Your cart is empty.
Your cart is empty. SPECIFICATIONS: 12 Volt, CCW, 8-Tooth Pinion
UNIT TYPE: United Technologies PMDD
DESIGN: PMDD
VOLTAGE: 12
ROTATION: CCW
NUMBER OF TEETH: 8
REPLACEMENT FOR or COMPATIBLE WITH JOHNSON:
235TXL 82-82
235TX 80-85
235TRX 83-83
235TRL 83-83
235TL 80-85
235STL 84-85
225TX 86-87
225TL 86-87
225PX 87-87
225PTX 86-86
225PTL 86-86
225PL 87-87
225CX 87-87
225CL 87-87
225 (Older Models) 77-79
200TXL 82-82
200TX 80-81
200TRX 83-83
200TRL 83-83
200TL 80-82
200STL 86-87
200 (Older Models) 77-79
185TX 84-85
185TL 84-85
175TXL 82-82
175TX 80-91
175TRX 83-83
175TRL 83-83
175TL 80-89
175STL 90-91
175 (Older Models) 77-79
155WTXZ 89-89
155WTXM 88-88
155WTX 85-92
155WTLZ 89-89
155WTLM 88-88
155WTL 85-92
155CWTX 87-87
155CTL 87-87
150TX 80-91
150TRX 83-83
150TRL 83-83
150TL 80-91
150STL 84-90
150CX 88-91
150 (Older Models) 77-79
REPLACEMENT FOR or COMPATIBLE WITH EVINRUDE:
E235TX 84-85
E235TRX 80-83
E235TRL 80-83
E235TL 84-85
E235STL 84-85
E235 (Older Models) 77-79
E225TX 86-87
E225TL 86-87
E225PX 87-87
E225PTX 86-86
E225PTL 86-86
E225PL 87-87
E225CX 87-87
E225CL 87-87
E225 (Older Models) 77-79
E200TX 87-87
E200TRX 80-83
E200TRL 80-83
E200STL 86-87
E200 (Older Models) 77-79
E185TX 84-85
E185TL 84-85
E175TX 85-91
E175TRX 80-83
E175TRL 80-83
E175TL 86-89
E175STL 90-91
E175 (Older Models) 77-79
E155WTX 85-95
E155WTL 85-95
E150TX 84-91
E150TRX 80-83
E150TRL 80-83
E150TL 84-91
E150STL 84-91
E150CX 88-91
E150 (Older Models) 77-79
mackenzie h.
Reviewed in the United States on September 20, 2024
Overall, I would recommend this starter. The starter itself seems to be made of good quality materials. The Vindex is a good quality and the starter works as it should. The only thing is when installing the stud for the negative battery terminal make sure to run a tap through the threads or you will break it off that is exactly what happened to me.
Sheryl Kuszak
Reviewed in the United States on July 16, 2024
Needed for a 1977 evinrude 200hp. Perfect fit. Easy to install.
Mark Hensarling
Reviewed in the United States on June 22, 2024
This starter bolted right up to my 89 Evinrude 150. Works perfectly. Only thing you might need to do is run a thread chaser through the ground bolt threads as mine was thick with powder coating or whatever they use. (Which is a good thing). I recommend this starter, and seller got it to me the next day. Very happy.
Customer
Reviewed in the United States on March 4, 2024
Starter worked great for the first summer, second summer I started having issues starting and couldn't figure out what was happening. After going through a bunch of testing, I finally determined that my motor was failing the air gap spark test, I pulled the top two spark plugs out and it passed the air gap test. This told me that the motor wasn't spinning over fast enough when under full compression, I checked the solenoid, all my batteries, starter connections, and wires and couldn't find the cause for the slow turn over. Ended up buying an OEM starter, installed it, and my motor started better than it ever has.TL/DR: Not worth the money, spend the extra money for a OEM quality starter
JWD333
Reviewed in the United States on July 9, 2023
I was concerned by some reviews stating problems with mounting holes lining up and proper pinion gear engagement with flywheel. I had neither problem. Tips that I would provide are: 1) Make sure your battery is disconnected as one of the mounting bolts is very close to the 12V to solenoid. 2) Use very light grease on the pinion gear and light oil on shaft - Sparingly. 3) Manually turn pinion gear to check teeth alignment into flywheel. Only test it out once you are sure it is good. I just did the repair and went onto the lake... Motor started flawlessly about a dozen times. Hope it lasts - see no reason it shouldn't. I'll update review if early failure happens.
Dan
Reviewed in the United States on November 30, 2022
My original starter was original OEM for my 1992 Johnson GT150 motor. I'm sure over the last 30 years it has become weaker before it failed, so perhaps what I am saying is trite, however, this new starter is Amazingly quick and strong to my perception. Took less than 10 minutes to swap out, perfect alignment of bolts, and first test of it equaled an instant start. No lag, no hesitation, no lack of strength at all. I would recommend to anyone with the GT150. Even if your starter hasn't failed but is acting sluggish, replace with this one.
Jason Grimm
Reviewed in the United States on October 24, 2022
Fit my Johnson 1989 GT 150 perfectly. I did need to find a new screw for the negative cable though. The original screw was standard of course but the hole in the new starter was tapped for a metric screw. I found a screw scavenging through my old screws that I never throw away. I think it was an M8. Install took about 30 min counting for 15 min looking for the right screw. Plenty of power to turn the motor over and start it.
Andrew D.
Reviewed in the United States on June 6, 2019
Starter works good but I had to take the old starter and remove the bushing and place it in the new. Make sure to check the spacing between the starter and the fly wheel. I found the bushing was rubbing the fly wheel. Other than that works as it should.
Recommended Products
$50.74
$ 23 .99 $23.99