Your cart is empty.
Your cart is empty.Product Description
Product Description:
1. 38mm \48mm\58mm three sizes are available. Note: Please check the size of your toilet lid hole before purchasing.
2. Installation is simple and fast, saves time and effort, you can rest assured to buy!
3. The button spring is made of high quality 304 stainless steel wire, which is durable and elastic.
4. Owfeel Toilet Tank Button is easy to disassemble and install, and it's structure is simple and not easy to damage.
5. Using the high-end plating technology, multi-layer plating process, high brightness and ultra-smooth surface, long-lasting.
6. The total length of the torsion bar is 10CM, the rotation length can be shortened and extended. You can adjust the length according to your needs.
carmen siegel
Reviewed in the United States on February 26, 2025
Excellent product! Easy to install, even for a 60+ year old who never did this before. Just had to trim the screw part that flushes the toilet.
Bill N.
Reviewed in the United States on January 1, 2025
Replaced my old unknown unit on a generic toilet. I screwed the rods all the way in, cut off maybe 1/4"and then adjusted them down to just touch the top of the valve. Works perfectly.
Client d'
Reviewed in Canada on April 12, 2025
Les tiges étaient trop longues mais j’ai pus changer avec celle que j’avais déjà
Jim Tadlock
Reviewed in the United States on September 18, 2024
The appearance: these button set looks pretty good.It is smooth operating and does job very well.One thing I didn’t like about it, the rods were too short.I had to scavenge some out of my old set to be able to flush the toilet..
Mark Loving
Reviewed in the United States on November 29, 2024
I had been looking for a replacement flushing toilet button but everything I found was not right size or was of poor quality. Finally more research turned up this product and it is right size and very good quality. Very satisfied with this product and delivery.
Inabon Yunes
Reviewed in the United States on October 16, 2024
Nice looking buttons, but extremely fragile; made of cheap plastic, looks like a toy. It seems I will have to paint my old one, that is much better quality. No more buying from this vendor.
J-2Da-B
Reviewed in the United States on November 8, 2022
We have 5 of these toilets in the house, and we made the mistake of using bleach tablets in our tanks. Unfortunately, such buttons are mostly made of plastic, with a chrome coating. The problem here is that bleach tablets put off chlorine fumes, and that will erode/corrode the buttons, causing them to turn green, and the chrome coating to come flaking off. We didn't know this, so we ruined the ones that came installed in our home when construction was complete. We needed replacements, and the 5 of these that we ordered did the job PERFECTLY!These are still plastic, but now we know not to use those bleach tablets. For those who MUST use bleach tablets, you'll want flush knobs made of metal...like stainless steel. Those will cost more, but we know what not to do now, so these buttons work just fine, and we'll keep them in great shape going forward. They are priced great, and were a perfect fit. They can be adjusted on the under-side if they need to reach a bit further down into the tank, or if they need to shorten the reach a bit. Simple 2-minute install for each toilet made this easily a 20 minute job for me, across 5 toilets, when counting the time it took me to get from toilet to toilet as well.Highly recommended item!
Mary R Smith
Reviewed in the United States on May 14, 2021
Easy to install and looks great but, the smaller button must be held down while it flushes or the bowl doesn’t fill .
It's A London Fing
Reviewed in Canada on August 14, 2019
So it's plastic instead of metal. Do I care? Nah, it fits perfectly, a very clean look. Mine didn't have the brand on the top, as shown on Amazon, and that's a good thing for me. Honestly, it looks like it came with the toilet. I had to cut 1/4-inch off the adjustable screw threads but that was dead easy to do with a sharp knife.
kevin seattle
Reviewed in the United States on May 3, 2019
I have 4 Sterling brand toilets in a home 8 years old, now used as a rental. The original flush buttons have these flimsy hollow green/black "straws" that eventually break. This replacement is sturdier. It is adjustable by cutting the solid threaded rod to length, then fine adjustments with the threaded plastic rod and locking ring. I used a utility blade to cut it, and a dime works well as the screwdriver. Note that these have a bonus feature of interior spring that keeps the buttons flush. My original buttons rested on the actual toilet mechanism, so were not flush with each other. Also, as pictured, no logo on mine (which I prefer). Did I mention solid rods vs. hollow? I think this is a good design. Also, best part, these are 1/3 the cost of replacement OEM parts. Definitely get these if your original broke, I'm going to preemptively replace the buttons on my other 3 toilets, it's a great upgrade.
H. Yee
Reviewed in Canada on November 1, 2019
Fits nicely. Easy install. Just have to cut stems to size.
Darla Hennessey Green
Reviewed in Canada on October 8, 2019
Perfect!Does what it’s suppose to do.
john Burton
Reviewed in the United Kingdom on October 17, 2019
Ok
Recommended Products
$27.99
$ 11 .99 $11.99