Your cart is empty.
Your cart is empty.
Outlaw Racing bar risers will allow you to add from 3/4 to 1-1/2 overall height to handlebars
Universal fit to most all 7/8 handle bars
Have 3 different spacers to adjust to desired height
Bolt hole center to center is 35mm 7/8
To use simply remove the top clamp and install the desired spacers, then reinstall your top clamp and tighten back down with the longer bolts that are included
MLW
Reviewed in the United States on May 17, 2023
These used to be good, now they are machined wrong and a useless waste of time. -BWX
Eric L
Reviewed in the United States on June 30, 2021
Great adjustability and a great deal. Not too difficult to install but using the O.E. top clamp to secure the bars leaves a 1/4" gap between it and the riser blocks on my '20 CRF250L. Despite that the bars remain secure even after a wipe out, although I have triple clamp/bar end mounted bark busters that add rigidity. These work well on a 250L which has ergonomics for small people and that makes standing awkward for anyone over 5'6" or so. Your mileage may vary.
Brett M.
Reviewed in the United States on September 5, 2020
Great fit and appearance on my Brozz 250. The finish is much better than in the photos in the Amazon listing. The pieces are machined, not cast. Another post said to use tape to hold the pieces together when installing. Great suggestion!
Michael
Reviewed in the United States on September 19, 2020
Better then the picture description. Worked great to raise up my ATV’s handlebars. Finish is a shiny polished metal not dull like the picture. Comes with several lengths of bolts. Hex head bolt top also. Took the recommendation of another person who used tape to hold the different thickness shims together while installing and worked great.
Customer
Reviewed in the United States on August 11, 2020
if your not sure what you want for a rise on our bars get these they work great and you can adjust the rise from 1/4 to 1 3/4in easy to install and adjust till you get the result you want can even do it on the trails or road takes just a few minutes to add or remove a spacer
john
Reviewed in the United States on June 20, 2020
Didn't exactly fit my Triumph Speed Triple because the bottom bump part didn't sit flush, so be prepared to grind them down.But they are super convenient, come with parts for 3 different heights so you can adjust to the limits of you brake and shifter lines.And great price.
Alchymyst
Reviewed in the United States on August 22, 2016
Nice fit and finish and did the job right. Looks just like factory alum on my Moto Guzzi EV11 and got my bars to a much more comfortable height. Great product for the money.
tbb10785
Reviewed in the United States on April 21, 2015
Purchased for my Honda CRF250Lwith stock/OEM handle bar. I used all the spacers which required loosening the wires attached to the bars, and everything just fits with no binding at full lock. With the bar raised I can now stand a lot more comfortably on the pegs while trail riding. FYI, I'm about 6 ft 1 in tall.
Recommended Products
