andre
Reviewed in Canada on March 27, 2024
Valise forecast, Roulette intérieur non pivotante. La roulette d origine n avait pas de bearing et mesurait 66 mm et avait un rivet de 6 mm de diamètre et 35 mm de long. Le trou de la vis était maintenant plus grand j ai donc opté pour cette roulette de 64 mm avec vis 8mm. J ai donc du agrandir certains trou. Mon espace mesurait 27mm de large, les 2 petites rondelles n'étaient pas suffisant, épaisseur de la roue d origine 27 mm et la nouvelle 24 mm. j'ai du en ajouter 2 supplémentaire. J ai trouvé des roue de 27mm mais la vis était de 6 mm, à cause de mes trou défoncer,c'était la meilleure option. Maintenant elle roule mieux que quand elle était neuve. Livraison le lendemain. De très bonne qualité, je recommande.
Jeff w
Reviewed in the United States on November 7, 2024
Easy to replace broken luggage wheels. Plenty of YouTube videos for assistance. Good quality.
customer1234
Reviewed in the United States on September 4, 2023
Axle bore too large for this suitcase. They look like nice wheels otherwise.
marchdeals
Reviewed in the United States on August 27, 2023
I selected the ORO 64mm diameter & 24mm wide replacement wheels for my Eagle Creek Load Warrior LT22.I took a chance on these and I was right. Here are my dimensions for the old Eagle Creek Load Warrior LT22 wheels. You'll notice the wheel width at the axle for the Eagle Creek wheel is wider than the ORO luggage wheels.Wheels Width at axle: 1-1/8" or 28.6mmAxle thickness: 5/16" or 8mmWheel width: 15/16" or 23.8mmWheel diameter: 2-1/2" or 63.5mmInstructions: From the hardware bag you receive in your shipment save all four washers. The washers in the hardware bag from your shipment are a perfect match for the wheel bearing. These small washers will keep the wheels from rubbing the sides of the wheel slots. If you still have your old Eagle Creek Axles reuse them like I did. Get two 8mm or 5/16" stainless steel washers from your local hardware supply. These 8mm washers should be a little wider than the ORO washers and they will be about1mm thick. Locate an allen wrench for the old Eagle Creek socket head axle and an open ended 7/16" or 11mm wrench (nothing else will work) to tighten down the axle. Place the bag on its side such that you can balance a wheel in the slot without holding it. The tricky part is, and by all means find a better way to do this if you can, to balance the wheel on its side in the slot with all the washers in position as if the axle was already installed. An extremely small drop of glue to place the washers beforehand probably would have helped me get this done a lot faster but I was determined not to use any glue in case it decided to eventually get into the wheel bearings. The way I did it took many tries, a great deal of patience, and a lot of careful hand-eye coordination. I put the larger 8mm store bought washers towards the middle of the bag, leaving only the ORO small washers towards the outer side of the wheel bearings, but I don't think it really matters which side you put the big washers on. I would not use fender washers for the spacer washers but it's up to you to find out if fender washers work or not.I would say I might have wound up with about 1mm to 1.5mm of play left before I tightened the axles back up, making the total space the washers from ORO and the hardware supply total 3mm.I was however VERY frustrated by a bushing inside the wheels which I had to make sure was in perfect alignment on every attempt because it is LOOSE inside the wheels - that was a real bummer. BUT it's hard to beat the price of the ORO wheels versus completely replacing the entire Eagle Creek Load Warrior LT22 bag which I really like and is generally, well, just great....Good luck! :-)
Gord W.
Reviewed in Canada on November 8, 2023
Was able to replace some broken wheels on a roll-around suitcase. Ground the head off the old pins and these new ones fit well. Comes with two different lengths of pins. Recommend!
Arthur S.
Reviewed in the United States on June 7, 2022
Replacing the old wheels gave my wife's favorite roller board luggage a whole new life. Pretty straightforward repair using this wheel set.
Torylleigh
Reviewed in the United States on September 22, 2020
Used these to replace the wheels on my Pelican case. Works great
JayAE
Reviewed in the United States on December 31, 2020
Used these to replace the wheels on an adjustable workout bench. Perfect for the size I ordered.
Someone else
Reviewed in the United States on December 3, 2020
The only reason I didn't give this product 5 stars is because the replacement bars/axles were too short and wouldn't secure the wheel. To be fair, they did send two sets for what's probably the most common sizes, so I can't blame the seller for missing what I'm guessing is an unusual circumstance. The bearings are smooth and the wheels feel solid. After using 3rd party parts to put everything together, it's made the whole thing solid again. Overall, I'd call this a good buy.