Your cart is empty.
Your cart is empty.Product Description
Brand Name: OSCARBIDE
Material: High Speed Steel (HSS)
Weldon Shank: 3/4 inch
Cutting Depth: 2 inch
Number of Flats: 2
Number of Annular Cutter : 6pcs
Annular Cutter Bits Size: 9/16inch, 11/16inch, 13/16inch, 15/16inch, 1inch, 1-1/16inch
Number of Pilot Pin: 2pcs
Pilot Pin: 6.34x102mm（1/4“x4")
Premium Material
Made with premium high speed steel material, for longer service life and high heat resistance,the biggest advantage of HSS core drill is its ability to re-sharpen.
Features
Annular Cutters cut only the periphery of the hole,ejecting the remaining center as a slug.It produces accurate burr-free holes to close tolerances without pre-drilling or step drilling.
Best used with a drill press or magnetic drilling machine, both for their stability against high torque forces created by such a drill bit and lower RPMs compared to other types of drills. these cutters can be easily used with light duty drilling machines or portable magnetic base drilling machines.
- Time saving：The annular cutters have fewer teeth and less wear, therefore with an annular cutter holes can be made at higher or faster cutting speed and a faster feed rate of the drilling machine.
- Energy savings：Because annular cutters do not have to drill/cut through the complete work piece, they require less thrust and thus less energy to drill through material.
- More finishing：The hole made using an annular cutter is more finished, precise and accurate.
- Easy Using：Due to the unique geometry of the annular cutters, making holes at awkward angles is also very easy.
- Re-sharpening：can be easily re-sharpened on a grinding machine and can be re-used for drilling. Re-grinding can be done until the desired cutting length is available on the annular cutter.
No pre-step drilling is required; holes are cut in as little as 15 seconds
Processing
Aplication
Suitable for working with both ferrous and non-ferrous metals,cast iron, stainless steel, aluminum,copper,and plastic,wood, in either plate.
Annular Cutters can also be best used to make holes in pipes and tubes. Annular cutters help make holes in pipe and tubes without dimpling and deburring.
Processing Field
processing field such as engineering,rail transit, bridges, ships, machinery manufacturing, aerospace. Mild & Structural Steel.
Attention
- During the drilling process, the pilot pin will retract into the cutter allowing lubrication to reduce heat gain in the slug.
- Insert the ejector pin inside the annular cutter,never use an annular cutter without an ejector pin.
- Using lubricant or coolant with any type of annular cutter is a must. A correct lubrication and coolant delivery more life for annular cutters. HSS annular cutters required Cutting oil, not coolant.
Julián García
Reviewed in Mexico on March 31, 2025
Buen producto
Bruce J. Vahjen
Reviewed in the United States on April 13, 2023
2 holes per bit in mild steel. That’s all you get.
Recommended Products