loaded.
DenRotenFadenFinden
Reviewed in Germany on August 5, 2022
Sowas ist man gar nicht mehr gewohnt bei Computerteilen. Eine in lesbarer Grösse gedruckte und perfekt illustriert Anleitung in der der Einbau genau erklärt wird.Mir war die Wasserkühlung meines PCs kaputt gegangen und ich wollte wieder mit Luft kühlen.Und das tut es jetzt auch, und zwar leiser (!) als die Wasserkühlung war. Der Lüfter ist zwar nicht billig aber definitiv oberste Qualität. Die Laufruhe ist grossartig. Der Einbau war wirklich supereinfach und toll erklärt und alles was man braucht (inklusive Wärmeleitpaste und Imbus für die Schrauben)) ist beim Produkt dabei.Die Kühlleistung auf dem Threadripper 2950X ist Ok. Im idle ca. 41 Grad. Unter Vollast wenn alle 16 Kerne dauerhaft 100% rechnen ist die Temperatur allerdings auf 62 Grad, so dass ich mir noch den Zusatzlüfter NF-A15 dazu bestelle, der laut Rezension nochmal -5 Grad bringt.Nach ausgiebigem Gebrauch: die Laufruhe ist immer noch sensationell (wobei mein gesamter Tower auf leise getrimmt ist). Das System ist definitiv viel angenehmer als mit der vorher eingebauten Enermax Wasserkühlung (die ich leider niemandem empfehlen kann, die war nach noch nicht mal 3 Jahren defekt.)Update: gerade den Zusatzlüfter verbaut. Tipp: darauf achten in welche Richtung der Luftstrom im rechner fliessen muss und den Lüfter entsprechend der Richtung konfigurieren und einsetzen. Hatte ihn zuerst falsch rum eingesetzt weil kein Hinweis in der Anleitung dazu ist.Wenn alles richtig ist gibt es ungefähr die versprochene Kühlung um zusätzliche 5 Grad, bei mir sind es 4 Grad-- und das flüsterleise.Unter Vollast bleibt das System jetzt immer deutlich unter 60 Grad trotz Übertaktung. Im idle ist die Temperatur unter 40 Grad . Perfekt.
comrade
Reviewed in the United States on June 8, 2020
Very easy to install. I didn't know until I got it that you can get one with a second fan. I'm ordering that for my computer as the Threadrippers runs even warmer than I thought it would. Make sure you have good airflow in the case! It works very well at stock speeds and maybe a mild overclock, but beyond that, unless you have a way to keep your computer room very cool, it will get warm. I tried the 3960x with a liquid cooler at first, but although it kept it below the throttling speed, it was getting quite warm. The standard water coolers just don't cover enough of the cpu to keep it cool.Putting it in was very easy. Cleared the memory on my Gigabyte Aorus Wifi Pro MB with no problem, but I only have four sticks of ram. If I had more, it would have hit the top of the sticks closest to the cpu and wouldn't fit. If you are planning on using more than four sticks, they had better be very low profile. Your MB may be different and have more spacing though. It cleared my video card which is in the first slot by at least 6 mm, although there is an adjustment to move it up to 6 mm higher up in the case if needed.Heatsink seems to be solid and very well made. It's tall, so check your clearance with the side of the case. I've got an old Cooler Master HAF 932 case and have four fans mounted on the side, and it still cleared with plenty of room. Even though it came with only one fan, it includes clips for a second one and a tube of thermal paste. It also comes with a short cable you can attach to the second fan to keep it at about 1200 RPM for quietness. I don't think the second fan will add that much extra noise as they are rather quiet fans and are 140 mm. They come with extra rubber isolation pads to keep the fan from vibrating against the cooler.All in all, a good product for a fair price, (considering what everything costs these days). Amazon shipping is also very quick, even without paying extra for faster shipping. I ordered it on a Wednesday evening, and it arrived on Friday about noon. I live near a large city, so your mileage may vary!
Abel G.
Reviewed in Spain on May 23, 2020
Excelente producto, lo uso con un threadripper 2970wx con 250w de tdp y sin problema aunque es su tope de disipación, al 2990wx debería ir igual de bien al tener el mismo tdp.Importante:No confundir tr4 con am4, yo la lié y compre otro...La caja tiene que ser de las anchas o no entra.Lo tengo a tope de ram siendo alta y tocaba con ellas el ventilador.y tuve que desplazarlo un par de cm y queda justo rozando la carcasa.Se le puede poner un ventilador adicional.Muy silencioso, a tope de rpm y a penas se escucha.Una la mejor elección si el resto de aspectos acompañan.
Avilix
Reviewed in Mexico on January 20, 2020
Estuve revisando diferentes comparativas de aircooler y este era el que mejor enfriaba. Efectivamente, incluso con Render en Arnold las temperaturas se mantienen en los 67 C y de ahí no sube. Creo que hasta es mejor enfiramento que un water 360mm. Tiene la opción de comprar otro ventilador. Espero sirva para los nuevos threadripper 3970
Recommended Products