Product description

120V/12V Magnetic Transformer, Rated for 75W. Nora Lighting's series of 4" low voltage remodel housings provides crisp, defined MR16 quartz halogen illumination to any existing drywall ceiling with no above access. Airtight option offers energy savings by reducing the flow of air through the ceiling. A wide variety of attractive adjustable trims allows fine-tuned aiming of direction light sources. Transformer:. Input: 120V. Type: Magnetic. Output: 12V 75W. Air Tight (AT): Available with air-tight housings that include a pre-installed gasket to restrict airflow from room into ceiling plenum. Minimum Clearances: Non-IC housings require a minimum clearance of 3" from thermal insulation and 1/2" from adjacent building components. Ceiling Thickness: Ceiling thickness varies from 5/8" - 1-3/8". Lamp Adjustment: Circular bracket on low voltage trims provides a secure snap-in hold and friction-locked aiming adjustment. UV/Shatter Guard Shield: All low voltage trims include a tempered UV/shatter shield. Installation: High tension tempered steel springs secure remodel housings evenly to ceiling; hole cutout template provided for convenience. Junction Box: Junction box is listed for through branch circuit wiring and contains six 1/2" knockouts and four Romex pryouts with strain relief. Dimming: Use magnetic low voltage dimming control with magnetic transformer or electronic low voltage dimming control with electronic transformer. Electrical: Quick Connector provided. Wattage: 75W. Lamp: 12V MR16. Dimensions:. Length: 14-1/2". Width: 4-7/8". Depth: 6-3/8". Ceiling Opening: 4-3/8". Listing:. cULus Damp Location with Feed Through. cULus Wet Location (Only with designated trims). Washington State Approved (AT Only). Meets or exceeds ASTM-283 Air-Tight (AT Only).

From the Manufacturer

Light Bulb:(1)75w MR16 GU5.3 12v Halogen Nora Lighting’s series of 4' low voltage remodel housings provides crisp, defined MR16 quartz halogen illumination to any existing drywall ceiling with no above access. Airtight option offers energy savings by reducing the flow of air through the ceiling. A wide variety of attractive adjustable trims allows fine-tuned aiming of direction light sources. Transformer: 120V/12V 75 watt magnetic. Minimum Clearances: Non-IC housings require minimum clearances of 3' from thermal insulation and 1/2' from adjacent building components. Ceiling Thickness: Ceiling thickness varies from 3/8' – 1-3/8'. Lamp Adjustment: Circular bracket on low voltage trims provides a secure snap-in hold and friction-locked aiming adjustment. UV/Shatter Guard Shield: All low voltage trims include a tempered UV/shatter shield. Dimming: Use only magnetic low voltage dimming control. Installation: High tension tempered steel springs secure remodel housings evenly to ceiling; hole cutout template provided for convenience. Junction Box: Contains two 3/4', three 1/2' knockouts and four Romex pryouts with strain relief. Electrical