Your cart is empty.
Your cart is empty.Product Description
The OTC blind hole bearing puller set is for those jobs requiring an internal pull. The set includes four collets sizes 7/16 inch to 1/2 inch, 9/16 inch to 11/16 inch, 5/8 inch to 1 inch, and 1 inch to 1-1/4 inch which fit a wide range of applications. Select the appropriate sized collet by comparing it with the application. Insert the collet, expand it to fit the hole, and then attach the slide hammer. Set includes a 2-1/2 pound slide hammer with a T-handle and comes housed in a blow-molded plastic storage case. Value is at the core of the OTC tool and equipment portfolio. For a simple repair or the most complex drivability concern, these award-winning tools universally solve problems faster, and at better value, than any other product line available. Whether it’s a specialty tool or unique piece of service equipment, OTC provides top solutions to modern automotive service challenges while increasing technicians’ productivity and shop profits.
From the Manufacturer
For pulling jobs requiring an internal pull, such as pilot bearings. Set includes four collets which fit a wide range of applications. Select the appropriate sized collet by comparing it with the application. Insert the collet, expand it to fit the hole, then attach the slide hammer assembly. Four collet sizes: 3/8" to 1/2", 9/16" to 11/16", 5/8" to 1", 1" to 1-1/4". Set includes a 2- 1/2 pound slide hammer with T-handle. Housed in a blow-molded plastic storage case.
William Horne
Reviewed in the United States on March 16, 2024
Works great. Has really helped me bushings out and holds up to the abuse.
Customer
Reviewed in the United States on February 8, 2024
If you’re buying this tool to remove rotary valve bearings from seadoo jet ski cases, it works great. Tool and attachments feel great feels like a quality tool. Bearing came out with ease very impressed.
Jose R. Rovirosa
Reviewed in the United States on March 2, 2023
Removes tough bearing races in seconds. Only complaint is that OTC doesn't currently stock a kit with a push/pull bridge included.
PAUL M.
Reviewed in the United States on January 1, 2022
Well made and easy to use. Make sure to locate the tool properly (shoulder back side of bearing) and maintain tightness on the collet. I was pulling 3/4” bushings with this tool that just weren’t coming out. I heated them and beat on them with the slide hammer puller and they just didn’t budge. I ended up splitting the bushings with a saw blade and then used this slide hammer puller to finally remove them. Worked good!
RamblinWreck
Reviewed in the United States on February 16, 2019
Well built tool. The grips will spread to cover the full range of diameters between highest and lowest. I beat the h#ll out of a couple of bearings to remove them and no damage to the the grips. But, you have to make sure they are fully engaged and the slide bar collinear with the bearing otherwise I believe you could knock off the edge of the grips.
D Burney
Reviewed in the United States on November 11, 2019
Purchased this tool for removing worn out bearings from idler bearings on Mail Processing equipment. (DBCS, DIOSS and CIOSS platform letter automation machines. maybe others. Each machine has over two thousand bearing. assemblies with at least two SKF 6001 bearings). 4581-1 is an exact fit to SKF 6001 bearing. Thousands of bearing assemblies will be rebuilt at a lesser cost with the help of this tool. Knowledge of proper usage of slide hammers should give many years of service. Happy camper
Customer
Reviewed in the United States on May 26, 2018
This works great for blind hole bearings that have a closed back end. You really have to get a strong, tight bite inside before pulling. I noticed other reviews suggesting the jaws broke off. I think this is from not having the jaws spread out enough.
Angelo barone
Reviewed in Canada on October 25, 2017
Works great
Mike Hrehorak
Reviewed in Canada on March 9, 2016
worked just fine
Customer
Reviewed in Canada on April 5, 2016
great tool for the price, I've used it several times so far with no problems
Steven
Reviewed in Canada on October 24, 2015
Perfect for anyone who does a lot of bearing repairs
Boothe
Reviewed in the United States on February 10, 2014
If you have bearings or bushings in a blind hole to pull this is the ticket. I'm only giving it four stars because the largest puller is almost too small for the biggest bearing in an NP231 transfer case. It worked, but the puller head was loose enough fully expanded that it was a difficult pull and it was pretty beat up after I was done. But other than that it worked great.
BvZ
Reviewed in Canada on December 14, 2014
Used it to remove the rear bearings from a motorcycle (KLR 650). Works like a charm and removed the old bearings without destroying them. A bit of heating with a blowtorch was required to get them moving.
Recommended Products
